19,052 research outputs found
U.S. TRADE POLICIES FOR MEETING OUR INTERNATIONAL OBLIGATIONS
International Relations/Trade,
Graphite fiber-polyimide composite rod end bearings for high-temperature high-load applications
Self-aligning plain spherical and plain cylindical oscillating bearings with self-lubricating elements are composed of 50 weight-percent chopped graphite fibers and 50 weight-percent polyimide
Zirconium, Barium, Lanthanum and Europium Abundances in Open Clusters
We present an analysis of the s-process elements Zr, Ba, and La and the
r-process element Eu in a sample of 50 stars in 19 open clusters. Stellar
abundances of each element are based on measures of a minimum of two lines per
species via both equivalent width and spectrum synthesis techniques. We
investigate cluster mean neutron-capture abundance trends as a function of
cluster age and location in the Milky Way disk and compare them to results
found in other studies in the literature. We find a statistically significant
trend of increasing cluster [Ba/Fe] as a function of decreasing cluster age, in
agreement with recent findings for other open cluster samples, supporting the
increased importance of low-mass asymptotic giant branch stars to the
generation of s-process elements. However, the other s-process elements,
[La/Fe] and [Zr/Fe], do not show similar dependences, in contrast to
theoretical expectations and the limited observational data from other studies.
Conversely, cluster [Eu/Fe] ratios show a slight increase with increasing
cluster age, although with marginal statistical significance. Ratios of
[s/r]-process abundances, [Ba/Eu] and [La/Eu], however, show more clearly the
increasing efficiency of s-process relative to r-process enrichment in open
cluster chemical evolution, with significant increases among younger clusters.
Last, cluster neutron-capture element abundances appear to be independent of
Galactocentric distance. We conclude that a homogeneous analysis of a larger
sample of open clusters is needed to resolve the apparent discrepant
conclusions between different studies regarding s-process element abundance
trends with age to better inform models of galactic chemical evolution.Comment: 24 pages, 13 figures, 10 tables; published in The Astronomical
Journa
Work function determination of promising material for thermionic converters
The work done to fabricate Marchuk plasma discharge tubes for measurement of the cesiated emission of lanthanum hexaboride and thoriated tungsten electrodes is described. A photon counting pyrometer was completed and is to be calibrated with a gold standard
Construction of N = 2 Chiral Supergravity Compatible with the Reality Condition
We construct N = 2 chiral supergravity (SUGRA) which leads to Ashtekar's
canonical formulation. The supersymmetry (SUSY) transformation parameters are
not constrained at all and auxiliary fields are not required in contrast with
the method of the two-form gravity. We also show that our formulation is
compatible with the reality condition, and that its real section is reduced to
the usual N = 2 SUGRA up to an imaginary boundary term.Comment: 16 pages, late
Graphite-fiber-reinforced polyimide liners of various compositions in plain spherical bearings
A plain spherical bearing design with a ball diameter of 28.6 mm, a race length of 12.7 mm, and a 1.7-mm-thick, molded composite liner was evaluated. The liner material is a self-lubricating composite of graphite-fiber-reinforced polyimide resin (GFRPI). The liner is prepared by transfer molding a mixture of one part chopped graphite fiber and one part partially polymerized resin into the space between the bearing ball and the outer race and then completing the polymerization under heat and pressure. Several liner compositions were evaluated: two types of polyimide, condensation and addition; two types of graphite fiber, low and high modulus; and four powder additives - cadmium oxide, cadmium iodide, graphite fluoride, and molybdenum disulfide. The bearings were oscillated + or - 15 deg at 1 Hz for 20 kilocycles under a radial unit load of 29 MN sq m (4200 psi) in dry air at 25, 200, or 315 C. Both types of fiber and polyimide gave low friction and wear. A simple equation was developed to fit the wear-time data and adequately predicted wear to 100 kilocycles
Control of nonlinear systems in regions of state space
Control of nonlinear systems in regions of state spac
A discrete-time differential dynamic programming algorithm with application to optimal orbit transfer
Discrete time differential dynamic programming algorithm with application to optimal orbit transfe
Friction and wear of plasma-sprayed coatings containing cobalt alloys from 25 deg to 650 deg in air
Four different compositions of self-lubricating, plasma-sprayed, composite coatings with calcium fluoride dispersed throughout cobalt alloy-silver matrices were evaluated on a friction and wear apparatus. In addition, coatings of the cobalt alloys alone and one coating with a nickel alloy-silver matrix were evaluated for comparison. The wear specimens consisted of two, diametrically opposed, flat rub shoes sliding on the coated, cylindrical surface of a rotating disk. Two of the cobalt composite coatings gave a friction coefficient of about 0.25 and low wear at room temperature, 400 and 650 C. Wear rates were lower than those of the cobalt alloys alone or the nickel alloy composite coating. However, oxidation limited the maximum useful temperature of the cobalt composite coating to about 650 C compared to about 900 C for the nickel composite coating
Some effects of composition on friction and wear of graphite-fiber-reinforced polyimide liners in plain spherical bearings
Oscillating, plain spherical bearings with graphite-fiber-reinforced polyimide (GFRPI) liners were tested for friction and wear from 25 to 315 C. A condensation polymer was compared with an addition polymer, and a high-modulus fiber was compared with a lower cost, low-modulus fiber. All polymer-fiber combinations gave friction coefficients from 0.05 to 0.18 and low wear. Adding CdO and CdI2 reduced the wear of degassed bearings in dry air. These additives were not needed when the bearing liners contained adsorbed moisture. Although, at 25 C, MoS2 reduced the friction and wear of the base composite at unit loads above 70,000,000 N/m squared (10,000 psi), it had no beneficial effect at lighter loads
- …