Development of porous ceramics by lycopodium using uniaxial pressing and sintering

In this work microporous hydroxyapatite (HAp) ceramics were fabricated using lycopodium as a porosifier. The samples were produced by uniaxial pressing and then heating at high temperatures, 1100°C and 1200°C, to burn-out porogens and sintering. The obtained samples had porosity over the variable range of 12 to 45% with different pore size ranging from 0.2 to 25 µm. Chemical and physical characterization was determined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and bending strength measurements. The bending strength of the prepared samples was in the range of 1.97–21.81 MPa

The role of Strontium enriched hydroxyapatite and tricalcium phosphate biomaterials in osteoporotic bone regeneration

Publisher Copyright: © 2019 by the authors.Background: Strontium (Sr) enriched biomaterials have been used to improve bone regeneration in vivo. However, most studies provide only two experimental groups. The aim of our study was to compare eleven different bone sample groups from osteoporotic and healthy rabbits' femoral neck, as it is the most frequent osteoporotic fracture in humans. Methods: Osteoporotic bone defects were filled with hydroxyapatite 30% (HA) and tricalcium phosphate 70% (TCP), 5% Sr-enriched HA 30 /TCP 70 , HA 70 /TCP 30 , or Sr-HA 70 /TCP 30 granules and were compared with intact leg, sham surgery and healthy non-operated bone. Expression of osteoprotegerin (OPG), nuclear factor kappa beta 105 (NFkB-105), osteocalcin (OC), bone morphogenetic protein 2/4 (BMP-2/4), collagen I (Col-1α), matrix metalloproteinase 2 (MMP- 2), tissue inhibitor of matrix metalloproteinase 2 (TIMP-2), interleukin 1 (IL-1) and interleukin 10 (IL-10) was analyzed by histomorphometry and immunohistochemistry. Results: Our study showed that Sr-HA 70 /TCP 30 induced higher expression of all above-mentioned factors compared to intact leg and even higher expression of OC, MMP-2 and NFkB-105 compared to Sr-HA 30 /TCP 70 . HA 70 /TCP 30 induced higher level of NFkB-105 and IL-1 compared to HA 30 /TCP 70 . Conclusion: Sr-enriched biomaterials improved bone regeneration at molecular level in severe osteoporosis and induced activity of the factors was higher than after pure ceramic, sham or even healthy rabbits.publishersversionPeer reviewe

Aqueous synthesis of Z-scheme photocatalyst powders and thin-film photoanodes from earth abundant elements

Riga Technical University supported the preparation of this manuscript from the Scientific Research Project Competition for Young Researchers No. ZP 2017/8Solid-state narrow band gap semiconductor heterostructures with a Z-scheme charge-transfer mechanism are the most promising photocatalytic systems for water splitting and environmental remediation under visible light. Herein, we construct all-solid Z-scheme photocatalytic systems from earth abundant elements (Ca and Fe) using an aqueous synthesis procedure. A novel Z-scheme two-component Fe2O3/Ca2Fe2O5 heterostructure is obtained in a straightforward manner by soaking various iron-containing nanoparticles (amorphous and crystalline) with Ca(NO3)2 and performing short (20min) thermal treatments at 820°C. The obtained powder materials show high photocatalytic performances for methylene blue dye degradation under visible light (45 mW/cm2), exhibiting a rate constant up to 0.015min-1. The heterostructure exhibits a five-fold higher activity compared to that of pristine hematite. The experiments show that amorphous iron-containing substrate nanoparticles trigger the Fe2O3/Ca2Fe2O5 heterostructure formation. We extended our study to produce Fe2O3/Ca2Fe2O5 nanoheterostructure photoanodes via the electrochemical deposition of amorphous iron-containing sediment were used. The visible-light (15mW/cm2) photocurrent increases from 183μA/cm2 to 306μA/cm2 after coupling hematite and Ca2Fe2O5. Notably, the powders and photoanodes exhibit distinct charge-transfer mechanisms evidenced by the different stabilities of the heterostructures under different working conditions.Riga Technical University No. ZP 2017/8; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART

Bone Loss around Dental Implants 5 Years after Implantation of Biphasic Calcium Phosphate (HAp/βTCP) Granules

