27 research outputs found

    Pcr Cloning of Chick Noggin

    No full text
    Noggin is a protein that is secreted from the Spemann organizer during embryological development. During normal development, Noggin functions to induce neural tissue and ventralize mesoderm and is required for proper development of the skeletal and central nervous system. These functions are brought about by the inhibition of dorsalizing agents, specifically, bone morphogenetic proteins (BMPs). Previous studies suggest that bone morphogenetic proteins control a variety of developmental processes, including axis formation, mesenchymal epithelial interactions, apoptosis consistent with pattern formation, and differentiation of mesenchymally derived structures. Studies have shown the expression pattern of BMP-2 and -4 by in situ hybridization to be localized in the developing heart, as well as a number of other sites suggesting that BMP-2 and BMP-4 function during cardiac development. In order to confirm or refute this hypothesized role for BMP, we have attempted to produce a recombinant form of the BMP-2 and BMP-4 inhibitor protein, noggin. Using this recombinant noggin, it will be possible to inhibit BMP function in developing chick embryos and examine potential cardiac defects

    Tissue Damage Disrupts Developmental Progression and Ecdysteroid Biosynthesis in <em>Drosophila</em>

    Get PDF
    <div><p>In humans, chronic inflammation, severe injury, infection and disease can result in changes in steroid hormone titers and delayed onset of puberty; however the pathway by which this occurs remains largely unknown. Similarly, in insects injury to specific tissues can result in a global developmental delay (e.g. prolonged larval/pupal stages) often associated with decreased levels of ecdysone – a steroid hormone that regulates developmental transitions in insects. We use <em>Drosophila melanogaster</em> as a model to examine the pathway by which tissue injury disrupts developmental progression. Imaginal disc damage inflicted early in larval development triggers developmental delays while the effects are minimized in older larvae. We find that the switch in injury response (e.g. delay/no delay) is coincident with the mid-3rd instar transition – a developmental time-point that is characterized by widespread changes in gene expression and marks the initial steps of metamorphosis. Finally, we show that developmental delays induced by tissue damage are associated with decreased expression of genes involved in ecdysteroid synthesis and signaling.</p> </div

    Switch in Injury Response Coincides with the Mid-third Instar Transition.

    No full text
    <p>Cell ablation was induced as described (<a href="http://www.plosone.org/article/info:doi/10.1371/journal.pone.0049105#pone-0049105-g001" target="_blank">Figure 1</a>) at various time points (arrows) during the third larval instar. Cell ablation resulted in delayed pupariation (Red Arrows), no effect on developmental timing (Green Arrows), or a mixed effect (Yellow Arrows) in which some animals delayed development and others developed at the same time as controls.</p

    Damage to Wing Imaginal Discs Delays Pupariation and Adult Eclosion.

    No full text
    <p>(A–F) Timing of pupariation and adult eclosion following induction of cell ablation in the wing disc at the indicated time. Fraction of larvae that had (A, C, E) pupariated or (B, D, F) eclosed as adults are plotted relative to time in hours AEL for Ablating (Red - <i>w*; rnGAL4, UAS-egr, tubGAL80<sup>ts</sup>/Sgs3GFP</i>) and Non-Ablating (Blue - <i>w*; TM6, Tb<sup>1</sup>, tubGAL80/Sgs3GFP</i>) larvae. n = 3 independent populations (30 larvae each) were assayed for each ablation time. (A–B) Timing of (A) pupariation and (B) adult eclosion for larvae heat-treated at 173 hours AEL. Mean pupariation times are 286 and 227 hours AEL for Ablating and Non-ablating larvae, respectively. Mean eclosion times are 504 and 440 hours AEL for Ablating and Non-ablating larvae, respectively. Similar results were obtained with larvae heat-treated at 150, 162, or 184 hours AEL (data not shown). (C–D) Timing of (C) pupariation and (D) adult eclosion for larvae heat-treated at 198 hours AEL. Mean pupariation times are 279 and 230 hours AEL for ablating and non-ablating larvae, respectively. Mean eclosion times are 488 and 409 hours AEL for ablating and non-ablating larvae, respectively. Similar results were obtained with larvae heat-treated at 190 hours AEL (data not shown). (E-F) Timing of (E) pupariation and (F) adult eclosion for larvae heat-treated at 223 hours AEL. Mean pupariation times are 263 and 265 hours AEL for ablating and non-ablating larvae, respectively. Mean eclosion times are 419 and 411 hours AEL for ablating and non-ablating larvae, respectively. Similar results were obtained with larvae heat-treated at 213 and 220 hours AEL (data not shown).</p

    Primers Used for qPCR.

    No full text
    <p>Primers Used for qPCR.</p

    Effects of Tissue Damage on Ecdysone Biosynthesis and Signaling.

