96 research outputs found
The spectroscopic impedance of cellophane
Paper presented at the Fifth International Conference on Electromagnetic Wave Interaction with Water and Moist Substances, 2003, Rotorua, N. Z.The electrical impedance of cellophane has been measured as a function of moisture content and
temperature in the frequency range 10⁻³ – 10⁵ Hz. The data show a very strong dependence on moisture content,
which is a typical characteristic of hygroscopic solids, and at low frequencies, remarkable constant phase angle
spectra were obtained. Making use of the hopping model of conduction in non-crystalline solids, we explain the
measured spectra. The model treats absorbed water as an impurity in the cellophane and conduction is predicted to
occur by temperature-activated proton hopping between water molecules. We also propose that this model is widely
applicable to prediction of the low frequency dielectric properties of hygroscopic solids
Improving statistical inference on pathogen densities estimated by quantitative molecular methods: malaria gametocytaemia as a case study
BACKGROUND: Quantitative molecular methods (QMMs) such as quantitative real-time polymerase chain reaction (q-PCR), reverse-transcriptase PCR (qRT-PCR) and quantitative nucleic acid sequence-based amplification (QT-NASBA) are increasingly used to estimate pathogen density in a variety of clinical and epidemiological contexts. These methods are often classified as semi-quantitative, yet estimates of reliability or sensitivity are seldom reported. Here, a statistical framework is developed for assessing the reliability (uncertainty) of pathogen densities estimated using QMMs and the associated diagnostic sensitivity. The method is illustrated with quantification of Plasmodium falciparum gametocytaemia by QT-NASBA. RESULTS: The reliability of pathogen (e.g. gametocyte) densities, and the accompanying diagnostic sensitivity, estimated by two contrasting statistical calibration techniques, are compared; a traditional method and a mixed model Bayesian approach. The latter accounts for statistical dependence of QMM assays run under identical laboratory protocols and permits structural modelling of experimental measurements, allowing precision to vary with pathogen density. Traditional calibration cannot account for inter-assay variability arising from imperfect QMMs and generates estimates of pathogen density that have poor reliability, are variable among assays and inaccurately reflect diagnostic sensitivity. The Bayesian mixed model approach assimilates information from replica QMM assays, improving reliability and inter-assay homogeneity, providing an accurate appraisal of quantitative and diagnostic performance. CONCLUSIONS: Bayesian mixed model statistical calibration supersedes traditional techniques in the context of QMM-derived estimates of pathogen density, offering the potential to improve substantially the depth and quality of clinical and epidemiological inference for a wide variety of pathogens
Mobile laminar air flow screen for additional operating room ventilation: reduction of intraoperative bacterial contamination during total knee arthroplasty
Background Surgical site infections are important complications in orthopedic surgery. A mobile laminar air flow (LAF) screen could represent a useful addition to an operating room (OR) with conventional turbulent air ventilation (12.5 air changes/h), as it could decrease the bacterial count near the operating field. The purpose of this study was to evaluate LAF efficacy at reducing bacterial contamination in the surgical area during 34 total knee arthroplasties (TKAs). Materials and methods The additional unit was used in 17 operations; the LAF was positioned beside the operating table between two of the surgeons, with the air flow directed towards the surgical area (wound). The whole team wore conventional OR clothing and the correct hygiene procedures and rituals were used. Bacterial air contamination (CFU/m3) was evaluated in the wound area in 17 operations with the LAF unit and 17 without the LAF unit. Results The LAF unit reduced the mean bacterial count in the wound area from 23.5 CFU/m3 without the LAF to 3.5 CFU/m3 with the LAF (P<0.0001), which is below the suggested limit for anORwith ultraclean laminar ventilation. There were no significant differences in the mean bacterial count in the instrument table area: 28.6 CFU/m3 were recorded with the LAF (N = 6) unit and 30.8 CFU/m3 (N = 6) without the LAF unit (P = 0.631). During six operations with LAF and six without LAF, particle counts were performed and the number of 0.5 lm particles was analyzed. The particle counts decreased significantly when the LAF unit was used (P = 0.003). Conclusion When a mobile LAF unit was added to the standard OR ventilation, bacterial contamination of the wound area significantly decreased to below the accepted level for an ultraclean OR, preventing SSI infections
