Effects of transgenic Cry1Ac + CpTI cotton on non-target mealybug pest Ferrisia virgata and its predator Cryptolaemus montrouzieri

Recently, several invasive mealybugs (Hemiptera: Pseudococcidae) have rapidly spread to Asia and have become a serious threat to the production of cotton including transgenic cotton. Thus far, studies have mainly focused on the effects of mealybugs on non-transgenic cotton, without fully considering their effects on transgenic cotton and trophic interactions. Therefore, investigating the potential effects of mealybugs on transgenic cotton and their key natural enemies is vitally important. A first study on the effects of transgenic cotton on a non-target mealybug, Ferrisia virgata (Cockerell) (Hemiptera: Pseudococcidae) was performed by comparing its development, survival and body weight on transgenic cotton leaves expressing Cry1Ac (Bt toxin) + CpTI (Cowpea Trypsin Inhibitor) with those on its near-isogenic non-transgenic line. Furthermore, the development, survival, body weight, fecundity, adult longevity and feeding preference of the mealybug predator Cryptolaemus montrouzieri Mulsant (Coleoptera: Coccinellidae) was assessed when fed F. virgata maintained on transgenic cotton. In order to investigate potential transfer of Cry1Ac and CpTI proteins via the food chain, protein levels in cotton leaves, mealybugs and ladybirds were quantified. Experimental results showed that F. virgata could infest this bivalent transgenic cotton. No significant differences were observed in the physiological parameters of the predator C. montrouzieri offered F. virgata reared on transgenic cotton or its near-isogenic line. Cry1Ac and CpTI proteins were detected in transgenic cotton leaves, but no detectable levels of both proteins were present in the mealybug or its predator when reared on transgenic cotton leaves. Our bioassays indicated that transgenic cotton poses a negligible risk to the predatory coccinellid C. montrouzieri via its prey, the mealybug F.virgata

Auricle shaping using 3D printing and autologous diced cartilage.

ObjectiveTo reconstruct the auricle using a porous, hollow, three-dimensional (3D)-printed mold and autologous diced cartilage mixed with platelet-rich plasma (PRP).MethodsMaterialise Magics v20.03 was used to design a 3D, porous, hollow auricle mold. Ten molds were printed by selective laser sintering with polyamide. Cartilage grafts were harvested from one ear of a New Zealand rabbit, and PRP was prepared using 10 mL of auricular blood from the same animal. Ear cartilage was diced into 0.5- to 2.0-mm pieces, weighed, mixed with PRP, and then placed inside the hollow mold. Composite grafts were then implanted into the backs of respective rabbits (n = 10) for 4 months. The shape and composition of the diced cartilage were assessed histologically, and biomechanical testing was used to determine stiffness.ResultsThe 3D-printed auricle molds were 0.6-mm thick and showed connectivity between the internal and external surfaces, with round pores of 0.1 to 0.3 cm. After 4 months, the diced cartilage pieces had fused into an auricular shape with high fidelity to the anthropotomy. The weight of the diced cartilage was 5.157 ± 0.230 g (P > 0.05, compared with preoperative). Histological staining showed high chondrocyte viability and the production of collagen II, glycosaminoglycans, and other cartilaginous matrix components. In unrestricted compression tests, auricle stiffness was 0.158 ± 0.187 N/mm, similar to that in humans.ConclusionAuricle grafts were constructed successfully through packing a 3D-printed, porous, hollow auricle mold with diced cartilage mixed with PRP. The auricle cartilage contained viable chondrocytes, appropriate extracellular matrix components, and good mechanical properties.Levels of evidenceNA. Laryngoscope, 129:2467-2474, 2019

Larval nutrition-induced plasticity affects reproduction and gene expression of the ladybeetle, Cryptolaemus montrouzieri

Background: Organisms may develop into multiple phenotypes under different nutritional environments by developmental plasticity, whereas the potential costs and mechanisms of such plasticity are poorly understood. Here we examined the fitness and gene expression of nutrition-induced phenotypes in the ladybeetle, Cryptolaemus montrouzieri after having experienced varying larval food regimes. Results: We found that C. montrouzieri adults undergoing a variable larval food regime achieved a similar developmental time, survival, body mass and egg production as those undergoing a high larval food regime. The survival, developmental time, body mass and fecundity of the adults from a restricted larval food regime were inferior to those from the high and variable larval food regimes. However, the adults from this restricted larval food regime had a higher expression level of genes encoding immune-and antioxidant-related enzymes than those from the high and variable larval food regimes when exposed to starvation and pesticide conditions in adult life. Conclusions: These results suggest that larval food availability in C. montrouzieri not only triggers adult phenotypic differences but also affects reproduction and expression level of genes in adult life, indicating that the larval nutritional conditions can affect adult fitness and resistance to stressful conditions through developmental plasticity

Nutrition-dependent phenotypes affect sexual selection in a ladybird

Environmental factors play a crucial role in influencing sexual selection in insects and the evolution of their mating systems. Although it has been reported that sexual selection in insects may change in response to varying environments, the reason for these changes remains poorly understood. Here, we focus on the mate selection process of a ladybird, Cryptolaemus montrouzieri, when experiencing low-and high-nutrition diet regimes both in its larval and adult stages. We found that female ladybirds preferred to mate with males reared under high-nutrition diet regimes, regardless of the nutritional conditions they experienced during their own larval stages, indicating that mate choice of female C. montrouzieri is non-random and phenotype-dependent. Such mate choice may depend on visual cues (body or genitalia size) and/or chemical cues (pheromones). Further, females from high-nutrition larval diet regimes produced more eggs than those from low-nutrition larval diet regimes. In addition, diet regimes during adulthood also exerted strong effects on egg production. In summary, our study provides new insight into the mate choice of C. montrouzieri as affected by seasonal changes in resources, and suggests that food availability may be a driving force in mate choice

