Chloride Transport of High Alumina Cement Mortar Exposed to a Saline Solution

Chloride transport in different types of high alumina cement (HAC) mortar was investigated in this study. Three HAC cement types were used, ranging from 52.0 to 81.1% of aluminum oxides in clinker. For the development of the strength, the setting time of fresh mortar was measured immediately after mixing and the mortar compressive strength was cured in a wet chamber at 25 ± 2°C and then measured at 1–91 days. Simultaneously, to assess the rate of chloride transport in terms of diffusivity, the chloride profile was performed by an exposure test in this study, which was supported by further experimentation including an examination of the pore structure, chloride binding, and chemical composition (X-ray diffraction) analysis. As a result, it was found that an increase in the Al2O3 content in the HAC clinker resulted in an increase in the diffusion coefficient and concentration of surface chloride due to increased binding of chloride. However, types of HAC did not affect the pore distribution in the cement matrix, except for macro pores

A Simple Numerical Method for Pricing an American Put Option

We present a simple numerical method to find the optimal exercise boundary in an American put option. We formulate an intermediate function with the fixed free boundary that has Lipschitz character near optimal exercise boundary. Employing it, we can easily determine the optimal exercise boundary by solving a quadratic equation in time-recursive way. We also present several numerical results which illustrate a comparison to other methods

Dynamic experiment of active accelerator pedal system with a coreless tubular electromagnetic linear actuator

An automobile active accelerator pedal (AAP) warns the driver about an emergency. A tubular electromagnetic linear actuator is the key component to create an impact or vibration, but it has a large cogging force due to a steel core that causes instabilities. Accordingly, we propose an AAP with a coreless tubular electromagnetic linear actuator, and verify its performance using dynamic experiments

Impact of Vegetation on Land-Atmosphere Coupling Strength and Its Implication for Desertification Mitigation over East Asia

Desertification of the East Asian drylands and the consequent dust transport have been serious concerns for adjacent Asian countries as well as the western United States. Tree planting has been considered one applicable strategy to mitigate the desertification. However, the desired effect of the tree planting would not be brought to fruition unless the newly planted trees change the coupling characteristics between the land and the atmosphere. Based on this perception, we attempt to clarify the effects of vegetation on the coupling strength between the atmosphere and land surface, and we suggest the most efficient areas of tree planting for desertification mitigation in East Asia. Using regional vegetation-atmosphere coupled model simulations, coupling strength with and without vegetation was computed and compared with each other. An increased vegetation fraction reduces the coupling strength in June, July, and August (JJA), primarily due to decreased evapotranspiration variability. This effect is pronounced over the Manchurian Plains and the highly populated areas of Beijing and Tianjin. The reduced coupling strength tends to weaken feedback between soil moisture and precipitation as a maintenance mechanism of warm season droughts in the midlatitudes and subsequently decrease the probability of droughts, a finding that is reflected in the enhanced JJA mean soil moisture. However, some drylands like the eastern edges of the Gobi desert present marginal or even opposite changes in coupling strength, meaning a limited effect of vegetation on relieving droughts. Therefore, given limited financial and human resources, acupuncture-like afforestation, i.e., concentrated tree planting in a particular region where the coupling strength can be substantially reduced by vegetation, is an effective strategy to secure long-standing desertification mitigation

Cases of ethical violation in research publications: through editorial decision making process

Purpose – To improve and strengthen existing publication and research ethics, KODISA has identified and presented various cases which have violated publication and research ethics and principles in recent years. The editorial office of KODISA has been providing and continues to provide advice and feedback on publication ethics to researchers during peer review and editorial decision making process. Providing advice and feedback on publication ethics will ensure researchers to have an opportunity to correct their mistakes or make appropriate decisions and avoid any violations in research ethics. The purpose of this paper is to identify different cases of ethical violation in research and inform and educate researchers to avoid any violations in publication and research ethics. Furthermore, this article will demonstrate how KODISA journals identify and penalize ethical violations and strengthens its publication ethics and practices. Research design, data and methodology – This paper examines different types of ethical violation in publication and research ethics. The paper identifies and analyzes all ethical violations in research and combines them into five general categories. Those five general types of ethical violations are thoroughly examined and discussed. Results – Ethical violations of research occur in various forms at regular intervals; in other words, unethical researchers tend to commit different types of ethical violations repeatedly at same time. The five categories of ethical violation in research are as follows: (1) Arbitrary changes or additions in author(s) happen frequently in thesis/dissertation related publications. (2) Self plagiarism, submitting same work or mixture of previous works with or without using proper citations, also occurs frequently, but the most common type of plagiarism is changing the statistical results and using them to present as the results of the empirical analysis; (3) Translation plagiarism, another ethical violation in publication, is difficult to detect but occurs frequently; (4) Fabrication of data or statistical analysis also occurs frequently. KODISA requires authors to submit the results of the empirical analysis of the paper (the output of the statistical program) to prevent this type of ethical violation; (5) Mashup or aggregator plagiarism, submitting a mix of several different works with or without proper citations without alterations, is very difficult to detect, and KODISA journals consider this type of plagiarism as the worst ethical violation. Conclusions – There are some individual cases of ethical violation in research and publication that could not be included in the five categories presented throughout the paper. KODISA and its editorial office should continue to develop, revise, and strengthen their publication ethics, to learn and share different ways to detect any ethical violations in research and publication, to train and educate its editorial members and researchers, and to analyze and share different cases of ethical violations with the scholarly community

Monoclinic and Correlated Metal Phase in VO_2 as Evidence of the Mott Transition: Coherent Phonon Analysis

In femtosecond pump-probe measurements, the appearance of coherent phonon oscillations at 4.5 THz and 6.0 THz indicating the rutile metal phase of VO_2 does not occur simultaneously with the first-order metal-insulator transition (MIT) near 68^oC. The monoclinic and correlated metal(MCM) phase between the MIT and the structural phase transition (SPT) is generated by a photo-assisted hole excitation which is evidence of the Mott transition. The SPT between the MCM phase and the rutile metal phase occurs due to subsequent Joule heating. The MCM phase can be regarded as an intermediate non-equilibrium state.Comment: 4 pages, 2 figure

Valuation of Credit Derivatives with Multiple Time Scales in the Intensity Model

We propose approximate solutions for pricing zero-coupon defaultable bonds, credit default swap rates, and bond options based on the averaging principle of stochastic differential equations. We consider the intensity-based defaultable bond, where the volatility of the default intensity is driven by multiple time scales. Small corrections are computed using regular and singular perturbations to the intensity of default. The effectiveness of these corrections is tested on the bond price and yield curve by investigating the behavior of the time scales with respect to the relevant parameters