Prior outpatient antibiotic use as predictor for microbial aetiology of community-acquired pneumonia: hospital-based study
Objective: The causative micro-organism in community-acquired pneumonia (CAP) is often difficult to predict. Different studies have examined chronic morbidity and clinical symptoms as predictors for microbial aetiology of pneumonia. The aim of our study was to assess whether prior outpatient antimicrobial treatment is predictive for determining the microbial aetiology of CAP. Methods: This was a hospital-based prospective observational study including all patients admitted with CAP between 1 October 2004 and 1 August 2006. Microbial investigations included sputum, blood culture, sputum PCR, antigen testing and serology. Exposure to antimicrobial drugs prior to hospital admission was ascertained through community pharmacy dispensing records. Multivariate logistic regression analysis was conducted to assess whether prior outpatient antimicrobial treatment is a predictor of microbial aetiology. Patient demographics, co-morbidities and pneumonia severity were considered to be other potential predictors. Results: Overall, 201 patients were included in the study. The microbial aetiology was determined in 64% of the patients. The five most prevalent pathogens were Streptococcus pneumoniae, Heamophilus influenzae, Legionella spp., Mycoplasma pneumoniae and Influenza virus A+B. Forty-seven of the patients (23%) had received initial antimicrobial treatment as outpatients. Multivariate analyses revealed that initial outpatient beta-lactam treatment was associated with a threefold increased chance of finding atypical pathogens and a threefold decreased probability of pneumococcal infection; the corresponding odds ratios were 3.51 (95% CI 1.25-9.99) and 0.30 (95% CI 0.10-0.90), respectively. Patients who received macrolides prior to hospitalisation had an increased probability of viral pneumonia. Conclusion: Prior outpatient antimicrobial therapy has a predictive value in the diagnostic workup aimed at identifying the causative pathogen and planning corresponding antimicrobial treatment in patients hospitalised for pneumonia
Epidemiology and Clinical Features of Patients with Visceral Leishmaniasis Treated by an MSF Clinic in Bakool Region, Somalia, 2004–2006
Our paper describes the epidemiological features of visceral leishmaniasis in the Bakool region, South Central Somalia, over the years 2004 to 2006. Since 2000, Médecins Sans Frontières has been providing care for patients suffering from visceral leishmaniasis in Huddur, located in a region endemic for visceral leishmaniasis. By the end of 2005, we witnessed a dramatic increase in the number of patients admitted to the Huddur centre with visceral leishmaniasis. In our paper, we provide a description of the profile of patients admitted, thus giving an insight into the epidemiology of visceral leishmaniasis in a part of the world where relatively little has been documented and where the true magnitude of this neglected disease remains unknown
Manifestações intratorácicas das doenças do colágeno na tomografia computadorizada de alta resolução do tórax
Causative agent distribution and antibiotic therapy assessment among adult patients with community acquired pneumonia in Chinese urban population
<p>Abstract</p> <p>Background</p> <p>Knowledge of predominant microbial patterns in community-acquired pneumonia (CAP) constitutes the basis for initial decisions about empirical antimicrobial treatment, so a prospective study was performed during 2003–2004 among CAP of adult Chinese urban populations.</p> <p>Methods</p> <p>Qualified patients were enrolled and screened for bacterial, atypical, and viral pathogens by sputum and/or blood culturing, and by antibody seroconversion test. Antibiotic treatment and patient outcome were also assessed.</p> <p>Results</p> <p>Non-viral pathogens were found in 324/610 (53.1%) patients among whom <it>M. pneumoniae </it>was the most prevalent (126/610, 20.7%). Atypical pathogens were identified in 62/195 (31.8%) patients carrying bacterial pathogens. Respiratory viruses were identified in 35 (19%) of 184 randomly selected patients with adenovirus being the most common (16/184, 8.7%). The nonsusceptibility of <it>S. pneumoniae </it>to penicillin and azithromycin was 22.2% (Resistance (R): 3.2%, Intermediate (I): 19.0%) and 79.4% (R: 79.4%, I: 0%), respectively. Of patients (312) from whom causative pathogens were identified and antibiotic treatments were recorded, clinical cure rate with β-lactam antibiotics alone and with combination of a β-lactam plus a macrolide or with fluoroquinolones was 63.7% (79/124) and 67%(126/188), respectively. For patients having mixed <it>M. pneumoniae </it>and/or <it>C. pneumoniae </it>infections, a better cure rate was observed with regimens that are active against atypical pathogens (e.g. a β-lactam plus a macrolide, or a fluoroquinolone) than with β-lactam alone (75.8% vs. 42.9%, <it>p </it>= 0.045).</p> <p>Conclusion</p> <p>In Chinese adult CAP patients, <it>M. pneumoniae </it>was the most prevalent with mixed infections containing atypical pathogens being frequently observed. With <it>S. pneumoniae</it>, the prevalence of macrolide resistance was high and penicillin resistance low compared with data reported in other regions.</p
