Properties and Biocompatibility of Chitosan and Silk Fibroin Blend Films for Application in Skin Tissue Engineering

Chitosan/silk fibroin (CS/SF) blend films were prepared and evaluated for feasibility of using the films as biomaterial for skin tissue engineering application. Fourier transform infrared spectroscopy and differential scanning calorimetry analysis indicated chemical interaction between chitosan and fibroin. Chitosan enhanced β-sheet conformation of fibroin and resulted in shifting of thermal degradation of the films. Flexibility, swelling index, and enzyme degradation were also increased by the chitosan content of the blend films. Biocompatibility of the blend films was determined by cultivation with fibroblast cells. All films showed no cytotoxicity by XTT assay. Fibroblast cells spread on CS/SF films via dendritic extensions, and cell-cell interactions were noted. Cell proliferation on CS/SF films was also demonstrated, and their phenotype was examined by the expression of collagen type I gene. These results showed possibility of using the CS/SF films as a supporting material for further study on skin tissue engineering

Characterization and Performance Analysis of Hydrolyzed versus Non-Hydrolyzed Poly(NVF-co-HEA) Hydrogels for Cosmetic Applications

This study explores the synthesis and modification of poly(N-vinylformamide-co-N-hydroxyethyl acrylamide) (poly(NVF-co-HEA)) hydrogels for cosmetic applications. Poly(NVF-co-HEA) hydrogels were produced followed by an acid hydrolysis reaction to produce poly(NVF-co-VAm-co-HEA) hydrogels, introducing poly(vinyl amine) (PVAm) into the structure. This modification considerably alters the hydrogels’ properties, yielding materials with over 96% water content, predominantly in the form of non-freezing or free water, which is beneficial in the uptake and release of hydrophilic species. The primary amine groups from inclusion of VAm also improved the mechanical properties, as evidenced by an 8-fold increase in Young’s modulus. The hydrogels also possessed pH-responsive behavior, which was particularly noticeable under acidic and basic conditions, where a large decrease in water content was observed (40% to 75% reduction). Characterizing the hydrogels’ release capabilities involved using organic dyes of different functional groups and sizes to examine the pH impact on release. The results indicated that hydrolyzed hydrogels interacted more effectively with charged species, highlighting their suitability for pH-responsive delivery. The release of cosmetic active ingredients was also demonstrated through the controlled release of Liquid Azelaic™, specifically potassium azeloyl diglycinate (PAD). Our findings reveal that the hydrolyzed hydrogels exhibit superior burst release, especially under alkaline conditions, suggesting their suitability for cosmetic applications where controlled, pH-responsive delivery of active ingredients is desired. Overall, this investigation highlights the potential of hydrolyzed poly(NVF-co-HEA) hydrogels in cosmetic applications. Their ability to combine high water content with mechanical integrity, along with their pH-responsive release ability, allows for use in cosmetic formulations

Anti-Aging Properties of <i>Cannabis sativa</i> Leaf Extract against UVA Irradiation

Hemp extract has garnered interest as a potential cosmeceutical agent with multifunctional activities, particularly in protecting against UV-induced skin cell aberrations and restoring aged skin cells. The ethanolic extract of Cannabis sativa leaves was prepared into an aqueous solution (CLES) to investigate its anti-photoaging ability. HPLC analysis revealed that the CLES contained 1.64 ± 0.01% w/w of cannabidiol and 0.11% w/w of ∆9-tetrahydrocannabinol. Additionally, the total phenolic content was found to be 4.08 ± 0.30 mg gallic acid equivalent per g of solution using the Folin–Ciocalteu method. The CLES exhibited potent scavenging activity using a DPPH assay, with an EC50 value of 277.9 ± 2.41 μg/mL, comparable to L-ascorbic acid, with 2.19 ± 0.28 μg/mL. The anti-photoaging potential of the CLES was evaluated using UVA-irradiated and in vitro-aged fibroblasts as a model. Pre-treatment with 20 μg/mL CLES for 24 h significantly alleviated the reduction in type I procollagen and suppressed the overproduction of MMP-1 and IL-6 induced by UVA. Moreover, the percentage of senescence-associated β-galactosidase-expressing cells decreased significantly to 11.9 ± 0.5% in the aged cells treated with CLES compared with untreated cells (18.8 ± 3.8%). These results strongly indicate the cosmeceutical potential of the CLES as an effective active agent for the anti-photoaging prevention and/or treatment

