Effect of halide-mixing on tolerance factor and charge-carrier dynamics in (CH3NH3PbBr3-xClx) perovskites powders

The authors are highly thankful for the financial support of Higher Education Commission (HEC) Pakistan through the equipment/research grants (6976/Federal/NRPU/R&D/HEC/2017), (20-3071/NRPU/R&D/HEC/13). Author ZS acknowledges HEC for indigenous PhD Fellowship Phase-II, Batch-II, 2013, PIN 213-66018-2PS2-127 and International Research Support Initiative Programme (IRSIP). Author LKJ acknowledges support from a Marie Skłodowska-Curie Individual Fellowship (European Commission) (MCIF: No. 745776).This work demonstrates a route to making mixed halide perovskite powders at room temperature by the anti-solvent-assisted crystallization method. Although, mixed halide CH3NH3PbBr3−xClx perovskites have been prepared by different methods, however, to the best of our knowledge the anti-solvent-assisted crystallization method is employed here for the first time to prepare mixed halide CH3NH3PbBr3−xClx perovskite powders. Solution-processed methyl ammonium lead tribromide CH3NH3PbBr3 (x = 0) and different amounts of chloride (Cl) containing mixed halide perovskites (CH3NH3PbBr3−xClx) were prepared for compositions of x = 0.5, 1, 1.25, 1.75. It reveals that bulk CH3NH3PbBr3−xClx samples are highly crystalline and exists in pure single cubic phase with an increased tolerance factor as compared to pure CH3NH3PbBr3. The CH3NH3PbBr3 perovskite has space-group Pm-3 m and a cell parameter of 5.930 Å (volume = 206 Å). The synthesis route adopted here gives access to hybrid perovskites powders with high Cl content and hence enables the band gap to be precisely tuned over a range from 2.26 to 2.49 eV. The powder samples display the subtle shifts in the emission spectra and the photoluminescence kinetics exhibits a decrease in average lifetime by increasing the Cl contents due to the presence of trap states in the structures that encourage non-radiative recombination of charge carrier. Conventionally, the CH3NH3PbBr3-based inverted solar cell architecture is prepared via mixing of the CH3NH3Br and PbBr2 precursors. In contrast, herein, the precursor solutions are directly prepared from the CH3NH3PbBr3 powder and the active layer of the inverted perovskite solar cells are then spin coated using this solution. The high Voc value of the fabricated solar cells potentially makes it a promising candidate for tandem photovoltaic, photocatalytic water splitting, and semi-transparent photovoltaic applications.PostprintPostprintPeer reviewe

Morphological, chemical, and electronic changes of the conjugated polymer PTB7 with thermal annealing

This work was supported by the Office of Naval Research NDSEG fellowship (V.S.) and the Department of Energy SCGSR Program (L.J.P.). Work was partially supported by the Department of the Navy, Office of Naval Research Award No. N00014-14-1-0580 (S.D.O., M.F.T.). L.K.J., I.R., and I.D.W.S. were supported by the Engineering and Physical Sciences Research Council (grants EP/L017008/1 and EP/L012294/1 ). I.D.W.S. also acknowledges support from a Royal Society Wolfson Research Merit Award. Use of the Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, is supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Contract No. DE-AC02-76SF00515.There is considerable interest in improving the performance of organic optoelectronic devices through processing techniques. Here, we study the effect of high-temperature annealing on the properties of the semiconducting polymer PTB7 and PTB7:fullerene blends, of interest as efficient organic photovoltaic (OPV) devices. Annealing to moderate temperature improves the PTB7 morphology and optoelectronic properties. High-temperature annealing also improves morphology but results in poorer optoelectronic properties. This is a result of side chain cleavage that creates by-products that act as trap states, increasing electronic disorder and decreasing mobility. We further observe changes to the PTB7 chemical structure after thermal cleavage that are similar to those following solar irradiation. This implies that side chain cleavage is an important mechanism in device photodegradation, which is a major ?burn-in? loss mechanism in OPV. These results lend insight into side chain cleavage as a method of improving optoelectronic properties and suggest strategies for improvement in device photostability.Publisher PDFPeer reviewe

High-speed MIMO communication and simultaneous energy harvesting using novel organic photovoltaics

A data rate of 363-Mb/s is achieved in a multiple-input-multiple-output experiment using 4 organic photovoltaics as receivers. The same system simultaneously extracted 10.9-mW. The resulting system model predicts 133-Gb/s using a 1000-cell organic solar panel

Highly efficient fullerene and non-fullerene based ternary organic solar cells incorporating a new tetrathiocin-cored semiconductor

A new dual-chain oligothiophene-based organic semiconductor, EH-5T-TTC, is presented. The molecule contains two conjugated chains linked by a fused tetrathiocin core. X-ray crystallography reveals a boat conformation within the 8-membered sulfur heterocycle core and extensive π-π and intermolecular sulfur-sulfur interactions in the bulk, leading to a 2-dimensional structure. This unusual molecule has been studied as a ternary component in organic solar cell blends containing the electron donor PTB7-Th and both fullerene (PC71BM) and non-fullerene acceptors ITIC and EH-IDTBR. By incorporating EH-5T-TTC as a ternary component, the power conversion efficiency of the binary blends containing non-fullerene acceptor increases by 17 % (from 7.8 % to 9.2 %) and by 85 % for the binary blend with fullerene acceptor (from 3.3 % to 6.3%). Detailed characterisation of the ternary blend systems implies that the ternary small molecule EH-5T-TTC functions differently in polymer:fullerene and polymer:non-fullerene blends and has dual functions of morphology modification and complementary spectral absorption

Morphology changes upon scaling a high-efficiency, solution-processed solar cell

Solution processing via roll-to-roll (R2R) coating promises a low cost, low thermal budget, sustainable revolution for the production of solar cells. Poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3′′′-di(2-octyldodecyl)-2,2′;5′,2′′;5′′,2′′′-quaterthiophen-5,5-diyl)], PffBT4T-2OD, has recently been shown to achieve high power conversion efficiency (&gt;10%) paired with multiple acceptors when thick films are spun-coat from hot solutions. We present detailed morphology studies of PffBT4T-2OD based bulk heterojunction films deposited by the volume manufacturing compatible techniques of blade-coating and slot-die coating. Significant aspects of the film morphology, the average crystal domain orientation and the distribution of the characteristic phase separation length scales, are remarkably different when deposited by the scalable techniques vs. spun-coat. Yet, we find that optimized blade-coated devices achieve PCE &gt; 9.5%, nearly the same as spun-coat. These results challenge some widely accepted propositions regarding what is an optimal BHJ morphology and suggest the hypothesis that diversity in the morphology that supports high performance may be a characteristic of manufacturable systems, those that maintain performance when coated thicker than ≈200 nm. In situ measurements reveal the key differences in the solidification routes for spin- and blade-coating leading to the distinct film structures.</p

Status report on emerging photovoltaics

This report provides a snapshot of emerging photovoltaic (PV) technologies. It consists of concise contributions from experts in a wide range of fields including silicon, thin film, III-V, perovskite, organic, and dye-sensitized PVs. Strategies for exceeding the detailed balance limit and for light managing are presented, followed by a section detailing key applications and commercialization pathways. A section on sustainability then discusses the need for minimization of the environmental footprint in PV manufacturing and recycling. The report concludes with a perspective based on broad survey questions presented to the contributing authors regarding the needs and future evolution of PV