Advanced neutron irradiation system using Texas A&M University Nuclear Science Center Reactor

A heavily filtered fast neutron irradiation system (FNIS) was developed for a variety of applications, including the study of long-term health effects of fast neutrons by evaluating the biological mechanisms of damage in cultured cells and living animals such as rats or mice. This irradiation system includes an exposure cave made with a lead-bismuth alloy, a cave positioning system, a gamma and neutron monitoring system, a sample transfer system, and interchangeable filters. This system was installed in the irradiation cell of the Texas A&M University Nuclear Science Center Reactor (NSCR). By increasing the thickness of the lead-bismuth alloy, the neutron spectra were shifted into lower energies by the scattering interactions of fast neutrons with the alloy. It is possible, therefore, by changing the alloy thickness, to produce distinctly different dose weighted neutron spectra inside the exposure cave of the FNIS. The calculated neutron spectra showed close agreement with the results of activation foil measurements, unfolded by SAND-II close to the cell window. However, there was a considerable less agreement for locations far away from the cell window. Even though the magnitude of values such as neutron flux and tissue kerma rates in air differed, the weighted average neutron energies showed close agreement between the MCNP and SAND-II since the normalized neutron spectra were in a good agreement each other. A paired ion chamber system was constructed, one with a tissue equivalent plastic (A-150) and propane gas for total dose monitoring, and another with graphite and argon for photon dose monitoring. Using the pair of detectors, the neutron to gamma ratio can be inferred. With the 20 cm-thick FNIS, the absorbed dose rates of neutrons measured with the paired ion chamber method and calculated with the SAND-II results were 13.7 ?? 0.02 Gy/min and 15.5 Gy/min, respectively. The absorbed dose rate of photons and the gamma contribution to total dose were 6.7??10-1 ?? 1.3??10-1 Gy/min and 4.7%, respectively. However, the estimated gamma contribution to total dose varied between 3.6 % to 6.6 % as the assumed neutron sensitivity to the graphite detector was changed from 0.01 to 0.03

Purification and characterization of microbial protease produced extracellularly from Bacillus subtilis FBL-1

An ammonium sulfate precipitation of fermentation broth produced by Bacillus subtilis FBL-1 resulted in 2.9-fold increase of specific protease activity. An eluted protein fraction from the column chromatographies using DEAE-Cellulose and Sephadex G-75 had 94.2- and 94.9-fold higher specific protease activity, respectively. An SDS-PAGE revealed a band of purified protease at approximately 37.6 kDa. Although purified protease showed the highest activity at 45°C and pH 9.0, the activity remained stable in temperature range from 30 to 50°C and pH range from 7.0 to 9.0. Protease activity was activated by metal ions such as Ca2+, Mg2+, Mn2+, Fe2+, Ca2+ and K+, but 10 mM Fe3+ significantly inhibited enzyme activity (53%). Protease activity was inhibited by 2 mM EDTA as a metalloprotease inhibitor, but it showed good stability against surfactants and organic solvents. The preferred substrates for protease activity were found to be casein (100%) and soybean flour (71.6%)

Photo-patternable and transparent films using cellulose nanofibers for stretchable origami electronics

Substantial progress in flexible or stretchable electronics over the past decade has extensively impacted various technologies such as wearable devices, displays and automotive electronics for smart cars. An important challenge is the reliability of these deformable devices under thermal stress. Different coefficients of thermal expansion (CTE) between plastic substrates and the device components, which include multiple inorganic layers of metals or ceramics, induce thermal stress in the devices during fabrication processes or long-term operations with repetitions of thermal cyclic loading-unloading, leading to device failure and reliability degradation. Here, we report an unconventional approach to form photo-patternable, transparent cellulose nanofiber (CNF) hybrid films as flexible and stretchable substrates to improve device reliability using simultaneous electrospinning and spraying. The electrospun polymeric backbones and sprayed CNF fillers enable the resulting hybrid structure to be photolithographically patternable as a negative photoresist and thermally and mechanically stable, presenting outstanding optical transparency and low CTE. We also formed stretchable origami substrates using the CNF hybrid that are composed of rigid support fixtures and elastomeric joints, exploiting the photo-patternability. A demonstration of transparent organic light-emitting diodes and touchscreen panels on the hybrid film suggests its potential for use in next-generation electronics.ope

Necrotizing fasciitis involving the chest and abdominal wall caused by Raoultella planticola

<p>Abstract</p> <p>Background</p> <p><it>Raoultella planticola </it>was originally considered to be a member of environmental <it>Klebsiella</it>. The clinical significance of <it>R. planticola </it>is still not well known.</p> <p>Case presentation</p> <p>We describe the first case of necrotizing fasciitis involving the chest and abdominal wall caused by <it>R. planticola</it>. The identity of the organism was confirmed using 16S rRNA sequencing. The patient was successfully treated with the appropriate antibiotics combined with operative drainage and debridement.</p> <p>Conclusions</p> <p><it>R. planticola </it>had been described as environmental species, but should be suspected in extensive necrotizing fasciitis after minor trauma in mild to moderate immunocompromised patients.</p

