Development of a miniature Twin Rotary Compressor

In this paper, we will introduce the miniature compressor, which is designed for various applications. Twin rotary compressor structure was adopted to reduced in size and minimize vibration. The weight of the miniature rotary compressor is about 20% that of the reciprocating compressor which has equivalent cooling capacity. To minimize the noise and vibration, the muffler and the cylinder are optimized and torque control algorithm is used for the compressor controller. For a variety of applications, developed compressor is designed for both HBP and LBP condition. Considering the mass-productivity and reliability, IPM type motor is designed

Investigation of thermal resistance and power consumption in Ga-doped indium oxide (In2O3) nanowire phase change random access memory

The resistance stability and thermal resistance of phase change memory devices using similar to 40 nm diameter Ga-doped In2O3 nanowires (Ga:In2O3 NW) with different Ga-doping concentrations have been investigated. The estimated resistance stability (R(t)/R-0 ratio) improves with higher Ga concentration and is dependent on annealing temperature. The extracted thermal resistance (R-th) increases with higher Ga-concentration and thus the power consumption can be reduced by similar to 90% for the 11.5% Ga: In2O3 NW, compared to the 2.1% Ga: In2O3 NW. The excellent characteristics of Ga-doped In2O3 nanowire devices offer an avenue to develop low power and reliable phase change random access memory applications. (C) 2014 AIP Publishing LLC.X113sciescopu

Performance Improvement of a High Side Scroll Compressor by Thrust Surface Oil Groove

Performance analysis has been carried out on a high side scroll compressor having a fixed scroll equipped with a circular oil groove on its thrust surface. Oil is supplied to the oil groove through an intermittent opening from a high pressure oil reservoir formed inside the orbiting scroll hub. Oil in the groove is then delivered to both suction and back pressure chambers by pressure differentials and viscous pumping action of the orbiting scroll base plate. Mathematical modeling of this oil groove system has been incorporated into main compressor performance simulation program for optimum oil groove design. Pressure in the oil groove can be controlled by changing the oil passage area and oil groove configuration. With an enlarged oil passage, pressure in the oil groove increases due to increased flow rate, but pressure increase in the back pressure chamber is not that large, resulting in reduced friction loss at the thrust surface between the two scrolls. On the other hand, by increasing the oil passage area, oil content in the refrigerant flow increases, and the orbiting scroll stability could be negatively affected by oil groove pressure increase. Considering all these factors, EER could be improved by about 3.6% at ARI condition by optimum oil groove design

Fatigue Prediction of the Discharge Pipe in Reciprocating Compressor

In this paper, a fatigue prediction of the line discharge tube for reciprocating compressor being installed in a refrigerator was studied. The tube usually gets plenty of the repeated loads caused by the start and stop motion of a reciprocating compressor. There are two representative methods to predict the fatigue stress. At first the stress-life can be applied to the problem which takes a lot of repeated stress within the elastic strain range. Second is the strain-life method which can be used when it comes to the problem of a small repeated stress in the plastic strain range. This paper presents the stress-life method how the design parameters of a discharge pipe relate to the fatigue prediction and analyzes the co-relation between them

Analysis of Initial Baseline Clinical Parameters and Treatment Strategy Associated with Medication Failure in the Treatment of Benign Prostatic Hyperplasia in Korea

