The Universality of Human Rights: A Response

A response to: Mayerfeld, J., Ackerly, B., Shue, H., Donnelly, J., Tan, K., & Beitz, C. (2007). Exploring universal rights: A symposium. Human Rights, Human Welfare, 7. https://digitalcommons.du.edu/hrhw/vol7/iss1/24

Aligning Forces on Wood Particles in an Electric Field

Electrostatic alignment affords a promising route to improved mechanical properties in anisotropic particleboards aimed at competition with sawn lumber in structural uses. A quartz-fiber torque balance was used to measure the aligning torque exerted on elongated wood particles by DC and AC fields over a range of wood moisture content, field intensity, and frequency. Approximate predicting equations relating aligning torque to relevant process parameters have been developed, which should aid the process designer. The dynamics of free-falling particles in an electric field favors small slender particles and high field intensity for best alignment. However, slender particles have long charge relaxation times and thus require high moisture content for effective alignment in a field of a given frequency

Discovery of Aspergillus frankstonensis sp. nov. during environmental sampling for animal and human fungal pathogens

Invasive fungal infections, IFI, due to species in Aspergillus section Fumigati, ASF, including the Aspergillus viridinutans species complex, AVSC, are increasingly reported in humans and cats. The risk of exposure to these medically important fungi in Australia is unknown. Air and soil was sampled from the domiciles of pet cats diagnosed with these IFI and from a nature reserve in Frankston, Victoria, where Aspergillus viridinutans sensu stricto was discovered in, . Of, ASF species isolated, were A. fumigatus sensu stricto, were AVSC, A. felis-clade and A. frankstonensis sp. nov., and, were other species, . Seven pathogenic ASF species known to cause disease in humans and animals, A. felis-clade, A. fischeri, A. thermomutatus, A. lentulus, A. laciniosus A. fumisynnematus, A. hiratsukae, comprised, of isolates overall. AVSC species were only isolated from Frankston soil where they were abundant, suggesting a particular ecological niche. Phylogenetic, morphological and metabolomic analyses of these isolates identified a new species, A. frankstonensis that is phylogenetically distinct from other AVSC species, heterothallic and produces a unique array of extrolites, including the UV spectrum characterized compounds DOLD, RAIMO and CALBO. Shared morphological and physiological characteristics with other AVSC species include slow sporulation, optimal growth at, ÊC, no growth at, ÊC, and viriditoxin production. Overall, the risk of environmental exposure to pathogenic species in ASF in Australia appears to be high, but there was no evidence of direct environmental exposure to AVSC species in areas where humans and cats cohabitate.Jessica J. Talbot, Jos Houbraken, Jens C. Frisvad, Robert A. Samson, Sarah E. Kidd, John Pitt, Sue Lindsay, Julia A. Beatty, Vanessa R. Barr

MACHINING ELIMINATION THROUGH APPLICATION OF THREAD FORMING FASTENERS IN NET SHAPED CAST HOLES

The ultimate objective of this work was to eliminate approximately 30% of the machining performed in typical automotive engine and transmission plants by using thread forming fasteners in as-cast holes of aluminum and magnesium cast components. The primary issues at the source of engineersÃÂÃÂÃÂÃÂÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂàreluctance to implementing thread forming fasteners in lightweight castings are: * Little proof of consistency of clamp load vs. input torque in either aluminum or magnesium castings. * No known data to understand the effect on consistency of clamp load as casting dies wear. The clamp load consistency concern is founded in the fact that a portion of the input torque used to create clamp load is also used to create threads. The torque used for thread forming may not be consistent due to variations in casting material, hole size and shape due to tooling wear and process variation (thermal and mechanical). There is little data available to understand the magnitude of this concern or to form the basis of potential solutions if the range of clamp load variation is very high (> +/- 30%). The range of variation that can be expected in as-cast hole size and shape over the full life cycle of a high pressure die casting die was established in previous work completed by Pacific Northwest National Laboratory, (PNNL). This established range of variation was captured in a set of 12 cast bosses by designing core pins at the size and draft angles identified in the sited previous work. The cast bosses were cut into ÃÂÃÂÃÂÃÂÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂnutsÃÂÃÂÃÂÃÂÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂàthat could be used in the Ford Fastener Laboratory test-cell to measure clamp load when a thread forming fastener was driven into a cast nut. There were two sets of experiments run. First, a series of cast aluminum nuts were made reflecting the range of shape and size variations to be expected over the life cycle of a die casting die. Taptite thread forming fasteners, (a widely used thread forming fastener suitable for aluminum applications), were driven into the various cored, as-cast nuts at a constant input torque and resulting clamp loads were recorded continuously. The clamp load data was used to determine the range of clamp loads to be expected. The bolts were driven to failure. The clamp load corresponding to the target input of 18.5 Nm was recorded for each fastener. In a like fashion, a second set of experiments were run with cast magnesium nuts and ALtracs thread forming fasteners, (a widely used thread forming fastener suitable for magnesium applications). Again all clamp loads were recorded and analyzed similarly to the Taptites in aluminum cast nuts. Results from previous work performed on the same test cell for a Battelle project using standard M8 bolts into standard M8 nuts were included as a comparator for a standard bolt and nut application. The results for the thread forming fasteners in aluminum cast holes were well within industry expectations of +/- 30% for out of the box and robustness range testing. The results for the dry and lubed extreme conditions were only slightly higher than industry expectations at +/- 35.6%. However, when compared to the actual Battelle results (+/- 40%) for a standard bolt and nut the tread forming fasteners performed slightly better. The results for the thread forming fasteners in magnesium cast holes were all well within industry expectations of +/- 30% for all three conditions. The robustness range (.05mm larger and smaller holes than the expected wear pattern of a die casting die at full life cycle) results also fell within the industry expectations for standard threaded fasteners. These results were very encouraging. It was concluded that this work showed that clamp load variation with thread forming fasteners is consistent with industry expectations for standard steel bolts and nuts at +/- 30%. There does not appear to be any significant increase in clamp load variation due to the application of thread forming fasteners in as-cast holes of aluminum or magnesium over the effective life of a die casting mold. The fully implemented potential benefit of thread forming fasteners in as-cast holes of aluminum and magnesium is estimated to be 6 trillion Btu per year for North America. Economic benefit is estimated to be nearly $800 million per year. Environmental benefits and quality improvements will also result from full implementation of this technology

Augmentation of abscisic acid (ABA) levels by drought does not induce short-term stomatal sensitivity to CO2 in two divergent conifer species

The stomata of conifers display very little short-term response to changes in atmospheric CO2 concentration (Ca), whereas the stomatal responses of angiosperms to Ca increase in response to water stress. This behaviour of angiosperm stomata appears to be dependent on foliar levels of abscisic acid (ABAf). Here two alternative explanations for the stomatal insensitivity of conifers to Ca are tested: that conifers have either low ABAf or a higher or absent threshold for ABA-induced sensitivity. The responsiveness of stomatal conductance (gs) to a sequence of transitions in Ca (386, 100, and 600 μmol mol−1) was recorded over a range of ABAf in an angiosperm and two divergent conifer species. The different ABA levels were induced by a mild drought cycle. Although the angiosperm and conifer species showed similar proportional increases in ABAf following drought, conifer stomata remained insensitive to changes in Ca whereas angiosperm stomata showed enhanced sensitivity with increasing ABAf. The conifers, however, had much higher ABAf prior to drought than the angiosperm species, suggesting that non-sensitivity to Ca in these conifers was due to an absent or inactive response/signalling pathway rather than insufficient ABAf