Development of Natural Active Agent-Containing Porous Hydrogel Sheets with High Water Content for Wound Dressings

This work was concerned with the fabrication of a porous hydrogel system suitable for medium to heavy-exudating wounds where traditional hydrogels cannot be used. The hydrogels were based on 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPs). In order to produce the porous structure, additional components were added (acid, blowing agent, foam stabilizer). Manuka honey (MH) was also incorporated at concentrations of 1 and 10% w/w. The hydrogel samples were characterized for morphology via scanning electron microscopy, mechanical rheology, swelling using a gravimetric method, surface absorption, and cell cytotoxicity. The results confirmed the formation of porous hydrogels (PH) with pore sizes ranging from ~50–110 µm. The swelling performance showed that the non-porous hydrogel (NPH) swelled to ~2000%, while PH weight increased ~5000%. Additionally, the use of a surface absorption technique showed that the PH absorbed 10 μL in <3000 ms, and NPH absorbed <1 μL over the same time. Incorporating MH the enhanced gel appearance and mechanical properties, including smaller pores and linear swelling. In summary, the PH produced in this study had excellent swelling performance with rapid absorption of surface liquid. Therefore, these materials have the potential to expand the applicability of hydrogels to a range of wound types, as they can both donate and absorb fluid

Water-soluble macromers based on 2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt (Na-AMPS) for rapid in situ hydrogel film formation

The in situ formation of hydrogels has potential for a number of biomedical applications but their generation via conventional polymerization techniques has a number of limitations, such as toxicity and reaction time. The use of macromers in hydrogel formulations can help overcome these limitations. In this work, we synthesized a new functionalized macromer formed via the copolymerization of 2-acrylamido-2-methylpropane sulfonic acid sodium salt (AMPS) and acid-functional monomers that can undergo a ring-opening reaction with allyl glycidyl ether (AGE) to generate the desired pendant vinyl macromer functionality. These macromers were characterized by 1H nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy and gel permeation chromatography (GPC) to provide evidence for successful macromer synthesis and subsequent polymerization. Using a UV-initiated crosslinking approach with poly(ethylene glycol) diacrylate (PEGDA), the hydrogels were fabricated from the macromer solution, with the gelation time being reduced from 1200 s to 10 s when compared to hydrogel formation from regular vinyl monomers. While different acidic monomers result in distinct tensile properties, hydrogels containing 2-carboxyethyl acrylate (CEA) exhibit low strength but high elongation. In contrast, those with methacrylic acid (MAA) demonstrate higher strength and lower elongation. Therefore, using a balanced combination of each is a logical approach for achieving a robust final hydrogel film. In summary, we have produced a new macromer possessing characteristics highly conducive to rapid hydrogel synthesis. This macromer approach holds potential for use in in situ hydrogel formation, where a viscous solution can be applied to the target area and subsequently hardened to its hydrogel. We envisage its application primarily in the biomedical field

Hydroquinine Inhibits the Growth of Multidrug-Resistant <i>Pseudomonas aeruginosa</i> via the Suppression of the Arginine Deiminase Pathway Genes

Hydroquinine has antimicrobial potential with demonstrated activity against several bacteria, including multidrug-resistant (MDR) P. aeruginosa reference strains. Despite this, there is limited evidence confirming the antibacterial activity of hydroquinine against clinical isolates and the underlying mechanism of action. Here, we aimed to investigate the antibacterial effect of hydroquinine in clinical P. aeruginosa strains using phenotypic antimicrobial susceptibility testing and synergistic testing. In addition, we examined the potential inhibitory mechanisms against MDR P. aeruginosa isolates using informatic-driven molecular docking analysis in combination with RT-qPCR. We uncovered that hydroquinine inhibits and kills clinical P. aeruginosa at 2.50 mg/mL (MIC) and 5.00 mg/mL (MBC), respectively. Hydroquinine also showed partial synergistic effects with ceftazidime against clinical MDR P. aeruginosa strains. Using SwissDock, we identified potential interactions between arginine deiminase (ADI)-pathway-related proteins and hydroquinine. Furthermore, using RT-qPCR, we found that hydroquinine directly affects the mRNA expression of arc operon. We demonstrated that the ADI-related genes, including the arginine/ornithine antiporter (arcD) and the three enzymes (arginine deiminase (arcA), ornithine transcarbamylase (arcB), and carbamate kinase (arcC)), were significantly downregulated at a half MIC of hydroquinine. This study is the first report that the ADI-related proteins are potential molecular targets for the inhibitory effect of hydroquinine against clinically isolated MDR P. aeruginosa strains

