Synthesis high specific surface area nanotube g-C3N4 with two-step condensation treatment of melamine to enhance photocatalysis properties

High specific surface area nanotube g-C3N4 was fabricated by a simple two-step condensation method. Photocatalytic activity was evaluated by decomposition of Rhodamine B (Rh B) under visible light. Nanotube g-C3N4 showed 12 times higher photocatalytic activity than bulk g-C3N4. The improvement of photocatalytic activity was mainly due to the higher surface area, the unique morphology and the number of defects

Additive Manufacturing Of SiC-Sialon Refractory With Excellent Properties By Direct Ink Writing

Additive manufacturing of SiC-Sialon refractory with complex geometries was achieved using direct ink writing processes, followed by pressure less sintering under nitrogen. The effects of particle size of SiC powders, solid content of slurries and additives on the rheology, thixotropy and viscoelasticity of ceramic slurries were investigated. The optimal slurry with a high solid content was composed of 81 wt% SiC (3.5 µm+0.65 µm), Al2O3 and SiO2 powders, 0.2 wt% dispersant, and 2.8 wt% binder. Furthermore, the accuracy of the structure of specimens was improved via adjustment of the printing parameters, including nozzle size, extrusion pressure, and layer height. The density and flexural strength of the printed SiC-Sialon refractory sintered at 1600 °C were 2.43 g/cm3 and 85 MPa, respectively. In addition, the printed SiC-Sialon crucible demonstrated excellent corrosion resistance to iron slag. Compared to the printed crucible bottom, the crucible side wall was minimally affected by molten slag

Porous cerium dioxide hollow spheres and their photocatalytic performance

Uniform-sized and monodiperse cerium dioxide porous hollow spheres (CeO2-PH) based on the Ostwald ripening process were fabricated by a simple solvothermal method in the absence of any templates. The structure and morphology of CeO2-PH and CeO2-NP (cerium dioxide nanoparticles) were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and Brunauer–Emmett–Teller (BET) surface area analysis. The average diameter of face-centered cubic (fcc) phase CeO2-PH was ca. 160 nm with a high specific surface area, and it is composed of small crystal grain particles (ca. 10 nm). Furthermore, CeO2-PH has high activity for the evaluation of acetaldehyde decomposition. Optical, defect, and chemical state properties were characterized by Raman spectra, ultraviolet-visible absorption spectroscopy (UV-vis), and X-ray photoelectron spectroscopy (XPS). The presence of Ce3+ ions narrowed the band gap of CeO2-PH, resulting in the high light harvesting. The large amount of oxygen vacancy defects provided many activity sites on CeO2-PH in the photocatalytic process. The formation scheme and photocatalyic mechanism will be discussed in this paper

Dependence of photocatalytic activity on aspect ratio of a brookite TiO2 nanorod and drastic improvement in visible light responsibility of a brookite TiO2 nanorod by site-selective modification of Fe3+ on exposed faces

Exposed crystal face-controlled brookite titanium(IV) oxide (TiO2) nanorods with various aspect ratios were prepared by a hydrothermal process with or without PVA or PVP as an aspect reagent. The nanorod-shaped brookite TiO2 had larger {2 1 0} and smaller {2 1 2} exposed crystal faces, which were assigned by TEM with the SAED technique. Their aspect ratios were greatly influenced by the addition of PVA or PVP as an aspect ratio control reagent to the reaction solution used in the hydrothermal treatment. The photocatalytic activity for decomposition of acetaldehyde increased with increase in the aspect ratio because the surface area ratio of {2 1 0} to {2 1 2} exposed crystal faces, which are attributed to reduction and oxidation sites, respectively, became more optimal. The {2 1 2} exposed crystal faces of surface-controlled brookite TiO2 were site-selectively modified with trivalent iron(III) (Fe3+) ions by utilizing the adsorption property of iron(III)/iron(II) (Fe3+/Fe2+) ions. The brookite TiO2 nanorod with site-selective modification of Fe3+ ions showed much higher photocatalytic activity than that of commercial brookite TiO2 loaded with Fe ions under visible-light irradiation because of the separation of redox sites. In other words, oxidation and reduction proceed over Fe3+ ion-modified {2 1 2} faces of the TiO2 surface and on {2 1 0} faces of the TiO2 surface without modification of Fe3+, respectively

A facile approach to build Bi2O2CO3/PCN nanohybrid photocatalysts for gaseous acetaldehyde efficient removal

Constructing heterojunction between two semiconductors is a cost-effective pathway to fabricate efficient photocatalysts for environmental remediation and energy-related applications, which is with profound significance and high desirability to contemporary era. In this work, we demonstrate an extremely facile approach to couple bismuth subcarbonate with polymeric carbon nitride (denoted as BIOC@PCN) by ion exchange between home-made rose-like Bi2O2(OH)(NO3) (denoted as BION) and PCN bulks at 433 K solvothermal condition. PCN bulks play multi-roles in this ingenious one-pot method. Firstly, PCN bulks guarantee the negatively charged surface to anchor plentiful bismuth precursor salts. More importantly, solvothermal treatment affords a weak basic and sufficient CO32− ions environment to promote the following ion exchange reaction. The evolution of morphology, components and structure from rose-like BION to BIOC@PCN were symmetrically characterized by means of SEM, HR-TEM, XRD, FTIR, TG, UV–vis, BET-BJH and XPS. The as-prepared nanohybrid photocatalyst (0.5BIOC@PCN) presents optimal photocatalytic performance for gaseous acetaldehyde removal, which is showing 10, 6.5 and 2 times higher than that of the PCN-Bulk, BION and mechanical mixed BIOC/PCN counterparts, respectively. Transient photocurrent response and EPR results further verify the validity of the established heterojunction of BIOC@PCN in facilitating the separation of charge carriers. The performance improvement gains from the efficient separation of charge carriers in BIOC@PCN heterojunction, manifested by PL spectra, transient photocurrent response and EPR results. In this study, a facile and cost-effective approach to build PCN-based nanohybrid photocatalysts for gaseous acetaldehyde efficient removal was established

Aggregation-Induced Emission (AIE), Life and Health

Light has profoundly impacted modern medicine and healthcare, with numerous luminescent agents and imaging techniques currently being used to assess health and treat diseases. As an emerging concept in luminescence, aggregation-induced emission (AIE) has shown great potential in biological applications due to its advantages in terms of brightness, biocompatibility, photostability, and positive correlation with concentration. This review provides a comprehensive summary of AIE luminogens applied in imaging of biological structure and dynamic physiological processes, disease diagnosis and treatment, and detection and monitoring of specific analytes, followed by representative works. Discussions on critical issues and perspectives on future directions are also included. This review aims to stimulate the interest of researchers from different fields, including chemistry, biology, materials science, medicine, etc., thus promoting the development of AIE in the fields of life and health

A self-biased GaN LNA with 30 dB Gain and 21 dBm P1dB for 5G communications

We present a self-biased three-stage GaN-based monolithic microwave integrated circuit low-noise amplifier (LNA) operating between 26 and 29 GHz for 5G mobile communications. The self-biasing circuit, common-source topology with inductive source feedback, and RLC negative feedback loops between gate and drain of the third transistor were implemented to achieve low noise, good port match, high stability, high gain, and compact size. Measurement results show that the LNA has a high and flat gain of 30.5 ± 0.4 dB with noise figure (NF) of 1.65–1.8 dB across the band. The three-stage topology also achieves high linearity, providing the 1 dB compression point output power (P1dB) of 21 dBm in the band. To our knowledge, this combination of NF, gain, and linearity performance represents the state of art of self-biased LNA in this frequency band