Anion-controlled foldamers

This tutorial review provides a summary of anion-mediated folding of linear and cyclic oligomers as well as anion-responsive behaviours of related polymeric architectures. Anions have emerged as a significant focus of the supramolecular community and here we review their impact on directing the secondary structures of synthetic oligomers and polymers while modulating physical properties e.g. molecular recognition. Oligomers and polymers responsive to anionic guests are typically constructed with hydrogen bond donors complementary to the target anions. Anion binding within the cavities leads to folding and helical wrapping of linear and cyclic oligomers as well as control over macromolecular properties of polymers. This review covers the impact of anion binding on guiding the secondary structures of single-stranded folded oligomers (foldamers) and cyclic oligomers (macrocycles), and on modulating the physical properties of select polymer architectures

Molecular recognition with synthetic receptors ; Development of new chiral auxillaries

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Chemistry, 1991.Includes bibliographical references.by Kyu-Sung Jeong.Ph.D

Electrochemical Investigation of High-Performance Dye-Sensitized Solar Cells Based on Molybdenum for Preparation of Counter Electrode

In order to improve the photocurrent conversion efficiency of dye-sensitized solar cells (DSSCs), we studied an alternative conductor for the counter electrode and focused on molybdenum (Mo) instead of conventional fluorine-doped tin oxide (FTO). Because Mo has a similar work function to FTO for band alignment, better formability of platinum (Pt), and a low electric resistance, using a counter electrode made of Mo instead of FTO lead to the enhancement of the catalytic reaction of the redox couple, reduce the interior resistance of the DSSCs, and prevent energy-barrier formation. Using electrical measurements under a 1-sun condition (100 mW/cm(2), AM 1.5), we determined that the fill factor (FF) and photocurrent conversion efficiency (eta) of DSSCs with a Mo electrode were respectively improved by 7.75% and 5.59% with respect to those of DSSCs with an FTO electrode. Moreover, we have investigated the origin of the improved performance through surface morphology analyses such as scanning electron microscopy and electrochemical analyses including cyclic voltammetry and impedance spectroscopy

Heterologous Expression of Plant Cell Wall Degrading Enzymes for Effective Production of Cellulosic Biofuels

A major technical challenge in the cost-effective production of cellulosic biofuel is the need to lower the cost of plant cell wall degrading enzymes (PCDE), which is required for the production of sugars from biomass. Several competitive, low-cost technologies have been developed to produce PCDE in different host organisms such as Escherichia coli, Zymomonas mobilis, and plant. Selection of an ideal host organism is very important, because each host organism has its own unique features. Synthetic biology-aided tools enable heterologous expression of PCDE in recombinant E. coli or Z. mobilis and allow successful consolidated bioprocessing (CBP) in these microorganisms. In-planta expression provides an opportunity to simplify the process of enzyme production and plant biomass processing and leads to self-deconstruction of plant cell walls. Although the future of currently available technologies is difficult to predict, a complete and viable platform will most likely be available through the integration of the existing approaches with the development of breakthrough technologies.open8

Bioinspired reversible hydrogel adhesives for wet and underwater surfaces

Stable and reversible adhesion to wet surfaces is challenging owing to water molecules at the contact interface. In this study, we develop a hydrogel-based wet adhesive, which can exhibit strong and reversible adhesion to wet and underwater surfaces as well as to dry surfaces. The remarkable wet adhesion of the hydrogel adhesive is realized based on a synergetic integration of bioinspired microarchitectures and water-friendly and water-absorbing properties of the polymeric hydrogel. Under dry conditions, the microstructured hydrogel adhesive exhibits strong van der Waals interaction-based adhesion, while under underwater conditions, it can maximize capillary adhesion. Consequently, the hydrogel adhesive exhibits remarkable adhesion strengths for dry, moist, and submerged substrates. Maximum normal and shear adhesion strengths of 423 and 384, 492 and 340, and 253 and 21 kPa are achieved with the hydrogel adhesive for dry, moist, and submerged substrates, respectively. Our results demonstrate that strong wet and underwater adhesion can be achieved only with the hydrogel-based adhesive with simple microscale architecture

Synthetic chloride transporters with the binding mode observed in a ClC chloride channel

A series of synthetic molecules bearing the same hydrogen bonding mode observed in StClC were prepared and their transport ability of chloride ion across a lipid membrane was systematically optimized.close4

Measurement of SUVs-Maximum for Normal Region Using VOI in PET/MRI and PET/CT

The purpose of this research is to establish an overall data set associated with the VOI (Volume of Interest), which is available for simultaneous assessment of PET/MRI and PET/CT regardless of the use of contrast media. The participants as objects of this investigation are 26 healthy examinees in Korea, SUV (standardized-uptake-value)s-maximum evaluation for whole-body F-18 FDG (fluorodeoxyglucose) PET/MRI image using VOI of normal region has exhibited very significant difference to that for whole-body F-18 FDG PET/CT image (significant probability value (P)<0.0001). However, there appeared high correlation between them in view of statistics (R-square (R)>0.8). It is shown that one needs to decide SUVs-maximum for PET/MRI with the reduction of 25.0~26.4% from their evaluated value and needs to decide with the reduction of 28.8~29.4% in the same situation but with the use of contrast media. The use of SUVLBM-maximum (SUVLean Body Mass-maximum) is very advantageous in reading overall image of PET/CT and PET/MRI to medical doctors and researchers, if we consider its convenience and efficiency. We expect that this research enhances the level of the early stage accurate diagnosis with whole-body images of PET/MRI and PET/CT

Comprehensive modeling of resistive switching in the Al/TiOx/TiO2/Al heterostructure based on space-charge-limited conduction

The reversible resistance switching (RS) effect of the Al/TiO x/TiO2/Al heterostructure is investigated in this study. This RS was attributed to space-charge-limited conduction (SCLC) as controlled by localized traps in the TiOx layer. The preexisting SCLC theory was extended to describe the abrupt resistance transition. An analytical model was developed with consideration of the ratio of free and trapped carrier density, which was extracted from the experimental data to show exponentially distributed traps in energy. The proposed model can be applicable to RS phenomena induced by interface-type traps in other material system.open231

Ultrasound of the Urinary Bladder, Revisited

Urine-filled bladder can be evaluated easily with ultrasound, and bladder tumors are usually well shown at ultrasound. Although ultrasound is not a primary imaging modality for staging of bladder tumors, it can provide general information regarding depth of tumor invasion into the proper muscle or perivesical adipose tissue. Ultrasound is also useful in showing nonneoplastic lesions of the bladder, such as stone, cystitis, diverticulum and ureterocele. Color Doppler ultrasound can show vascularity of the tumor. It also shows urine flow from the ureteral orifice or through the diverticular neck. As compared with transabdominal ultrasound, transrectal ultrasound shows bladder lesions more markedly in the dorsal wall or neck of the bladder