Tunable particle separation in a hybrid dielectrophoresis (DEP)- inertial microfluidic device

Particle separation is indispensable in many microfluidic systems and holds a broad range of biomedical applications. Inertial microfluidic devices that work solely on intrinsic hydrodynamic forces and inertial effects can offer label-free, high throughput and high efficiency separation performance. However, the working range of the current inertial microfluidic systems is obtained by tailoring the inertial lift forces and secondary flow drag through flow speed. Each channel design is normally effective for specific target particles, which inevitably lacks the flexibility for various particle mixtures. Redesigning the structure and dimension of microchannels for new sets of particle mixtures is often time-consuming and expensive. In this work, by introducing an external dielectrophoretic force field and coupling it with inertial forces, we proposed here an innovative hybrid DEP-inertial microfluidic platform for particle tunable separation. The working principle of the device was explained and its functionality was validated by experiments. In addition, the dimension of target particle mixture can be varied by adjusting the electrical voltage without redesigning the channel structure or dimensions. It is expected that the proposed DEP-inertial concept can work as a flexible platform for a wide range of biomedical applications

Redox flow desalination based on the temperature difference as a driving force

How to effectively reduce the consumption of electrical energy is a key topic in many studies of electrochemical desalination. In this work, we use the temperature difference to drive a continuous process of dialysis desalination. The system consists of a thermoelectric unit and a desalination unit connected in series. The thermoelectric unit includes a thermoelectric generator (TEG), a heater as heat source and an air-cooled heat sink to generate electricity and for the desalination unit. The desalination unit contains two platinum-coated hydrophobic carbon cloths as current collectors, a mixture of [Fe(CN)6]3-/4- as anolyte and catholyte, concentrated and diluted salt streams with two cationic and one anionic exchange membranes separated configuration (CEM|AEM|CEM). During the charging process driven by temperature difference, chloride and sodium ions in the diluted salt stream move to the concentrated salt stream and cathodic reservoir, respectively. The results show that the concentration of brine drops significantly from 5,000 ppm to 344.3 ppm as the current decreases to 0.06 mA from the initial 1.30 mA when the temperature difference is maintained at 65 K. Concurrently, the average salt removal rate is up to 8.8 μg cm-2 min-1 and average heat consumption is 284.3 MJ mole-1. Moreover, the influences from the temperature difference, salt feeds content and electrolyte concentration are also investigated in detail. This research has the potential application for the freshwater obtainment via the utilization of waste heat, and will be significant in places with the shortage of the electrical energy such as ships, islands and oceans with the temperature differences

The Genomes of Oryza sativa: A History of Duplications

We report improved whole-genome shotgun sequences for the genomes of indica and japonica rice, both with multimegabase contiguity, or almost 1,000-fold improvement over the drafts of 2002. Tested against a nonredundant collection of 19,079 full-length cDNAs, 97.7% of the genes are aligned, without fragmentation, to the mapped super-scaffolds of one or the other genome. We introduce a gene identification procedure for plants that does not rely on similarity to known genes to remove erroneous predictions resulting from transposable elements. Using the available EST data to adjust for residual errors in the predictions, the estimated gene count is at least 38,000–40,000. Only 2%–3% of the genes are unique to any one subspecies, comparable to the amount of sequence that might still be missing. Despite this lack of variation in gene content, there is enormous variation in the intergenic regions. At least a quarter of the two sequences could not be aligned, and where they could be aligned, single nucleotide polymorphism (SNP) rates varied from as little as 3.0 SNP/kb in the coding regions to 27.6 SNP/kb in the transposable elements. A more inclusive new approach for analyzing duplication history is introduced here. It reveals an ancient whole-genome duplication, a recent segmental duplication on Chromosomes 11 and 12, and massive ongoing individual gene duplications. We find 18 distinct pairs of duplicated segments that cover 65.7% of the genome; 17 of these pairs date back to a common time before the divergence of the grasses. More important, ongoing individual gene duplications provide a never-ending source of raw material for gene genesis and are major contributors to the differences between members of the grass family