The Entomopathogenic Fungus Metarhizium anisopliae Affects Feeding Preference of Sogatella furcifera and Its Potential Targets’ Identification

The rice planthopper Sogatella furcifera is a unique vector of the southern rice black-streaked dwarf virus (SRBSDV). The feeding behavior of S. furcifera should directly affect the diffusion of this virus. In this study, we noted that the infection of Metarhizium anisopliae CQMa421 on S. furcifera disturbed the feeding behavior of this pest to SRBSDV-infected rice, from preference to non-preference. Then, we further investigated the potential targets of M. anisopliae CQMa421 on the feeding behavior of S. furcifera after 0 h, 24 h and 48 h of infection by transcriptomic analysis via Illumina deep sequencing. A total of 93.27 GB of data was collected after sequencing, from which 91,125 unigenes were annotated, including 75 newly annotated genes. There were 1380 vs. 2187 and 137 vs. 106 upregulated and downregulated differentially expressed genes (DEGs) detected at 24 h and 48 h, respectively. The biological functions and associated metabolic processes of these genes were determined with the Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) databases. The results suggested that major of DEGs are involved in energy metabolism, biosynthesis, immune response, the FoxO signaling pathway, the MAPK signaling pathway and apoptosis in response to the fungal infection. Noteworthily, several olfactory-related genes, including odorant receptors and odorant binding proteins, were screened from these differentially expressed genes, which played critical roles in regulating the olfactory behavior of insects. Taken together, these results provide new insights for understanding the molecular mechanisms underlying fungus and host insect interaction, especially for olfactory behavior regulated by fungus

A new approach to prepare Polyethylene Glycol Allyl Glycidyl Ether

The polyethylene glycol allyl glycidyl ether (PGAGE) is an important intermediate for preparing silicone softener that can be synthesized from allyl alcohol polyoxyethylene ether and epichlorohydrin (ECH). The performance parameters including the concentration of ECH, initial boron trifluoride diethyl etherate (BFEE) as well as CaCl2 quality were investigated respectively. The optimum process parameters which can get high capping and low by-product rate are as follows: the ECH concentration is 2.0 M, the initial BFEE concentration is 1.65mM, and the CaCl2 dosage is 1.65g/L. Under these conditions, the maximal yield can be improved to 91.36%, the percent of capping rate is higher than 98.16%, the residual concentration of F-is only 0.63 mg/L

Effects of the Entomopathogenic Fungus Metarhizium anisopliae on the Mortality and Immune Response of Locusta migratoria

Entomopathogenic fungi are the key regulators of insect populations and some of them are important biological agents used in integrated pest management strategies. Compared with their ability to become resistant to insecticides, insect pests do not easily become resistant to the infection by entomopathogenic fungi. In this study, we evaluated the mortality and immune response of the serious crop pest Locusta migratoria manilensis after exposure to a new entomopathogenic fungus strain, Metarhizium anisopliae CQMa421. M. anisopliae CQMa421 could effectively infect and kill the L. migratoria adults and nymphs. The locust LT50 under 1 × 108 conidia/mL concentration of M. anisopliae was much lower than that under conidial concentration 1 × 105 conidia/mL (i.e., 6.0 vs. 11.2 and 5.0 vs. 13.8 for adults and nymphs, respectively). The LC50 (log10) of M. anisopliae against locust adults and nymphs after 10 days was 5.2 and 5.6, respectively. Although the number of hemocytes in L. migratoria after exposure to M. anisopliae did not differ with that in the controls, the enzymatic activity of superoxide dismutase (SOD) and prophenoloxidase (ProPO) did differ between the two treatments. The activities of both SOD and ProPO under the M. anisopliae treatment were lower than that in the controls, except for the ProPO activity at 72 h and the SOD activity at 96 h. Further, the expression of the L. migratoria immune-related genes defensin, spaetzle, and attacin differed after exposure to M. anisopliae for 24 h to 96 h. Taken together, this study indicated that infection with M. anisopliae CQMa421 could cause the death of L. migratoria by interacting with the immune responses of the host, demonstrating that this fungal strain of M. anisopliae can be an efficient biocontrol agent against L. migratoria

Dynamic Control of Multiple Optical Patterns of Cholesteric Liquid Crystal Microdroplets by Light-Driven Molecular Motors

The key to high-level encryption and anti-counterfeiting techniques is the storage of multiple levels of distinct information that can be individually and precisely addressed by certain stimuli. This continues to be a formidable challenge as the concealed images or codes must be read with fast response and high resolution without cross-talk to the first layer of information. Here, we report a non-fluorescence-based strategy to establish responsive encryption labels taking advantage of solely tuning multiple optical patterns of cholesteric liquid crystal (CLC) microdroplets doped with light-driven molecular motors. The photo-triggered unidirectional rotation of the motor induced not only changes in the helical twist power value but the opposite helical orientation of the superstructure in CLCs as well, resulting in changes in both the structural color and the selective reflection of circularly polar light. The designed labels, which featured highly selective addressability of dual-level distinct information, good reversibility, and viewing angle-independence, were applied to build devices for daily practical use, demonstrating great potential in anti-counterfeiting technology and provide a versatile platform for enhanced data protection and encryption of authentic information.</p