Supported liquid membranes modification with sulphonated poly(ether ether ketone). Permeability, selectivity and stability

The development of a new type of composite membrane consisting of a microfiltration support membrane, an immobilised liquid membrane phase and a hydrophilic, charged polymer layer and its function as a supported liquid membrane (SLM) for copper selective transport are described. The ion-exchange layers function as stabilisation layers to improve the membrane lifetime and consist of sulphonated poly(ether ether ketone) (SPEEK). This polymer shows a high permeability for copper ions due to the presence of fixed negative charges and to its swelling capacity in an aqueous phase. A method was developed to prepare composite membranes composed of the support membranes Celgard with one stabilisation layer on either the feed or strip side of the membrane or on both sides. Good adhesion of homogeneous, negatively charged, hydrophilic SPEEK layers to the hydrophobic macroporous support membranes could only be established when the support membranes were first hydrophilised with a concentrated sulphuric acid solution containing 5 wt% free SO3. The lifetime of the SLMs is significantly improved when one stabilisation layer is applied at the strip side or two layers at both sides of the SLM. A second advantage of this composite SLM is the increase in copper flux caused by a decrease in thickness of liquid membrane phase. However, when SPEEK penetrates entirely through some pores of the support membrane, ions diffuse non-specifically through the SPEEK matrix resulting in an undesired selectivity loss. This phenomenon occurs only when thin Celgard membranes are used as support membranes

Effect of void-carbon on blue-shifted luminescence in TADF molecules by theoretical simulations

Thermally activated delayed fluorescence (TADF) molecules have a theoretical 100% photoluminescence quantum yield in comparison with traditional fluorescent materials, leading to broad application in organic light-emitting diode (OLED). However, the application of TADF molecules with conjugated donor-acceptor structures in blue OLED remains a challenge due to their generally narrow energy gap between frontier molecular orbitals. Recently, a strategy has been approved in the improvement of the performance in TADF, in which void-carbon atoms between donor and acceptor fragments (donor-void-acceptor (D-v-A)) could regulate blue light emission. In this study, we first select three reported isomers followed by two proposed D-v-A TADF isomers to verify the feasibility of the void-carbon strategy through evaluation of the electronic structures in the excited state and photophysical properties. We further proposed a series of TADF molecules by replacing different donor and acceptor fragments to assess the applicability of the void-carbon strategy from the aspect of simulations in electronic structures, different properties of donor and acceptor fragments, photophysical properties, and analysis in the molecular conjugation. The results indicate that void-carbon strategy has conditional feasibility and applicability. Donor-acceptor molecular properties could be tuned through void-carbon strategy on aromatic acceptor fragments during the selection of promising candidates of TADF molecules. However, the void-carbon strategy does not work for the molecules with antiaromatic acceptor fragments, where the steric hindrance of the molecules plays a dominant role. Our work provides insightful guidance for the design of the blue-emission TADF molecules

Serum Levels of Adipocyte Fatty Acid-Binding Protein Are Associated with the Severity of Coronary Artery Disease in Chinese Women

BACKGROUND: Adipocyte fatty acid-binding protein (A-FABP) has been described as a novel adipokine, playing an important role in the development of metabolic syndrome, type 2 diabetes and atherosclerosis. In this study, we investigated the relationship between serum levels of A-FABP and the presence and severity of coronary artery disease (CAD) in Chinese subjects. METHODOLOGY/PRINCIPAL FINDINGS: Circulating A-FABP level was determined by ELISA in 341 Chinese subjects (221 men, 120 women) who underwent coronary angiography. A-FABP levels in patients with CAD were significantly higher compared with non-CAD subjects (P = 0.029 in men; P = 0.031 in women). Serum A-FABP increased significantly in multi-vessel diseased patients than in non-CAD subjects (P = 0.011 in men, P = 0.004 in women), and showed an independent correlation with coronary atherosclerosis index (standardized β = 0.173, P = 0.025). In multiple logistic regression analysis, serum A-FABP was an independent risk factor for CAD in women (OR = 5.637, 95%CI: 1.299-24.457, P = 0.021). In addition, amino terminal pro-brain natriuretic peptide (NT-proBNP) was demonstrated to be positively and independently correlated with A-FABP (standardized β = 0.135, P = 0.027). CONCLUSIONS/SIGNIFICANCE: Serum A-FABP is closely associated with the presence and severity of CAD in Chinese women