Funding Information: +e study was supported by National Research Programme No. 2014.10-4/VPP-3/21 “Multifunctional Materials and Composites, Photonics and Nanotechnology (IMIS2)” Project No. 4 “Nanomaterials and Nanotechnologies for Medical Applications.” Publisher Copyright: © 2018 Vadims Klimecs et al.Biphasic calcium phosphate ceramic granules (0.5-1.0 mm) with a hydroxyapatite and β-tricalcium phosphate ratio of 90/10 were used. Biphasic calcium phosphate ceramic granules produced in the Riga Technical University, Riga Rudolph Cimdins Biomaterials Innovation and Development Centre, were used for filling the bone loss on 18 patients with peri-implantitis. After 5 years at the minimum, clinical and 3D cone-beam computed tomography control was done. Clinical situation confirmed good stability of implants without any signs of inflammation around. Radiodensity of the previous gap and alveolar bone horizontally from middle point of dental implants showed similar radiodensity as in normal alveolar bone.publishersversionPeer reviewe

Cell-Laden 3D Printed GelMA/HAp and THA Hydrogel Bioinks: Development of Osteochondral Tissue-like Bioinks

Osteochondral (OC) disorders such as osteoarthritis (OA) damage joint cartilage and subchondral bone tissue. To understand the disease, facilitate drug screening, and advance therapeutic development, in vitro models of OC tissue are essential. This study aims to create a bioprinted OC miniature construct that replicates the cartilage and bone compartments. For this purpose, two hydrogels were selected: one composed of gelatin methacrylate (GelMA) blended with nanosized hydroxyapatite (nHAp) and the other consisting of tyramine-modified hyaluronic acid (THA) to mimic bone and cartilage tissue, respectively. We characterized these hydrogels using rheological testing and assessed their cytotoxicity with live-dead assays. Subsequently, human osteoblasts (hOBs) were encapsulated in GelMA-nHAp, while micropellet chondrocytes were incorporated into THA hydrogels for bioprinting the osteochondral construct. After one week of culture, successful OC tissue generation was confirmed through RT-PCR and histology. Notably, GelMA/nHAp hydrogels exhibited a significantly higher storage modulus (G') compared to GelMA alone. Rheological temperature sweeps and printing tests determined an optimal printing temperature of 20 °C, which remained unaffected by the addition of nHAp. Cell encapsulation did not alter the storage modulus, as demonstrated by amplitude sweep tests, in either GelMA/nHAp or THA hydrogels. Cell viability assays using Ca-AM and EthD-1 staining revealed high cell viability in both GelMA/nHAp and THA hydrogels. Furthermore, RT-PCR and histological analysis confirmed the maintenance of osteogenic and chondrogenic properties in GelMA/nHAp and THA hydrogels, respectively. In conclusion, we have developed GelMA-nHAp and THA hydrogels to simulate bone and cartilage components, optimized 3D printing parameters, and ensured cell viability for bioprinting OC constructs

Amorphous Calcium Phosphate and Amorphous Calcium Phosphate Carboxylate: Synthesis and Characterization

The authors acknowledge financial support from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 857287 and Baltic Research Programme Project No. EEA-RESEARCH-85 “Waste-to-resource: eggshells as a source for next generation biomaterials for bone regeneration (EGGSHELL)” under the EEA Grant of Iceland, Liechtenstein and Norway No. EEZ/BPP/VIAA/2021/1. Institute of Solid State Physics, University of Latvia, received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART. 2Amorphous calcium phosphate (ACP) is the first solid phase precipitated from a supersaturated calcium phosphate solution. Naturally, ACP is formed during the initial stages of biomineralization and stabilized by an organic compound. Carboxylic groups containing organic compounds are known to regulate the nucleation and crystallization of hydroxyapatite. Therefore, from a biomimetic point of view, the synthesis of carboxylate ions containing ACP (ACPC) is valuable. Usually, ACP is synthesized with fewer steps than ACPC. The precipitation reaction of ACP is rapid and influenced by pH, temperature, precursor concentration, stirring conditions, and reaction time. Due to phosphates triprotic nature, controlling pH in a multistep approach becomes tedious. Here, we developed a new ACP and ACPC synthesis approach and thoroughly characterized the obtained materials. Results from vibration spectroscopy, nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), true density, specific surface area, and ion release studies have shown a difference in the physiochemical properties of the ACP and ACPC. Additionally, the effect of a carboxylic ion type on the physiochemical properties of ACPC was characterized. All of the ACPs and ACPCs were synthesized in sterile conditions, and in vitro analysis was performed using MC-3T3E1 cells, revealing the cytocompatibility of the synthesized ACPs and ACPCs, of which the ACPC synthesized with citrate showed the highest cell viability. © 2023 The Authors. Published by American Chemical Society --//-- https://pubs.acs.org/doi/10.1021/acsomega.3c00796. Published under the CC BY 4.0 licence.EEA Grant of Iceland EEZ/BPP/VIAA/2021/1; Horizon 2020 Framework Programme 857287, EEA-RESEARCH-85; institute of Solid State Physics, University of Latvia, received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART.

