Multisensory perception and action: development, decision-making, and neural mechanisms

Surrounded by multiple objects and events, receiving multisensory stimulation, our brain must sort through relevant and irrelevant multimodal signals to correctly decode and represent the information from the same and different objects and, respectively, events in the physical world. Over the last two decades, scientific interest has increased dramatically in how we integrate multisensory information and how we interact with a multisensory world, as evidenced by exponential growth of the relevant studies using behavioral and/or neuro-scientific approaches. The Special Issue topic of “Multisensory perception and action: psychophysics, neural mechanisms, and applications” emerged from a scientific meeting dedicated to these issues: the Munich Multisensory Perception Symposium held in Holzhausen am Ammersee, Germany (June 24–26, 2011). This volume, which collects research articles contributed by attendees of the symposium as well as the wider community, is organized into three interrelated sections: (I) Development, learning, and decision making in multisensory perception (II) Multisensory timing and sensorimotor temporal integration (III) Electrophysiological and neuro-imaging analyses of multisensory perceptio

Assessment of the potential of MERIS near-infrared water vapour products to correct ASAR interferometric measurements

Atmospheric water vapour is a major limitation for high precision Interferometric Synthetic Aperture Radar (InSAR) applications due to its significant impact on microwave signals. We propose a statistical criterion to test whether an independent water vapour product can reduce water vapour effects on InSAR interferograms, and assess the potential of the Medium Resolution Imaging Spectrometer (MERIS) near-infrared water vapour products for correcting Advanced SAR (ASAR) data. Spatio-temporal comparisons show c. 1.1mm agreement between MERIS and GPS/radiosonde water vapour products in terms of standard deviations. One major limitation with the use of MERIS water vapour products is the frequency of cloud free conditions. Our analysis indicates that in spite of the low global cloud free conditions (~25%), the frequency can be much higher for certain areas such as Eastern Tibet (~38%) and Southern California (~48%). This suggests that MERIS water vapour products show potential for correcting ASAR interferometric measurements in certain regions

Evaluation of ASTER GDEM ver2 using GPS measurements and SRTM ver4.1 in China

The freely available ASTER GDEM ver2 was released by NASA and METI on October 17, 2011. As one of the most complete high resolution digital topographic data sets of the world to date, the ASTER GDEM covers land surfaces between 83°N and 83°S at a spatial resolution of 1 arc-second and will be a useful product for many applications, such as relief analysis, hydrological studies and radar interferometry. The stated improvements in the second version of ASTER GDEM benefit from finer horizontal resolution, offset adjustment and water body detection in addition to new observed ASTER scenes. This study investigates the absolute vertical accuracy of the ASTER GDEM ver2 at five study sites in China using ground control points (GCPs) from high accuracy GPS benchmarks, and also using a DEM-to-DEM comparison with the Consultative Group for International Agriculture Research Consortium for Spatial Information (CGIAR-CSI) SRTM DEM (Version 4.1). And then, the results are separated into GlobCover land cover classes to derive the spatial pattern of error. It is demonstrated that the RMSE (19m) and mean (-13m) values of ASTER GDEM ver2 against GPS-GCPs in the five study areas is lower than its first version ASTER GDEM ver1 (26m and -21m) as a result of the adjustment of the elevation offsets in the new version. It should be noted that the five study areas in this study are representative in terms of terrain types and land covers in China, and even for most of mid-latitude zones. It is believed that the ASTER GDEM offers a major alternative in accessibility to high quality elevation data

Temporal perception of visual-haptic events in multimodal telepresence system

Book synopsis: Haptic interfaces are divided into two main categories: force feedback and tactile. Force feedback interfaces are used to explore and modify remote/virtual objects in three physical dimensions in applications including computer-aided design, computer-assisted surgery, and computer-aided assembly. Tactile interfaces deal with surface properties such as roughness, smoothness, and temperature. Haptic research is intrinsically multi-disciplinary, incorporating computer science/engineering, control, robotics, psychophysics, and human motor control. By extending the scope of research in haptics, advances can be achieved in existing applications such as computer-aided design (CAD), tele-surgery, rehabilitation, scientific visualization, robot-assisted surgery, authentication, and graphical user interfaces (GUI), to name a few. Advances in Haptics presents a number of recent contributions to the field of haptics. Authors from around the world present the results of their research on various issues in the field of haptics

Geometrical factor in multi-interface homostructures

In an experimental investigation carried out on multilayer silicon homostructures (of the n+-n-n+ type) an electric interaction between the two homointerfaces through majority carriers as a function of the geometrical factor has been shown. The two model homointerfaces were formed in the same monocrystal (CVD epitaxy) by only an abrupt change in the impurity doping level. Samples differing in the spacing of their parallel interfaces were characterized in the stationary and steady states (static and quasi-static regimes) to reveal modifications in their macroscopic transport. It has been demonstrated that the thermionic emission current, normally taken into account in the barrier transport (with large potential barriers) dominates in only two of five characteristic bias intervals. The two other phenomena, also related to the geometrical factor, i.e. the diffusion-drift and tunneling currents, dominate the conduction over practically the whole dc-bias range. These results allow the study of short and long range electrical interactions as well as the free carrier micromovement of simple and complex semiconductor interfaces of multilayer devices