Purpose To analyze the baseline clinical factors and medication treatment strategy used in cases with medication treatment failure of benign prostatic hyperplasia (BPH). Methods From January 2006 to December 2009, 677 BPH patients with at least 3 months of treatment with medication were enrolled. We analyzed clinical factors by medication failure (n=161) versus maintenance (n=516), by prostate size (less than 30 g, n=231; 30 to 50 g, n=244; greater than 50 g, n=202), and by prostate-specific antigen (PSA) levels (less than 1.4 ng/mL, n=324; more than 1.4 ng/mL, n=353). Results Age, combination medication rate, PSA, and prostate volume were statistically different between the medication treatment failure and maintenance groups. By prostate size, the PSA and medication failure rates were relatively higher and the medication period was shorter in patients with a prostate size of more than 30 g. The combination medication rate was higher in patients with a prostate size of more than 50 g. The medication failure rate and prostate volume were higher in patients with a PSA level of more than 1.4 ng/mL. However, the combination treatment rate was not significantly different in patients with a PSA level lower than 1.4 ng/mL. Suggestive cutoffs for combination medication are a prostate volume of 34 g and PSA level of 1.9 ng/mL. Conclusions The clinical factors associated with medication failure were age, treatment type, and prostate volume. Combination therapy should be considered more in Korea in patients with a PSA level higher than 1.4 ng/mL and a prostate volume of between 30 and 50 g to prevent medication failure

Synergetic strengthening of layered steel sheet investigated using an in situ neutron diffraction tensile test

Synergetic strengthening induced by plastic strain incompatibility at the interface, and the resulting extra geometrically necessary dislocations (GNDs) generated during plastic deformation, were investigated to understand the origin of extra strength in heterogeneous structured (HS) materials. The mechanism of extra GND generation in twinning-induced plasticity (TWIP)-interstitial free (IF) steel layered sheet was quantitatively analyzed by conducting in situ neutron scattering tensile test. Load partitioning due to the different mechanical properties between the TWIP-steel core and IF-steel sheath at the TWIP/IF interface was observed during the in situ tensile testing. Because of the plastic strain incompatibility from load partitioning, extra GNDs are generated and saturate during tensile deformation. The extra GNDs can be correlated with the back-stress evolution of the HS materials, which contributes to the strength of layered materials. Because of the back-stress evolution caused by load partitioning, the strength of TWIP-IF layered steel is higher than the strength estimated by the rule-of-mixtures. This finding offers a mechanism by which extra GNDs are generated during load partitioning and shows how they contribute to the mechanical properties of HS materials.11Ysciescopu

Manumycin from a new Streptomyces strain shows antagonistic effect against methicillin-resistant Staphylococcus aureus (MRSA)/vancomycin-resistant enterococci (VRE) strains from Korean Hospitals

An antimicrobial compound, highly effective against multidrug-resistant (MDR) bacteria, purified from a Streptomyces strain was identified as manumycin. The minimal inhibitory concentrations (MICs) of manumycin against 8 different strains of methicillin-resistant Staphylococcus aureus (MRSA) were ranged 2 to 32 μg/ml. Similarly, MICs of manumycin against 4 vancomycin-resistant enterococci (VRE) strains were ranged 8 to 32 μg/ml while it remained ineffective against 4 other VRE strains. Compared to vancomycin, manumycin provided slightly weaker activity against MRSA strains but stronger activity against 4 VRE strains. This is the first report of antagonistic effect of manumycin against MDR pathogens.Keywords: Manumycin, methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE)African Journal of Biotechnology Vol. 12(17), pp. 2249-225

Klebsiella pneumoniae Orbital Cellulitis with Extensive Vascular Occlusions in a Patient with Type 2 Diabetes

A 39-year-old woman visited the emergency room complaining of right eye pain and swelling over the preceding three days. The ophthalmologist's examination revealed orbital cellulitis and diabetic retinopathy in the right eye, although the patient had no prior diagnosis of diabetes. It was therefore suspected that she had diabetes and orbital cellulitis, and she was started on multiple antibiotic therapies initially. She then underwent computed tomography scans of the orbit and neck and magnetic resonance imaging of the brain. These studies showed an aggravated orbital cellulitis with abscess formation, associated with venous thrombophlebitis, thrombosis of the internal carotid artery, and mucosal thickening of maxillary sinus with multiple paranasal abscesses. Three days later, initial blood culture grew Klebsiella pneumoniae. She recovered after incision and drainage and antibiotic therapy for 37 days