CISPNet: Automatic Detection of Remote Sensing Images from Google Earth in Complex Scenes Based on Context Information Scene Perception

The ability to detect small targets and the speed of the target detector are very important for the application of remote sensing image detection, and in this paper, we propose an effective and efficient method (named CISPNet) with high detection accuracy and compact architecture. In particular, according to the characteristics of the data, we apply a context information scene perception (CISP) module to obtain the contextual information for targets of different scales and use k-means clustering to set the aspect ratios and size of the default boxes. The proposed method inherits the network structure of Single Shot MultiBox Detector (SSD) and introduces the CISP module into it. We create a dataset in the Pascal Visual Object Classes (VOC) format, annotated with the three types of detection targets, aircraft, ship, and oiltanker. Experimental results on our remote sensing image dataset as well as the Northwestern Polytechnical University very-high-resolution (NWPU VRH-10) dataset demonstrate that the proposed CISPNet performs much better than the original SSD and other detectors especially for small objects. Specifically, our network can achieve 80.34% mean average precision (mAP) at the speed of 50.7 frames per second (FPS) with the input size 300 × 300 pixels on the remote sensing image dataset. On extended experiments, the performance of CISPNet in fuzzy target detection in remote sensing image is better than that of SSD

On-Chip Microparticle and Cell Washing Using Coflow of Viscoelastic Fluid and Newtonian Fluid

This work investigates the on-chip washing process of microparticles and cells using coflow configuration of viscoelastic fluid and Newtonian fluid in a straight microchannel. By adding a small amount of biocompatible polymers into the particle medium or cell culture medium, the induced viscoelasticity can push particles and cells laterally from their original medium to the coflow Newtonian medium. This behavior can be used for particle or cell washing. First, we demonstrated on-chip particle washing by the size-dependent migration speed using coflow of viscoelastic fluid and Newtonian fluid. The critical particle size for efficient particle washing was determined. Second, we demonstrated continuous on-chip washing of Jurkat cells using coflow of viscoelastic fluid and Newtonian fluid. The lateral migration process of Jurkat cells along the channel length was investigated. In addition, the cell washing quality was verified by hemocytometry and flow cytometry with a recovery rate as high as 92.8%. Scanning spectrophotometric measurements of the media from the two inlets and the two outlets demonstrated that diffusion of the coflow was negligible, indicating efficient cell washing from culture medium to phosphate-buffered saline medium. This technique may be a safer, simpler, cheaper, and more efficient alternative to the tedious conventional centrifugation methods and may open up a wide range of biomedical applications

Mechanical Properties, Thermal Stability and Microstructures of W-Re-ZrC Alloys Fabricated by Spark Plasma Sintering

Tungsten materials, used as friction stir welding tools, undergo severe plastic deformation and even collapse at high operating temperatures. In order to improve the low-temperature toughness and high-temperature strength, W-10wt.%Re-0.5wt.%ZrC alloys were processed by high-energy ball milling and subsequent spark plasma sintering. Single solid-solution W-Re powders with typical body-centered cubic structures were achieved when the milling time increases to 50 h. The microhardness, tensile properties, thermal stability and microstructures of this sintered W-10wt.%Re-0.5wt.%ZrC alloys were investigated. Synergetic effects of the solute Re and nanosized dispersion particles induce improvements in low-temperature toughness and high-temperature strength. The alloy suffers ductile fracture at 300 °C, which is about 400 °C and 300 °C lower than that of the spark plasma sintered pure W and W-0.5wt.%ZrC, respectively. Besides, this W-10wt.%Re-0.5wt.%ZrC has a high ultimate tensile strength of 818 MPa and uniform elongation of ~ 8.1% at 300 °C. Moreover, the microstructures and hardness remain stable even after 1500 °C anneal. Based on a detailed microstructure analysis, the mechanisms for the enhanced strength, low-temperature ductility and high thermal stability are proposed and discussed. Grain boundary mobility is impeded by the kinetics constraint through dispersed particles pinning and solute Re atoms dragging, which leads to improved thermal stability. The formation of Zr-C-O particles is most probably attributed to ZrC particles capturing and interacting with impurity oxygen during sintering