Perception of delay in haptic telepresence systems

Time delay is recognized as an important issue in haptic telepresence systems as it is inherent to long-distance data transmission. What factors influence haptic delay perception in a time-delayed environment are, however, largely unknown. In this article, we examine the impact of manual movement frequency and amplitude in a sinusoidal exploratory movement as well as the stiffness of the haptic environment on the detection threshold for delay in haptic feedback. The results suggest that the detection of delay in force feedback depends on the movement frequency and amplitude, while variation of the absolute feedback force level does not influence the detection threshold. A model based on the exploration movement is proposed and guidelines for system design with respect to the time delay in haptic feedback are provided

Mass movement susceptibility mapping using satellite optical imagery compared with InSAR monitoring: Zigui County, Three Gorges region, China

Mass movements on steep slopes are a major hazard to communities and infrastructure in the Three Gorges region, China. Developing susceptibility maps of mass movements is therefore very important in both current and future land use planning. This study employed satellite optical imagery and an ASTER GDEM (15 m) to derive various parameters (namely geology; slope gradient; proximity to drainage networks and proximity to lineaments) in order to create a GIS-based map of mass movement susceptibility. This map was then evaluated using highly accurate deformation signals processed using the Persistent Scatterer (PS) InSAR technique. Areas of high susceptibility correspond well to points of high subsidence, which provides a strong support of our susceptibility map

Unusual Formation of Point-Defect Complexes in the Ultrawide-Band-Gap Semiconductor β-Ga2 O3

Understanding the unique properties of ultra-wide band gap semiconductors requires detailed information about the exact nature of point defects and their role in determining the properties. Here, we report the first direct microscopic observation of an unusual formation of point defect complexes within the atomic-scale structure of β-Ga2O3 using high resolution scanning transmission electron microscopy (STEM). Each complex involves one cation interstitial atom paired with two cation vacancies. These divacancy-interstitial complexes correlate directly with structures obtained by density functional theory, which predicts them to be compensating acceptors in β-Ga2O3. This prediction is confirmed by a comparison between STEM data and deep level optical spectroscopy results, which reveals that these complexes correspond to a deep trap within the band gap, and that the development of the complexes is facilitated by Sn doping through increased vacancy concentration. These findings provide new insight on this emerging material's unique response to the incorporation of impurities that can critically influence their properties

MRI-based mechanical analysis of carotid atherosclerotic plaque using a material-property-mapping approach: A material-property-mapping method for plaque stress analysis

Background and objective Atherosclerosis is a major underlying cause of cardiovascular conditions. In order to understand the biomechanics involved in the generation and rupture of atherosclerotic plaques, numerical analysis methods have been widely used. However, several factors limit the practical use of this information in a clinical setting. One of the key challenges in finite element analysis (FEA) is the reconstruction of the structure and the generation of a mesh. The complexity of the shapes associated with carotid plaques, including multiple components, makes the generation of meshes for biomechanical computation a difficult and in some cases, an impossible task. To address these challenges, in this study, we propose a novel material-property-mapping method for carotid atherosclerotic plaque stress analysis that aims to simplify the process. Methods The different carotid plaque components were identified and segmented using magnetic resonance imaging (MRI). For the mapping method, this information was used in conjunction with an in-house code, which provided the coordinates for each pixel/voxel and tissue type within a predetermined region of interest. These coordinates were utilized to assign specific material properties to each element in the volume mesh which provides a region of transition. The proposed method was subsequently compared to the traditional method, which involves creating a composed mesh for the arterial wall and plaque components, based on its location and size. Results The comparison between the proposed material-property-mapping method and the traditional method was performed in 2D, 3D structural-only, and fluid-structure interaction (FSI) simulations in terms of stress, wall shear stress (WSS), time-averaged WSS (TAWSS), and oscillatory shear index (OSI). The stress contours from both methods were found to be similar, although the proposed method tended to produce lower local maximum stress values. The WSS contours were also in agreement between the two methods. The velocity contours generated by the proposed method were verified against phase-contrast magnetic resonance imaging (MRI) measurements, for a higher level of confidence. Conclusion This study shows that a material-property-mapping method can effectively be used for analyzing the biomechanics of carotid plaques in a patient-specific manner. This approach has the potential to streamline the process of creating volume meshes for complex biological structures, such as carotid plaques, and to provide a more efficient and less labor-intensive method

Contextual cueing: implicit memory of tactile context facilitates tactile search

In visual search, participants detect and subsequently discriminate targets more rapidly when these are embedded in repeatedly encountered distractor arrangements, an effect termed contextual cueing (Chun & Jiang Cognitive Psychology, 36, 28–71, 1998). However, whereas previous studies had explored contextual cueing exclusively in visual search, in the present study we examined the effect in tactile search using a novel tactile search paradigm. Participants were equipped with vibrotactile stimulators attached to four fingers on each hand. A given search array consisted of four stimuli (i.e., two items presented to each hand), with the target being an odd-one-out feature singleton that differed in frequency (Exps. 1 and 2) or waveform (Exp. 3) from the distractor elements. Participants performed a localization (Exps. 1 and 2) or discrimination (Exp. 3) task, delivering their responses via foot pedals. In all three experiments, reaction times were faster when the arrangement of distractor fingers predicted the target finger. Furthermore, participants were unable to explicitly discriminate repeated from nonrepeated tactile configurations (Exps. 2 and 3). This indicates that the tactile modality can mediate the formation of configural representations and use these representations to guide tactile search