Electrolyte Effects on Spinel Dissolution and Cathodic Capacity Losses in 4 V U/LiJvIn2O4 Rechargeable Cells

Spinel dissolution and cathodic capacity losses in 4 V Li/LiMn204 secondary cells were examined in various electrolyte solutions comprising different solvents and Li salts. It was found that spinel dissolution is induced by acids that are generated as a result of electrochemical oxidation of solvent molecules on composite cathodes. Among various organic solvents, ethers such as tetrahydrofuran and dimethoxyethane were readily oxidized to produce acids whereas carbonates (ethylene carbonate, propylene carbonate, diethylcarbonate) were relatively inert. Consequently, when a spinelloaded composite cathode was charge/discharge cycled in the potential range of 3.6 to 4.3 V (vs. Li/Li), both the acid concentration and the extent of spinel dissolution was much higher in the ether-containing electrolytes as compared to the carbonates. The results, obtained from the chemical analysis on acid-attacked spinel powders and from the open-circuit potential measurement of composite cathodes, indicated that Li and Mn ion extraction is dominant in the earlier stage of acid attack. As the spinel dissolution further continues, however, oxygen losses from the lattice become more important. The combined feature of solvent oxidation and spinel dissolution was also affected by the nature of lithium salts added. Generally, the solvent-derived acid generation was not significant in those electrolytes containing fluorinated salts (LiPF5, LiBF4, and LiA5F6), yet the spinel dissolution in these electrolytes was still appreciable because acids were generated via another pathway; a reaction between the F-containing anions and impurity water.This work has been supported by the Korean Science and Engineering Foundation through the Research Center for Thin Film Fabrication and Crystal Growing of Advanced Materials in Seoul National Universit

Dissolution of Spinel Oxides and Capacity Losses in 4 V Li/LixMn2O4 Cells

Dissolution of spinel manganese oxides and the concomitant cathodic capacity losses were examined in 4 V Li/PC + DME + LiClO4/LiMn2O4 cells where PC is propylene carbonate and DME is dimethoxyethane. Dissolved Mn2 contents in the electrolytes were analyzed as a function of cathode potential and carbon contents in the composite cathodes. Characteristically, manganese dissolution was notably high at the charged state (at >4.1 V vs. Li/Lit), in which potential range an electrochemical oxidation of the solvent molecules was also prominent. From this and another observation whereby the Mn dissolution increased with increasing carbon content in the composite cathodes, it was proposed that, at the charged state of the cathode the solvent molecules are electrochemically oxidized on carbon surfaces and an as-generated species promotes the manganese dissolution. Results of an ac impedance study revealed that Mn dissolution brings about an increase in contact resistances at the Mn-depleted spinel/carbon interface, and also in the electrode reaction resistances for Li intercalation/deintercalation. Thus, the Mn dissolution causes capacity losses in two different pathways; material loss of the loaded spinel and polarization loss due to a cell resistance increment. The former prevailed when cathodes contained excess amounts of carbon, while the latter became more of a problem as the carbon contents decreased

Calorimetric Evidence for Nodes in the Overdoped Ba(Fe0.9_{0.9}Co0.1_{0.1})2_{2}As2_{2}

We present low-temperature specific heat of the electron-doped Ba(Fe$_{0.9}$Co$_{0.1}$)$_{2}$As$_{2}$, which does not show any indication of an upturn down to 400 mK, the lowest measuring temperature. The lack of a Schottky-like feature at low temperatures or in magnetic fields up to 9 Tesla enables us to identify enhanced low-temperature quasiparticle excitations and to study anisotropy in the linear term of the specific heat. Our results can not be explained by a single or multiple isotropic superconducting gap, but are consistent with multi-gap superconductivity with nodes on at least one Fermi surface sheet.Comment: 5 pages 4 figure

Small anisotropy of the lower critical field and s±s_\pm-wave two-gap feature in single crystal LiFeAs

The in- and out-of-plane lower critical fields and magnetic penetration depths for LiFeAs were examined. The anisotropy ratio $\gamma_{H_{c1}}(0)$ is smaller than the expected theoretical value, and increased slightly with increasing temperature from 0.6$T_c$ to $T_c$. This small degree of anisotropy was numerically confirmed by considering electron correlation effect. The temperature dependence of the penetration depths followed a power law($\sim$$T^n$) below 0.3$T_c$, with $n$$>$3.5 for both $\lambda_{ab}$ and $\lambda_c$. Based on theoretical studies of iron-based superconductors, these results suggest that the superconductivity of LiFeAs can be represented by an extended $s_\pm$-wave due to weak impurity scattering effect. And the magnitudes of the two gaps were also evaluted by fitting the superfluid density for both the in- and out-of-plane to the two-gap model. The estimated values for the two gaps are consistent with the results of angle resolved photoemission spectroscopy and specific heat experiments.Comment: 10 pages, 5 figure