Limb development genes underlie variation in human fingerprint patterns

Fingerprints are of long-standing practical and cultural interest, but little is known about the mechanisms that underlie their variation. Using genome-wide scans in Han Chinese cohorts, we identified 18 loci associated with fingerprint type across the digits, including a genetic basis for the long-recognized “pattern-block” correlations among the middle three digits. In particular, we identified a variant near EVI1 that alters regulatory activity and established a role for EVI1 in dermatoglyph patterning in mice. Dynamic EVI1 expression during human development supports its role in shaping the limbs and digits, rather than influencing skin patterning directly. Trans-ethnic meta-analysis identified 43 fingerprint-associated loci, with nearby genes being strongly enriched for general limb development pathways. We also found that fingerprint patterns were genetically correlated with hand proportions. Taken together, these findings support the key role of limb development genes in influencing the outcome of fingerprint patterning

A global reference for human genetic variation

The 1000 Genomes Project set out to provide a comprehensive description of common human genetic variation by applying whole-genome sequencing to a diverse set of individuals from multiple populations. Here we report completion of the project, having reconstructed the genomes of 2,504 individuals from 26 populations using a combination of low-coverage whole-genome sequencing, deep exome sequencing, and dense microarray genotyping. We characterized a broad spectrum of genetic variation, in total over 88 million variants (84.7 million single nucleotide polymorphisms (SNPs), 3.6 million short insertions/deletions (indels), and 60,000 structural variants), all phased onto high-quality haplotypes. This resource includes >99% of SNP variants with a frequency of >1% for a variety of ancestries. We describe the distribution of genetic variation across the global sample, and discuss the implications for common disease studies

Solvation Effects on the Thermal Helix Inversion of Molecular Motors from QM/MM Calculations

Molecular motors convert light and thermal energies into mechanical work, offering good opportunities to design novel molecular devices. Among them, molecular motors alternate a photoisomerization and a thermal helix inversion to achieve unidirectional rotation. The rotational speed is limited by the helix inversion step, which in turn is governed by a barrier in the electronic ground state. In this work, we systematically study the solvation effect on the thermal process of selected molecular motors, comparing reaction barriers obtained from both density functional theory (DFT) in the isolated system and umbrella sampling within a hybrid quantum mechanics/molecular mechanics (QM/MM) model in solution. We find more prominent solvation effects on those molecular motors with larger dipole moments. The results could provide insight into how to functionalize molecular motors to speed up their rotation

Solvation Effects on the Thermal Helix Inversion of Molecular Motors from QM/MM Calculations

Molecular motors convert light and thermal energies into mechanical work, offering good opportunities to design novel molecular devices. Among them, molecular motors alternate a photoisomerization and a thermal helix inversion to achieve unidirectional rotation. The rotational speed is limited by the helix inversion step, which in turn is governed by a barrier in the electronic ground state. In this work, we systematically study the solvation effect on the thermal process of selected molecular motors, comparing reaction barriers obtained from both density functional theory (DFT) in the isolated system and umbrella sampling within a hybrid quantum mechanics/molecular mechanics (QM/MM) model in solution. We find more prominent solvation effects on those molecular motors with larger dipole moments. The results could provide insight into how to functionalize molecular motors to speed up their rotation

On the depth of the tangent cone and the growth of the Hilbert function

For a d-dimensional Cohen-Macaulay local ring (R,m) we study the depth of the associated graded ring of R with respect to an m-primary ideal I in terms of the Vallabrega-Valla conditions and the length of It+1/JIt, where J is a J minimal reduction of I and t≥ 1. As a corollary we generalize Sally's conjecture on the depth of the associated graded ring with respect to a maximal ideal to m-primary ideals. We also study the growth of the Hilbert function