Lattice Knots in a Slab

In this paper the number and lengths of minimal length lattice knots confined to slabs of width $L$, is determined. Our data on minimal length verify the results by Sharein et.al. (2011) for the similar problem, expect in a single case, where an improvement is found. From our data we construct two models of grafted knotted ring polymers squeezed between hard walls, or by an external force. In each model, we determine the entropic forces arising when the lattice polygon is squeezed by externally applied forces. The profile of forces and compressibility of several knot types are presented and compared, and in addition, the total work done on the lattice knots when it is squeezed to a minimal state is determined

Minimal knotted polygons in cubic lattices

An implementation of BFACF-style algorithms on knotted polygons in the simple cubic, face centered cubic and body centered cubic lattice is used to estimate the statistics and writhe of minimal length knotted polygons in each of the lattices. Data are collected and analysed on minimal length knotted polygons, their entropy, and their lattice curvature and writhe

The Compressibility of Minimal Lattice Knots

The (isothermic) compressibility of lattice knots can be examined as a model of the effects of topology and geometry on the compressibility of ring polymers. In this paper, the compressibility of minimal length lattice knots in the simple cubic, face centered cubic and body centered cubic lattices are determined. Our results show that the compressibility is generally not monotonic, but in some cases increases with pressure. Differences of the compressibility for different knot types show that topology is a factor determining the compressibility of a lattice knot, and differences between the three lattices show that compressibility is also a function of geometry.Comment: Submitted to J. Stat. Mec

Partially directed paths in a wedge

The enumeration of lattice paths in wedges poses unique mathematical challenges. These models are not translationally invariant, and the absence of this symmetry complicates both the derivation of a functional recurrence for the generating function, and solving for it. In this paper we consider a model of partially directed walks from the origin in the square lattice confined to both a symmetric wedge defined by $Y = \pm pX$, and an asymmetric wedge defined by the lines $Y= pX$ and Y=0, where $p > 0$ is an integer. We prove that the growth constant for all these models is equal to $1+\sqrt{2}$, independent of the angle of the wedge. We derive functional recursions for both models, and obtain explicit expressions for the generating functions when $p=1$. From these we find asymptotic formulas for the number of partially directed paths of length $n$ in a wedge when $p=1$. The functional recurrences are solved by a variation of the kernel method, which we call the ``iterated kernel method''. This method appears to be similar to the obstinate kernel method used by Bousquet-Melou. This method requires us to consider iterated compositions of the roots of the kernel. These compositions turn out to be surprisingly tractable, and we are able to find simple explicit expressions for them. However, in spite of this, the generating functions turn out to be similar in form to Jacobi $\theta$-functions, and have natural boundaries on the unit circle.Comment: 26 pages, 5 figures. Submitted to JCT

Blended teaching and learning: Exploring the concept, barriers to implementation and designing of learning resources

With the advent of the coronavirus disease 2019 (COVID-19), several institutions worldwide have adopted the blended mode of teaching and learning. However, literature on this concept in South Africa and on the African continent is scarce. This scoping review explores the concept of blended approach to training and how to design resources for the blended teaching and learning approach. In addition, the review investigates barriers to the implementation of blended learning. The findings of this study demonstrate that the understanding of the concept of blended teaching and learning is not homogenous and is often left to individual academics to decide on the approach. The review identified several hurdles that need to be addressed for successful implementation of blended teaching and learning, however these are not specific to South African institutions. Available literature on studies done elsewhere and in South African, suggest that some of the identified barriers to adoption of blended teaching and learning are real, while others are perceived or imagined. Lastly, the authors observed that there are several approaches to designing learning resources for the blended mode of teaching and learning. The choice of approach is dependent on the intended purpose for which the specific design is adopted. There is a need for studies that specifically investigate blended learning in Universities in South Africa and on the continent to help identify barriers to adopting blended teaching and learning among institutions that are specific to the South African and African context. Institutions adopting the blended teaching and learning mode of delivery, need to be unambiguous in their philosophy of blending teaching and learning and not leave it to the implementing academics. Policymakers can use the information generated in this review to recommend minimum requirements for a blended delivery mode in public institutions of higher learning

Resources and infrastructure for the delivery of antiretroviral therapy at primary health