PECTINASE-MODIFIED RED GINSENG (GS-E3D) INHIBIT NF-ΚB TRANSLOCATION AND NITRIC OXIDE PRODUCTION IN LIPOPOLYSACCHARIDE-STIMULATED RAW 264.7 CELLS

Objective: Red ginseng has been used as traditional medicines and functional foods in the world, because of its health benefits. The aim of this study was to elucidate the anti-inflammatory effect and mechanism of pectinase-modified red ginseng (GS-E3D) with a cellular model of lipopolysaccharide (LPS)-stimulated RAW264.7 cells.Methods: To study the anti-inflammatory effect of GS-E3D, the key inflammation mediators such as nitric oxide (NO),prostaglandin E2 (PGE2), inducible nitric oxide synthase (iNOS), Cyclooxygenase-2 (COX-2), tumor necrosis factor (TNF-α), and interleukin (IL)-6 production as well as on nuclear factor kappa B (NF-κB) and mitogen-activated protein kinases (MAPKs) activation, were measured by using the enzyme linked immunosorbent assay (ELISA)and Western blotting.Results: GS-E3D potently inhibited TNF-α and IL-6 and also diminished NO over-production, which was accompanied by the down-regulation of iNOS expression. GS-E3D effectively suppressed LPS-induced NF-κB activation through inhibiting the hyper-phosphorylation and degradation of IκB-α and phosphorylation of p38, ERK1/2 and JNK in MAPK signaling pathway.Conclusion: GS-E3D has a potential to be as an anti-inflammatory agent for functional food or cosmetic materials targeting on the NF-κB p65 and MAPKs signaling pathways.Â

Surface alignment, anchoring transitions, optical properties, and topological defects in the thermotropic nematic phase of organo-siloxane tetrapodes

We address the status of oxadiazole mesogens, C7 and C12, reported to show the biaxial nematic phase, by exploring material aspects (chemical stability, surface anchoring, optical and dielectric properties, topological defects) linked to the type of nematic order. We demonstrate that the isogyres splitting in conoscopic patterns of homeotropic state depends on sample thickness and is associated with variations of molecular tilt along the normal to substrates. We observe isolated topological point defects (boojums and hedgehogs), as well as nonsingular “escaped” disclinations pertinent only to the uniaxial nematic order. Our conclusion is that C7 and C12 feature only a uniaxial nematic phase and the apparent biaxiality is caused by surface effects

Highly Tunable Aptasensing Microarrays with Graphene Oxide Multilayers

A highly tunable layer-by-layer (LbL)-assembled graphene oxide (GO) array has been devised for high-throughput multiplex protein sensing. In this array, the fluorescence of different target-bound aptamers labeled with dye is efficiently quenched by GO through fluorescence resonance energy transfer (FRET), and simultaneous multiplex target detection is performed by recovering the quenched fluorescence caused by specific binding between an aptamer and a protein. Thin GO films consisting of 10 bilayers displayed a high quenching ability, yielding over 85% fluorescence quenching with the addition of a 2 mu M dye-labeled aptamer. The limit for human thrombin detection in the 6- and 10-bilayered GO array is estimated to be 0.1 and 0.001 nM, respectively, indicating highly tunable nature of LbL assembled GO multilayers in controlling the sensitivity of graphene-based FRET aptasensor. Furthermore, the GO chip could be reused up to four times simply by cleaning it with distilled water.open4

Observation of the DsJ(2317) and DsJ(2457) in B decays

We report the first observation of the B --> Dbar DsJ(2317) and B --> Dbar DsJ(2457) decays based on 123.8 10^6 BBar events collected with the Belle detector at KEKB. We observe the DsJ(2317) decay to Ds pi0 and DsJ(2457) decay to the Ds* pi0 and Ds gamma final states. We also set 90% CL upper limits for the decays DsJ(2317) --> Ds* gamma, DsJ(2457) --> Ds* gamma, DsJ(2457) --> Ds pi0 and DsJ(2457) --> Ds pi+ pi-.Comment: 6 pages, 3 figures. A few minor corrections. Replaced by version accepted to publication in Phys. Rev. Let