<i>Curcuma aromatica</i> and <i>Curcuma comosa</i> Extracts and Isolated Constituents Provide Protection against UVB-Induced Damage and Attenuate Matrix Metalloproteinase-1 Expression in HaCaT Cells

Ultraviolet-B (UVB) exposure is one of the primary extrinsic factors causing skin photoaging. It stimulates inflammatory responses and arrests the cell cycle. Matrix metalloproteinase-1 (MMP-1) secreted by keratinocytes is one of the important extracellular matrixes to attenuate UVB-induced skin aging via collagen degradation. Curcuma aromatica (CA) and Curcuma comosa (CC), the herbaceous plants in the Zingiberaceae family, are commonly used in Thai traditional women’s medicines. The present work was aimed to investigate the potential of the CA and CC extracts and their isolated compounds to attenuate UVB-induced MMP-1 and cell cycle arrest in HaCaT keratinocytes. Total phenolic contents and antioxidant capacities of the extracts were determined. CC extract contains more phenolic components and provides more potent antioxidant activities than CA extract. HaCaTs were pretreated with the extracts or their isolated constituents 1–4 for 24 h and then repeatedly exposed to UVB at 100 mJ/cm2 10 times. Both extracts and compounds 1–4 effectively reduce UVB-induced MMP-1 levels in HaCaT cells and restore cell cycle arrest. This is the first report on the potential of CA and CC extracts in reducing UVB-induced MMP-1 expression and regulating cell proliferation in HaCaT cells. Thus, CA and CC extracts might be used as alternative natural agents to prevent UVB-induced skin photoaging

In Situ Compatibilized Blends of PLA/PCL/CAB Melt-Blown Films with High Elongation: Investigation of Miscibility, Morphology, Crystallinity and Modelling

Ternary-blended, melt-blown films of polylactide (PLA), polycaprolactone (PCL) and cellulose acetate butyrate (CAB) were prepared from preliminary miscibility data using a rapid screening method and optical ternary phase diagram (presented as clear, translucent, and opaque regions) as a guide for the composition selection. The compositions that provided optically clear regions were selected for melt blending. The ternary (PLA/PCL/CAB) blends were first melt-extruded and then melt-blown to form films and characterized for their tensile properties, tensile fractured-surface morphology, miscibility, crystallinity, molecular weight and chemical structure. The results showed that the tensile elongation at the break (%elongation) of the ternary-blended, melt-blown films (85/5/10, 75/10/15, 60/15/25 of PLA/PCL/CAB) was substantially higher (>350%) than pure PLA (ca. 20%). The range of compositions in which a significant increase in %elongation was observed at 55–85% w/w PLA, 5–20% w/w PCL and 10–25% w/w CAB. Films with high %elongation all showed good interfacial interactions between the dispersed phase (PCL and CAB) and matrix (PLA) in FE-SEM and showed improvements in miscibility (higher intermolecular interaction and mixing) and a decrease in the glass transition temperature, when compared to the low %elongation films. The decrease in Mw and Mn and the formation of the new NMR peaks (1H NMR at 3.68–3.73 ppm and 13C NMR at 58.54 ppm) were observed in only the high %elongation films. These are expected to be in situ compatibilizers that are generated during the melt processing, mostly by chain scission. In addition, mathematical modelling was used to study the optimal ratio and cost-effectiveness of blends with optimised mechanical properties. These ternary-blended, melt-blown films have the potential for use in both packaging and medical devices with excellent mechanical performance as well as inherent economic and environmental capabilities