Donor-Site Morbidity Following Minimally Invasive Costal Cartilage Harvest Technique

ObjectivesAutologous costal cartilage is a promising alternative for mastoid obliteration. However, donor-site morbidities of the chest wall limit the use of this graft. To address this issue, we have developed a minimally-invasive technique of harvesting costal cartilage and report donor site morbidity associated with the procedure.MethodsDonor site morbidities were evaluated for 151 patients who underwent costal cartilage harvest, canal wall down mastoidectomy, and mastoid obliteration. Pain and cosmetic concern were evaluated via visual analogue scale (VAS). Scars were evaluated via the modified Vancouver Scar Scale (VSS) and the Patient and Observer Scar Assessment Scale (POSAS). Postoperative complications were assessed during the follow-up period.ResultsThe mean duration of noticeable pain was 5.3 days post operation. The mean VAS score for pain was 3.0 of 10 on the first day after the operation and gradually declined. At the 6 months post operation, the mean VAS cosmetic score at the costal cartilage harvest site was 0.6 of 10. The mean VSS score was 9.5 out of 10 total, and the mean POSAS score was 23.27 out of 110 total.ConclusionThe minimally-invasive chopped costal cartilage harvest technique resulted in acceptable pain, cosmetic concern, and postoperative complications for most patients. There were no major postoperative complications. Costal cartilage is an acceptable donor for mastoid obliteration in canal wall down mastoidectomy, especially in the context of the extremely low donor site morbidity of the minimally-invasive technique presented in the study

Optical and microstructural studies of atomically flat ultrathin In-rich InGaN/GaN multiple quantum wells

Optical and microstructural properties of atomically flat ultrathin In-rich (UTIR) InGaN/GaN multiple quantum well were investigated by means of photoluminescence (PL), time-resolved PL (TRPL), and cathodoluminescence (CL) experiments. The sample exhibits efficient trapping of the photoexcited carriers into quantum wells (QWs) and the effect of internal electric field in the QWs was found negligible by excitation power-dependent PL and TRPL. These phenomena were attributed to the nature of UTIR InGaN QWs, indicating the potential of this system for application in optoelectronic devices. Variation of TRPL lifetime across the PL band and spatially resolved monochromatic CL mapping images strongly suggest that there is micrometer-scale inhomogeneity in effective band gap in UTIR InGaN/GaN QWs, which is originated from two types of localized areas.open141

JAZF1 heterozygous knockout mice show altered adipose development and metabolism

Background: Juxtaposed with another zinc finger protein 1 (JAZF1) is associated with metabolic disorders, including type 2 diabetes mellitus (T2DM). Several studies showed that JAZF1 and body fat mass are closely related. We attempted to elucidate the JAZF1 functions on adipose development and related metabolism using in vitro and in vivo models. Results: The JAZF1 expression was precisely regulated during adipocyte differentiation of 3T3-L1 preadipocyte and mouse embryonic fibroblasts (MEFs). Homozygous JAZF1 deletion (JAZF1-KO) resulted in impaired adipocyte differentiation in MEF. The JAZF1 role in adipocyte differentiation was demonstrated by the regulation of PPARγ—a key regulator of adipocyte differentiation. Heterozygous JAZF1 deletion (JAZF1-Het) mice fed a normal diet (ND) or a high-fat diet (HFD) had less adipose tissue mass and impaired glucose homeostasis than the control (JAZF1-Cont) mice. However, other metabolic organs, such as brown adipose tissue and liver, were negligible effect on JAZF1 deficiency. Conclusion: Our findings emphasized the JAZF1 role in adipocyte differentiation and related metabolism through the heterozygous knockout mice. This study provides new insights into the JAZF1 function in adipose development and metabolism, informing strategies for treating obesity and related metabolic disorders. © 2021, The Author(s).1

Long-Term Survival in a Patient With Ruptured Hepatocellular Carcinoma

A 57-yr-old woman previously diagnosed with chronic hepatitis B was admitted via the emergency room because she suddenly developed epigastric pain with abdominal distension. On computed tomography (CT), a round enhancing mass was found on the left hepatic lobe with ascites in the peritoneal space. Bloody ascites were found upon tapping the ascites, and this led to the diagnosis of ruptured hepatocellular carcinoma (HCC). The patient was immediately treated with transcatheter arterial chemoembolization (TACE) including 50 mg of adriamycin and 10 mL of lipiodol, and then we performed left lateral segmentectomy 20 days later. To prevent recurrence of HCC by any micrometastasis, the patient subsequently received 8 cycles of adjuvant systemic chemotherapy (a regimen of epirubicin (50 mg/m2), cisplatin (60 mg/m2) and 5-fluorouracil (200 mg/m2)) at monthly intervals. After this, the patient has been regularly followed up and she shows no signs of tumor recurrence 7 years later. This case suggests that surgical resection and subsequent adjuvant systemic chemotherapy with using an ECF regimen may provide long-term survival for patients ruptured HCC