Comparative static curing versus dynamic curing on tablet coating structures

International audienceCuring is generally required to stabilize film coating from aqueous polymer dispersion. This post-coating drying step is traditionally carried out in static conditions, requiring the transfer of solid dosage forms to an oven. But, curing operation performed directly inside the coating equipment stands for an attractive industrial application. Recently, the use of various advanced physico-chemical characterization techniques i.e., X-ray micro-computed tomography, vibrational spectroscopies (near infrared and Raman) and X-ray microdiffraction, allowed new insights into the film-coating structures of dynamically cured tablets. Dynamic curing end-point was efficiently determined after 4 h. The aim of the present work was to elucidate the influence of curing conditions on film-coating structures. Results demonstrated that 24 h of static curing and 4 h of dynamic curing, both performed at 60 degrees C and ambient relative humidity, led to similar coating layers in terms of drug release properties, porosity, water content, structural rearrangement of polymer chains and crystalline distribution. Furthermore, X-ray microdiffraction measurements pointed out different crystalline coating compositions depending on sample storage time. An aging mechanism might have occur during storage, resulting in the crystallization and the upward migration of cetyl alcohol, coupled to the downward migration of crystalline sodium lauryl sulfate within the coating layer. Interestingly, this new study clearly provided further knowledge into film-coating structures after a curing step and confirmed that curing operation could be performed in dynamic conditions

Comprehensive study of dynamic curing effect on tablet coating structure

International audienceThe dissolution method is still widely used to determine curing end-points to ensure long-term stability of film coatings. Nevertheless, the process of curing has not yet been fully investigated. For the first time, joint techniques were used to elucidate the mechanisms of dynamic curing over time from ethylcellulose (Aquacoat (R))-based coated tablets. X-ray micro-computed tomography (X mu CT), Near Infrared (NIR), and Raman spectroscopies as well as X-ray microdiffraction were employed as non-destructive techniques to perform direct measurements on tablets. All techniques indicated that after a dynamic curing period of 4 h, reproducible drug release can be achieved and no changes in the microstructure of the coating were any longer detected. X mu CT analysis highlighted the reduced internal porosity, while both NIR and Raman measurements showed that spectral information remained unaltered after further curing. X-ray microdiffraction revealed densification of the coating layer with a decrease in the overall coating thickness of about 10 pm as a result of curing. In addition, coating heterogeneity attributed to cetyl alcohol was observed from microscopic images and Raman analysis. This observation was confirmed by X-ray microdiffraction that showed that crystalline cetyl alcohol melted and spread over the coating surface with curing. Prior to curing, X-ray microdiffraction also revealed the existence of two coating zones differing in crystalline cetyl alcohol and sodium lauryl sulfate concentrations which could be explained by migration of these constituents within the coating layer. Therefore, the use of non-destructive techniques allowed new insights into tablet coating structures and provided precise determination of the curing end-point compared to traditional dissolution testing. This thorough study may open up new possibilities for process and formulation control

An FPGA-based pipeline for micropolarizer array imaging

The enhancement of current camera performances, in terms of framerate, image resolution and pixel width, has direct consequences on the amount of resources needed to process video data. Stokes imaging permits to estimate polarization of light and create multiple polarization descriptors of the scene. Therefore, such video cameras need fast processing for critical applications like overseeing, defect detection or surface characterization. An FPGA hardware implementation of Stokes processing is presented here that embeds dedicated pipeline for micropolarizer array sensors. An optimized fixed-point pipeline is used to compute polarimetric images, i.e. Stokes vector, degree of polarization and angle of polarization. Simulation and experimental studies are done. The hardware design contains parallel processing, low latency and low power and could meet actual real-time and embeddable requirements for smart camera systems

VAST: An ASKAP Survey for Variables and Slow Transients

The Australian Square Kilometre Array Pathfinder (ASKAP) will give us an unprecedented opportunity to investigate the transient sky at radio wavelengths. In this paper we present VAST, an ASKAP survey for Variables and Slow Transients. VAST will exploit the wide-field survey capabilities of ASKAP to enable the discovery and investigation of variable and transient phenomena from the local to the cosmological, including flare stars, intermittent pulsars, X-ray binaries, magnetars, extreme scattering events, interstellar scintillation, radio supernovae and orphan afterglows of gamma ray bursts. In addition, it will allow us to probe unexplored regions of parameter space where new classes of transient sources may be detected. In this paper we review the known radio transient and variable populations and the current results from blind radio surveys. We outline a comprehensive program based on a multi-tiered survey strategy to characterise the radio transient sky through detection and monitoring of transient and variable sources on the ASKAP imaging timescales of five seconds and greater. We also present an analysis of the expected source populations that we will be able to detect with VAST.Comment: 29 pages, 8 figures. Submitted for publication in Pub. Astron. Soc. Australi

Place de la colectomie segmentaire dans la maladie de Crohn

PARIS6-Bibl.Pitié-Salpêtrie (751132101) / SudocPARIS-BIUM (751062103) / SudocSudocFranceF

Real-time predictions of drug release and end point detection of a coating operation by in-line near infrared measurements

International audienc