Mantle Pb paradoxes : the sulfide solution
Author Posting. © Springer, 2006. This is the author's version of the work. It is posted here by permission of Springer for personal use, not for redistribution. The definitive version was published in Contributions to Mineralogy and Petrology 152 (2006): 295-308, doi:10.1007/s00410-006-0108-1.There is growing evidence that the budget of Pb in mantle peridotites is largely
contained in sulfide, and that Pb partitions strongly into sulfide relative to silicate melt. In
addition, there is evidence to suggest that diffusion rates of Pb in sulfide (solid or melt)
are very fast. Given the possibility that sulfide melt ‘wets’ sub-solidus mantle silicates,
and has very low viscosity, the implications for Pb behavior during mantle melting are
profound. There is only sparse experimental data relating to Pb partitioning between
sulfide and silicate, and no data on Pb diffusion rates in sulfides. A full understanding of
Pb behavior in sulfide may hold the key to several long-standing and important Pb
paradoxes and enigmas. The classical Pb isotope paradox arises from the fact that all
known mantle reservoirs lie to the right of the Geochron, with no consensus as to the
identity of the “balancing” reservoir. We propose that long-term segregation of sulfide
(containing Pb) to the core may resolve this paradox. Another Pb paradox arises from the fact that the Ce/Pb ratio of both OIB and MORB
is greater than bulk earth, and constant at a value of 25. The constancy of this “canonical
ratio” implies similar partition coefficients for Ce and Pb during magmatic processes
(Hofmann et al. 1986), whereas most experimental studies show that Pb is more
incompatible in silicates than Ce. Retention of Pb in residual mantle sulfide during
melting has the potential to bring the bulk partitioning of Ce into equality with Pb if the
sulfide melt/silicate melt partition coefficient for Pb has a value of ~ 14. Modeling shows
that the Ce/Pb (or Nd/Pb) of such melts will still accurately reflect that of the source, thus
enforcing the paradox that OIB and MORB mantles have markedly higher Ce/Pb (and
Nd/Pb) than the bulk silicate earth. This implies large deficiencies of Pb in the mantle
sources for these basalts. Sulfide may play other important roles during magmagenesis:
1). advective/diffusive sulfide networks may form potent metasomatic agents (in both
introducing and obliterating Pb isotopic heterogeneities in the mantle); 2). silicate melt
networks may easily exchange Pb with ambient mantle sulfides (by diffusion or
assimilation), thus ‘sampling’ Pb in isotopically heterogeneous mantle domains
differently from the silicate-controlled isotope tracer systems (Sr, Nd, Hf), with an
apparent ‘de-coupling’ of these systems.Our intemperance
should not be blamed on the support we gratefully acknowledge from NSF: EAR-
0125917 to SRH and OCE-0118198 to GAG
The role of the myosin ATPase activity in adaptive thermogenesis by skeletal muscle
Resting skeletal muscle is a major contributor to adaptive thermogenesis, i.e., the thermogenesis that changes in response to exposure to cold or to overfeeding. The identification of the “furnace” that is responsible for increased heat generation in resting muscle has been the subject of a number of investigations. A new state of myosin, the super relaxed state (SRX), with a very slow ATP turnover rate has recently been observed in skeletal muscle (Stewart et al. in Proc Natl Acad Sci USA 107:430–435, 2010). Inhibition of the myosin ATPase activity in the SRX was suggested to be caused by binding of the myosin head to the core of the thick filament in a structural motif identified earlier by electron microscopy. To be compatible with the basal metabolic rate observed in vivo for resting muscle, most myosin heads would have to be in the SRX. Modulation of the population of this state, relative to the normal relaxed state, was proposed to be a major contributor to adaptive thermogenesis in resting muscle. Transfer of only 20% of myosin heads from the SRX into the normal relaxed state would cause muscle thermogenesis to double. Phosphorylation of the myosin regulatory light chain was shown to transfer myosin heads from the SRX into the relaxed state, which would increase thermogenesis. In particular, thermogenesis by myosin has been proposed to play a role in the dissipation of calories during overfeeding. Up-regulation of muscle thermogenesis by pharmaceuticals that target the SRX would provide new approaches to the treatment of obesity or high blood sugar levels
Does the adoption of EUCAST susceptibility breakpoints affect the selection of antimicrobials to treat acute community-acquired respiratory tract infections?
- …