SpK: A fast atomic and microphysics code for the high-energy-density regime

SpK is part of the numerical codebase at Imperial College London used to model high energy density physics (HEDP) experiments. SpK is an efficient atomic and microphysics code used to perform detailed configuration accounting calculations of electronic and ionic stage populations, opacities and emissivities for use in post-processing and radiation hydrodynamics simulations. This is done using screened hydrogenic atomic data supplemented by the NIST energy level database. An extended Saha model solves for chemical equilibrium with extensions for non-ideal physics, such as ionisation potential depression, and non thermal equilibrium corrections. A tree-heap (treap) data structure is used to store spectral data, such as opacity, which is dynamic thus allowing easy insertion of points around spectral lines without a-priori knowledge of the ion stage populations. Results from SpK are compared to other codes and descriptions of radiation transport solutions which use SpK data are given. The treap data structure and SpK’s computational efficiency allows inline post-processing of 3D hydrodynamics simulations with a dynamically evolving spectrum stored in a treap

Synthetic nuclear diagnostics for inferring plasma properties of inertial confinement fusion implosions

A suite of synthetic nuclear diagnostics has been developed to post-process radiation hydrodynamics simulations performed with the code Chimera. These provide experimental observables based on simulated capsule properties and are used to assess alternative experimental and data analysis techniques. These diagnostics include neutron spectroscopy, primary and scattered neutron imaging, neutron activation, γ-ray time histories and carbon γ-ray imaging. Novel features of the neutron spectrum have been analysed to infer plasma parameters. The nT and nD backscatter edges have been shown to provide a shell velocity measurement. Areal density asymmetries created by low mode perturbations have been inferred from the slope of the downscatter spectrum down to 10 MeV. Neutron activation diagnostics showed significant aliasing of high mode areal density asymmetries when observing a capsule implosion with 3D multimode perturbations applied. Carbon γ-ray imaging could be used to image the ablator at a high convergence ratio. Time histories of both the fusion and carbon γ signals showed a greater time difference between peak intensities for the perturbed case when compared to a symmetric simulation

Neutron backscatter edge: A measure of the hydrodynamic properties of the dense DT fuel at stagnation in ICF experiments

The kinematic lower bound for the single scattering of neutrons produced in deuterium-tritium (DT) fusion reactions produces a backscatter edge in the measured neutron spectrum. The energy spectrum of backscattered neutrons is dependent on the scattering ion velocity distribution. As the neutrons preferentially scatter in the densest regions of the capsule, the neutron backscatter edge presents a unique measurement of the hydrodynamic conditions in the dense DT fuel. It is shown that the spectral shape of the edge is determined by the scattering rate weighted fluid velocity and temperature of the dense DT fuel layer during neutron production. In order to fit the neutron spectrum, a model for the various backgrounds around the backscatter edge is developed and tested on synthetic data produced from hydrodynamic simulations of OMEGA implosions. It is determined that the analysis could be utilized on current inertial confinement fusion experiments in order to measure the dense fuel properties

Exploring extreme magnetization phenomena in directly driven imploding cylindrical targets

This paper uses extended-magnetohydrodynamics (MHD) simulations to explore an extreme magnetized plasma regime realizable by cylindrical implosions on the OMEGA laser facility. This regime is characterized by highly compressed magnetic fields (greater than 10 kT across the fuel), which contain a significant proportion of the implosion energy and induce large electrical currents in the plasma. Parameters governing the different magnetization processes such as Ohmic dissipation and suppression of instabilities by magnetic tension are presented, allowing for optimization of experiments to study specific phenomena. For instance, a dopant added to the target gas-fill can enhance magnetic flux compression while enabling spectroscopic diagnosis of the imploding core. In particular, the use of Ar K-shell spectroscopy is investigated by performing detailed non-LTE atomic kinetics and radiative transfer calculations on the MHD data. Direct measurement of the core electron density and temperature would be possible, allowing for both the impact of magnetization on the final temperature and thermal pressure to be obtained. By assuming the magnetic field is frozen into the plasma motion, which is shown to be a good approximation for highly magnetized implosions, spectroscopic diagnosis could be used to estimate which magnetization processes are ruling the implosion dynamics; for example, a relation is given for inferring whether thermally driven or current-driven transport is dominating

Radiative cooling effects on reverse shocks formed by magnetized supersonic plasma flows

We study the structure of reverse shocks formed by the collision of supersonic, magnetized plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminum wire arrays, the shock is sharp and well-defined, consistent with magneto-hydrodynamic theory. In contrast, we do not observe a well-defined shock using tungsten wires, and instead we see a broad region dominated by density fluctuations on a wide range of spatial scales. We diagnose these two very different interactions using interferometry, Thomson scattering, shadowgraphy, and a newly developed imaging refractometer that is sensitive to small deflections of the probing laser corresponding to small-scale density perturbations. We conclude that the differences in shock structure are most likely due to radiative cooling instabilities, which create small-scale density perturbations elongated along magnetic field lines in the tungsten plasma. These instabilities grow more slowly and are smoothed by thermal conduction in the aluminum plasma