Microstructure Characteristics and Corrosion Resistance of Friction Stir Welded 2205 Duplex Stainless Steel

In this study, 2205 duplex stainless steel was friction-stir-welded at different welding speeds. The microstructural characteristics such as grain sizes, grain boundary misorientation angles, and phase contents in the stir zones of the joints were detected. The potentiodynamic polarization and electrochemical impedance spectroscopy were also measured to evaluate the corrosion property of the stir zones. The effects of the microstructures on the corrosion property for friction-stir-welded 2205 duplex stainless steel were analyzed. The results indicated that the FSW process refined the grains and increased the ferrite contents in the stir zones. With increasing the welding speed from 30 mm/min to 50 mm/min, the grain size in the stir zone decreased from 1.64 μm to 0.96 μm, the ferrite content decreased from 59% to 54.4%, and the fractions of low angle grain boundaries for austenite and ferrite phases decreased from 63.9% and 92.6% to 18.0% and 41.1%, respectively. In this study, the effect of grain size on the corrosion resistance was the most significant and it was followed by the phase composition and the grain boundary misorientation angle. The stir zone obtained at 50 mm/min has the highest corrosion resistance, and it is followed by the base material and the stir zone obtained at 30 mm/min

Energy saving and carbon reduction schemes for hospital with photovoltaic power generation and system upgrading technology

In order to help China achieve the double carbon target of total carbon peak and high-quality sustainable economic development, and to enrich the work and content of energy conservation and emission reduction in the building sector, the most complex and energy-consuming hospitals are taken as the key projects for energy conservation and emission reduction to carry out feasibility studies. The reasons for the high energy consumption of the existing hospital buildings were analysed, and it was proposed to upgrade the existing systems (including air conditioning, hot water system and intelligent control system) and to generate photovoltaic power for the existing buildings, taking into account the characteristics of the local climate. The results of the study showed that the energy saving and emission reduction effect of the hospital was obvious after the programme was adopted

Characterization of Klebsiella pneumoniae ST11 Isolates and Their Interactions with Lytic Phages

The bacterial pathogen Klebsiella pneumoniae causes urinary tract infections in immunocompromised patients. Generally, the overuse of antibiotics contributes to the potential development and the spread of antibiotic resistance. In fact, certain strains of K. pneumoniae are becoming increasingly resistant to antibiotics, making infection by these strains more difficult to treat. The use of bacteriophages to control pathogens may offer a non-antibiotic-based approach to treat multidrug-resistant (MDR) infections. However, a detailed understanding of phage–host interactions is crucial in order to explore the potential success of phage-therapy for treatment. In this study, we investigated the molecular epidemiology of nine carbapenemase-producing K. pneumoniae isolates from a local hospital in Shanghai, China. All strain isolates belong to sequence type 11 (ST11) and harbor the blaKPC-2 gene. The S1-PFGE (S1 nuclease pulsed field gel electrophoresis) pattern of the isolates did not show any relationship to the multilocus sequence typing (MLST) profiles. In addition, we characterized phage 117 and phage 31 and assessed the potential application of phage therapy in treating K. pneumoniae infections in vitro. The results of morphological and genomic analyses suggested that both phages are affiliated to the T7 virus genus of the Podoviridae family. We also explored phage–host interactions during growth in both planktonic cells and biofilms. The phages’ heterogeneous lytic capacities against K. pneumoniae strains were demonstrated experimentally. Subsequent culture and urine experiments with phage 117 and host Kp36 initially demonstrated a strong lytic activity of the phages. However, rapid regrowth was observed following the initial lysis which suggests that phage resistant mutants were selected in the host populations. Additionally, a phage cocktail (117 + 31) was prepared and investigated for antimicrobial activity. In Luria Broth (LB) cultures, we observed that the cocktail showed significantly higher antimicrobial activity than phage 117 alone, but this was not observed in urine samples. Together, the results demonstrate the potential therapeutic value of phages in treating K. pneumoniae urinary tract infections