    No full text
    <p>qRT-PCR analysis of transcript levels of (A) <i>ptth</i>, (B) genes required for ecdysone synthesis, (C) <i>shd</i>, (D) ecdysone inducible genes, (E) ecdysone receptor components and (F) <i>ecdysone oxidase</i>. Graphs show changes in transcript levels 24 hours after heat treatment (T<sub>3</sub>; <a href="http://www.plosone.org/article/info:doi/10.1371/journal.pone.0049105#pone-0049105-g002" target="_blank">Figure 2B</a>) compared to transcript levels immediately before heat treatment (T<sub>0</sub>; <a href="http://www.plosone.org/article/info:doi/10.1371/journal.pone.0049105#pone-0049105-g002" target="_blank">Figure 2B</a>). Ablating (Red - <i>w*/w<sup>1118</sup>; rnGAL4, UAS-egr, tubGAL80ts/+</i>). Non-Ablating (Blue - <i>w*/w<sup>1118</sup>; TM6, Tb<sup>1</sup>, tubGAL80/+</i>).</p

    Ecdysteroid Titers Following Wing Disc Cell Ablation.

    No full text
    <p>Ecdysteroid titers measured for larvae of Ablating (Red) and Non-Ablating (Blue) genotypes at time points T<sub>0</sub>–T<sub>3</sub> (See <a href="http://www.plosone.org/article/info:doi/10.1371/journal.pone.0049105#pone-0049105-g001" target="_blank">Figure 1B</a>), as determined by EIA. Values are expressed as the means of 20E equivalents per mg of tissue. Error bars indicate the SEM (n = 2 samples of 15 larvae each). Asterisks indicate differences statistically significant at p≤0.05 (t-test).</p

    Imaginal Disc Damage Delays the Mid-Third Instar Transition.

    No full text
    <p>(A–F) Timing of the mid-third instar transition (as measured by <i>Sgs3GFP</i> expression) in larvae that were heat-treated for 24 hours at 172 hours AEL to induce tissue damage in wing discs. (A–C) <i>Sgs3GFP</i> expression in Non-Ablating (<i>w*; TM6, Tb<sup>1</sup>, tubGAL80/Sgs3GFP</i>) larvae. (A) <i>Sgs3GFP</i> expression is absent in most larvae at 164 hours AEL, just before heat treatment (Sgs3GFP<sup>+</sup> = 3.6±4.7%; n = 28). <i>Sgs3GFP</i> is expressed at high levels after heat treatment in salivary glands at (B) 197 hours AEL (Sgs3GFP<sup>+</sup> = 77.3±0.6%; n = 22), at (C) 215 hours AEL (Sgs3GFP<sup>+</sup> = 91.7±7.9%; n = 12) and at 236 hours AEL (Sgs3GFP<sup>+</sup> = 100±0.0%; n = 19) – data not shown. (D–F) <i>Sgs3GFP</i> expression in Ablating (<i>w*; rnGAL4, UAS-egr, tubGAL80<sup>ts</sup>/Sgs3GFP</i>) larvae. (D) <i>Sgs3GFP</i> expression is absent in most larvae at 164 hours AEL, just before heat treatment (Sgs3GFP<sup>+</sup> = 2.6±3.1%; n = 38). (E) <i>Sgs3GFP</i> expression is detected at low levels at 197 hours AEL in only a small fraction of larvae examined (Sgs3GFP<sup>+</sup> = 10.0±13.3%; n = 30). (F) High levels of <i>Sgs3GFP</i> expression is visible at 215 hours AEL (Sgs3GFP<sup>+</sup> = 53.9±37.9%; n = 26) and at 236 hours AEL (Sgs3GFP<sup>+</sup> = 75.0±1.3%; n = 28) – data not shown.</p

    Cell Ablation Strategy.

    No full text
    <p>(A) Strategy used to produce Ablating and Non-Ablating larvae. <i>w*; P{Sgs3-GFP}3</i> females were crossed to <i>w*;+;rn-GAL4,UAS-egr,tubGAL80<sup>ts</sup>/TM6Tb, tubGAL80</i> males to give rise to the Ablating genotype (<i>w*;+;rn-GAL4,UAS-egr,tubGAL80<sup>ts</sup>/Sgs3GFP</i>) and the control Non-Ablating genotype (<i>w*;+;TM6Tb, tubGAL80/Sgs3GFP)</i>. (B) Strategy to induce cell ablation. Embryos of the Ablating and Non-Ablating genotypes were collected at room temperature in four hour intervals and transferred to 18°C. First-instar larvae (48 hours AEL) were transferred to a vial containing standard cornmeal-yeast-agar medium and were allowed to develop at 18°C until the designated time for ablation induction. At the designated time during L3 (130–230 hours AEL) vials were transferred to 30°C for 40 hours, returned to 18°C and monitored daily to document the time to <i>Sgs3GFP</i> expression, pupariation or eclosion. RNA for qPCR and samples for EIA experiments were collected at time points T<sub>0</sub>–T<sub>3</sub>.</p
    corecore