Impact of stalk on directly driven inertial confinement fusion implosions

Low-mode asymmetries have emerged as one of the primary challenges to achieving high-performing inertial confinement fusion (ICF) implosions. In direct-drive ICF, an important potential seed of such asymmetries is the capsule stalk mount, the impact of which has remained a contentious question. In this paper, we describe the results from an experiment on the OMEGA laser with intentional offsets at varying angles to the capsule stalk mount, which clearly demonstrates the impact of the stalk mount on implosion dynamics. The angle between stalk and offset is found to significantly impact observables. Specifically, a larger directional flow is observed in neutron spectrum measurements when the offset is toward rather than away from the stalk, while an offset at 42° to the stalk gives minimal directional flow but still generates a large flow field in the implosion. No significant directional flow is seen due to stalk only. Time-integrated x-ray images support these flow observations. A trend is also seen in implosion yield, with lower yield obtained for offsets with a smaller angle than with a larger angle toward the stalk. Radiation hydrodynamic simulations using 2D DRACO and 2D/3D Chimera not including the stalk mount and using 2D xRAGE including the stalk mount are brought to bear on the data. The yield trend, the minimal directional flow with stalk only, and the larger flow enhancement observed with the offset toward the stalk are all reproduced in the xRAGE simulations. The results strongly indicate that the stalk impact must be considered and mitigated to achieve high-performing implosions

Potential Impact of Benzodiazepine Use on the Rate of Hip Fractures in Five Large European Countries and the United States

Benzodiazepine use increases the risk of falls and has been associated with an increased risk of hip fractures. Our aim was to estimate the possible population impact of the use of benzodiazepines on the rate of hip fracture in France, Germany, Italy, Spain, the United Kingdom, and the United States. We conducted a literature review to estimate the pooled relative risk (RR) for hip fractures and use of benzodiazepines. Prevalence rates of benzodiazepine use in 2009 were calculated for each country using the IMS MIDAS database and three public databases in Denmark, the Netherlands, and Norway. Both the RR and prevalence rates were used for calculation of population attributable risks (PARs) of hip fractures associated with benzodiazepine use. The literature review showed an increased risk of hip fractures in benzodiazepine users (RR = 1.4, 95 % CI 1.2–1.6). Rate of benzodiazepine use showed considerable differences between countries, ranging from 4.7 % to 22.3 % of population ever in a 1-year period. These are reflected in results for the PARs; estimated attributions of benzodiazepines to the rate of hip fractures were 1.8 %, 95 % CI 1.1–2.6 (Germany); 2.0 %, 95 % CI 1.2–2.8 (United Kingdom); 5.2 %, 95 % CI 3.2–7.3 (Italy); 7.4 %, 95 % CI 4.5–10.0 (France); 8.0 %, 95 % CI 4.9–11.0 (United States); and 8.2 %, 95 % CI 5.1–12.0 (Spain). PAR estimates suggest that the potential attribution of benzodiazepine use on the population rate of hip fractures in the five specified European countries and the United States varies between 1.8 % and 8.2 %. During the next phase of the IMI-PROTECT study, a comparison with individual patient data will show whether this approach is valid

Increased ion temperature and neutron yield observed in magnetized indirectly driven D_{2}-filled capsule implosions on the national ignition facility

The application of an external 26 Tesla axial magnetic field to a D_{2} gas-filled capsule indirectly driven on the National Ignition Facility is observed to increase the ion temperature by 40% and the neutron yield by a factor of 3.2 in a hot spot with areal density and temperature approaching what is required for fusion ignition [1]. The improvements are determined from energy spectral measurements of the 2.45 MeV neutrons from the D(d,n)^{3}He reaction, and the compressed central core B field is estimated to be ∼4.9  kT using the 14.1 MeV secondary neutrons from the D(T,n)^{4}He reactions. The experiments use a 30 kV pulsed-power system to deliver a ∼3  μs current pulse to a solenoidal coil wrapped around a novel high-electrical-resistivity AuTa_{4} hohlraum. Radiation magnetohydrodynamic simulations are consistent with the experiment

Effect of strongly magnetized electrons and Ions on heat flow and symmetry of inertial fusion implosions

This Letter presents the first observation on how a strong, 500 kG, externally applied B field increases the mode-two asymmetry in shock-heated inertial fusion implosions. Using a direct-drive implosion with polar illumination and imposed field, we observed that magnetization produces a significant increase in the implosion oblateness (a 2.5 × larger P 2 amplitude in x-ray self-emission images) compared with reference experiments with identical drive but with no field applied. The implosions produce strongly magnetized electrons ( ω e τ e ≫ 1 ) and ions ( ω i τ i > 1 ) that, as shown using simulations, restrict the cross field heat flow necessary for lateral distribution of the laser and shock heating from the implosion pole to the waist, causing the enhanced mode-two shape

A neo-institutional perspective on ethical decision-making

Drawing on neo-institutional theory, this study aims to discern the poorly understood ethical challenges confronted by senior executives in Indian multinational corporations and identify the strategies that they utilize to overcome them. We conducted in-depth interviews with 40 senior executives in Indian multinational corporations to illustrate these challenges and strategies. By embedding our research in contextually relevant characteristics that embody the Indian environment, we identify several institutional- and managerial-level challenges faced by executives. The institutional-level challenges are interpreted as regulative, normative and cognitive shortcomings. We recommend a concerted effort at the institutional and managerial levels by identifying relevant strategies for ethical decision-making. Moreover, we proffer a multi-level model of ethical decision-making and discuss our theoretical contributions and practical implications