There are concerns as to whether South Africa\'s public health system has sufficient resources, human and otherwise, to ensure universal access to antiretroviral treatment (ART). We report on public sector implementation of the Comprehensive Care Management and Treatment (CCMT) programme in the Free State Province, South Africa, in particular whether the primary health care (PHC) infrastructure was able to mobilise the necessary inputs to effectively provide ART, without undermining other services within facilities. A longitudinal study was conducted of the first 16 PHC facilities accredited to provide ART in the province. The facilities were visited on three occasions over 2 years, involving both structured and open-ended interviews with professional and lay staff, and observations of available resources. The resources assessed were staffing, space, essential equipment, drug supplies and laboratory systems. Approximately one-fifth (20%) of professional nurses were allocated to the CCMT programme in the facilities, although the overall number of professional nurses increased by only 14%. This process resulted in some displacement of professional nurses towards the CCMT Programme away from other services in the facilities. However, this could have been partially compensated for by task shifting towards community health workers and the appointment of additional support staff. Staff were largely positive about the programme. Drug supplies, availability of equipment and laboratory systems, although good at the baseline, improved further over the period of observation. The lack of adequate space to accommodate the new programme was a frequently reported problem. Overall, our assessment is that the PHC infrastructure in the Free State\'s public health system is capable of implementing and benefiting from the CCMT programme. Nevertheless, constraints in the availability of professional staff threaten future implementation of both the CCMT and other PHC programmes. Keywords: Resources, infrastructure, antiretroviral therapy, primary health care facilities.SAHARA-J Vol. 5 (3) 2008: pp.106-11

Fresh look at randomly branched polymers

We develop a new, dynamical field theory of isotropic randomly branched polymers, and we use this model in conjunction with the renormalization group (RG) to study several prominent problems in the physics of these polymers. Our model provides an alternative vantage point to understand the swollen phase via dimensional reduction. We reveal a hidden Becchi-Rouet-Stora (BRS) symmetry of the model that describes the collapse ($\theta$-)transition to compact polymer-conformations, and calculate the critical exponents to 2-loop order. It turns out that the long-standing 1-loop results for these exponents are not entirely correct. A runaway of the RG flow indicates that the so-called $\theta^\prime$-transition could be a fluctuation induced first order transition.Comment: 4 page

Confinement of knotted polymers in a slit

We investigate the effect of knot type on the properties of a ring polymer confined to a slit. For relatively wide slits, the more complex the knot, the more the force exerted by the polymer on the walls is decreased compared to an unknotted polymer of the same length. For more narrow slits the opposite is true. The crossover between these two regimes is, to first order, at smaller slit width for more complex knots. However, knot topology can affect these trends in subtle ways. Besides the force exerted by the polymers, we also study other quantities such as the monomer-density distribution across the slit and the anisotropic radius of gyration.Comment: 9 pages, 6 figures, submitted for publicatio

Collapsing lattice animals and lattice trees in two dimensions

We present high statistics simulations of weighted lattice bond animals and lattice trees on the square lattice, with fugacities for each non-bonded contact and for each bond between two neighbouring monomers. The simulations are performed using a newly developed sequential sampling method with resampling, very similar to the pruned-enriched Rosenbluth method (PERM) used for linear chain polymers. We determine with high precision the line of second order transitions from an extended to a collapsed phase in the resulting 2-dimensional phase diagram. This line includes critical bond percolation as a multicritical point, and we verify that this point divides the line into two different universality classes. One of them corresponds to the collapse driven by contacts and includes the collapse of (weakly embeddable) trees, but the other is {\it not yet} bond driven and does not contain the Derrida-Herrmann model as special point. Instead it ends at a multicritical point $P^*$ where a transition line between two collapsed phases (one bond-driven and the other contact-driven) sparks off. The Derrida-Herrmann model is representative for the bond driven collapse, which then forms the fourth universality class on the transition line (collapsing trees, critical percolation, intermediate regime, and Derrida-Herrmann). We obtain very precise estimates for all critical exponents for collapsing trees. It is already harder to estimate the critical exponents for the intermediate regime. Finally, it is very difficult to obtain with our method good estimates of the critical parameters of the Derrida-Herrmann universality class. As regards the bond-driven to contact-driven transition in the collapsed phase, we have some evidence for its existence and rough location, but no precise estimates of critical exponents.Comment: 11 pages, 16 figures, 1 tabl

Punctured polygons and polyominoes on the square lattice

We use the finite lattice method to count the number of punctured staircase and self-avoiding polygons with up to three holes on the square lattice. New or radically extended series have been derived for both the perimeter and area generating functions. We show that the critical point is unchanged by a finite number of punctures, and that the critical exponent increases by a fixed amount for each puncture. The increase is 1.5 per puncture when enumerating by perimeter and 1.0 when enumerating by area. A refined estimate of the connective constant for polygons by area is given. A similar set of results is obtained for finitely punctured polyominoes. The exponent increase is proved to be 1.0 per puncture for polyominoes.Comment: 36 pages, 11 figure