Radiological evaluation of endodontic treatment of chronic apical periodontitis using biphasic calcium phosphate biomaterial

Publisher Copyright: © 2018 by the authors; licensee Modestum Ltd., UK.The article is dedicated to the study of the efficacy of the periapical therapy of chronic periodontitis with the use of synthetic calcium-phosphate biomaterial. 30 patients aged from 22 to 56 years participated in a clinical study. Radiological evaluation was performed by radiovisiography and radiodensitometry. Follow-up examination was carried out at 3, 6 and 12 months. Densitometry indicators at the destruction site showed an increase in radiodensity from 74.2 ± 9.9 units (58.2%) to 111.9 ± 10.6 units (87.8%) after 12 months. Anterior group of teeth demonstrated statistically significant high rate of lesion compaction compared to posterior teeth.publishersversionPeer reviewe

Incorporation of Barium Ions into Biomaterials: Dangerous Liaison or Potential Revolution?

In the present manuscript, a brief overview on barium, its possible utilization, and the aftermath of its behavior in organisms has been presented. As a bivalent cation, barium has the potential to be used in a myriad of biochemical reactions. A number of studies have exhibited both the unwanted outcome barium displayed and the advantages of barium laden compounds, tested in in vitro and in vivo settings. The plethora of prospective manipulations covered the area of hydrogels and calcium phosphates, with an end goal of examining barium’s future in the tissue engineering. However, majority of data revert to the research conducted in the 20th century, without investigating the mechanisms of action using current state-of-the-art technology. Having this in mind, set of questions that are needed for possible future research arose. Can barium be used as a substitute for other biologically relevant divalent cations? Will the incorporation of barium ions hamper the execution of the essential processes in the organism? Most importantly, can the benefits outweigh the harm

Fusion and classification algorithm of octacalcium phosphate production based on XRD and FTIR data

The present manuscript tested an automated analysis sequence to provide a decision support system to track the OCP synthesis from -TCP over time. Initially, the XRD and FTIR signals from a hundredfold scaled-up hydrolysis of OCP from -TCP were fused and modeled by the curve fitting based on the significantly established maxima from the literature and nine features extracted from the fitted shapes. Afterward, the analysis sequence enclosed the machine learning techniques for feature ranking, spatial filtering, and dimensionality reduction to support the automatic recognition of the synthesis stages. The proposed analysis pipeline for OCP identification might be the foundation for a decision support system explicitly targeting OCP synthesis. Future projects will exploit the suggested methodology for pinpointing the OCP production over time (including the intermediary phases present in the OCP formation) and for evaluating whether biological variables might be merged with biomaterial properties to build a unified model of tissue response to the implant

Amorphous calcium phosphate materials

Amorphous calcium phosphate (ACP) is essential in formation of mineralized bone and using as a bone substitute. This study presents new aspects of carbonated ACP crystallization during heat treatment. Initially synthesis end pH and drying method (80 °C or freeze-drying) of ACP were varied. Thermal behaviour and structure of differently obtained ACP were evaluated using DSC-TGA, heating microscopy, XRD, FT-IR. In addition, degree of crystallinity (DOC), phase composition and chemical group information were compared for as-synthesized and heat-treated (crystallization end T and 1200 °C) ACP. For the first time DSC-TGA and heating microscopy methods were correlated. DOC of samples dried at 80 °C was synthesis end pH dependent. Heat treatment without temperature hold at crystallization end T produced materials with DOC of 82–91%, thus proving efficiency of low temperature processing. Variations in drying method and synthesis end pH affect structure of the samples heat treated at crystallization end T, but not at 1200 °C.Peer reviewe