74 research outputs found
Distribution of plantar pressure in healthy controls and patients with type 1 and 2 diabetes
WSTĘP. Celem pracy jest ocena rozkładu podeszwowych nacisków w grupie osób zdrowych i chorych na cukrzycę typu 1 i 2 przy obecności lub braku neuropatii ruchowo-czuciowej. Opisane badania stanowią wstęp do opracowania pierwszego polskiego obuwia profilaktycznego, uwzględniającego odciążenie miejsc wysokiego ryzyka owrzodzenia na stopie.
MATERIAŁ I METODY. Przebadano grupę 215 zdrowych osób, 56 osób chorych na cukrzycę typu 1, 61 chorych na cukrzycę typu 2. Badano zaawansowanie przewlekłych powikłań cukrzycy, szczególnie neuropatii, którą oceniano na podstawie skali NDS, NSS i przewodnictwa nerwowego. Pomiar nacisku [N/cm2] wykonano za pomocą systemu Emed-SF V2.1.
WYNIKI BADAŃ. Wśród osób zdrowych stwierdzono największe naciski pod 2 (38,8 N/cm2) i 3 głową (33,4 N/cm2) kości śródstopia. Podobne wyniki uzyskano w populacji osób chorych na cukrzycę typu 1. U chorych na cukrzycę typu 2 ciśnienie pod 2 (45,5 N/cm2), 3 (39,6 N/cm2), 4 (31,8 N/cm2) głową kości śródstopia było statystycznie istotnie wyższe w porównaniu z populacją zdrowych osób. Podobnie wysokie ciśnienie stwierdzono pod 3 i 4 głową kości śródstopia w cukrzycy typu 2 powikłanej neuropatią.
WNIOSKI.
1. Miejscami największego nacisku u osób zdrowych są: paluch, pięta, 2 i 3 głowa kości śródstopia.
2. U chorych na cukrzycę typu 2 naciski na 2, 3, 4 i 5 głowie kości śródstopia są istotnie statystycznie większe niż u osób zdrowych i chorych na cukrzycę typu 1.
3. U chorych na cukrzycę typu 2 powikłaną neuropatią ruchową i czuciową najwyższe naciski występują na 3 i 4 głowie kości śródstopia i różnią się one istotnie statystycznie od grupy osób zdrowych.
4. Szczególnych zabiegów prewencyjnych w postaci odciążenia główek kości śródstopia wymagają chorzy na cukrzycę typu 2, zwłaszcza powikłaną neuropatią ruchowo-czuciową.OBJECTIVE. To investigate the distribution of plantar
pressures in healthy subjects and in patients with
type 1 and 2 diabetes with or without sensorimotor
neuropathy (SMN). The paper opens a series of studies
aiming at the construction of the first Polish
prophylactic footwear, which would offload the sites
at high risk of plantar foot ulceration.
MATERIAL AND METHODS. We studied 215 healthy
subjects, 56 patients with type 1 diabetes, and 61
patients with type 2 diabetes. Chronic complications of diabetes were evaluated, especially neuropathy
based upon NDS score, NSS score and neural conduction.
We used the Emed-SF V2.1 system to measure
plantar pressures [N/cm2].
RESULTS. Among the healthy individuals the highest
pressures were observed below the second and the
third metatarsal head (38,8 N/cm2 and 33,4 N/cm2,
respectively). Similar results were found in the group
of type 1 diabetes patients. However, the patients
with type 2 diabetes mellitus had statistically significant
higher pressures below the second, the third,
and the fourth metatarsal head when compared with
non-diabetic controls (45,5 N/cm2, 39,6 N/cm2,
31,8 N/cm2, respectively). Similar results below the
third and fourth metatarsal head were observed in
the group of type 2 diabetes patients complicated
by diabetic neuropathy.
CONCLUSIONS.
1. The highest pressures in healthy subjects were
identified under great toe, the second and
third metatarsal head.
2. Patients with type 2 diabetes have significantly
higher pressures under the second through
fifth metatarsal heads as compared with
healthy subjects and type 1 diabetics.
3. In patients with type 2 diabetes complicated
by SMN the highest pressures are found under
the third and fourth metatarsal head, being significantly
different from healthy subjects.
4. Special preventive procedures i.e. offloading
metatarsal heads are necessary in patients
with type 2 diabetes, especially those with
concomitant SMN
A mofette in Złockie (Sądecki Beskid) as a geological attraction
The most beautiful Polish mofette occurs in the Sądecki (Sącz) Beskid, within the Krynica tectonic-facial zone of the Magura Unit (Inner Carpathians). It is located in the Złocki Stream upstream of the Złockie village in the Muszyna commune. The occurrence has numerous exhalations of CO2 in the valley floor and on the sides of this boggy stream as well as in the „Zatopione” and „Bulgotka” springs. It is also the site of the dry exhalation „Dychawka”. The floor of the valley is covered with gelatinous rusty-brown deposits of iron oxyhydroxides that precipitate either due to chemical or organic processes (the latter initiated by numerous microorganisms, mainly ferruginous bacteria). The site is legally protected as the Professor Henryk Świdziński monument of inanimate nature. In September 2005 it was made accessible for tourists and currently is an important geological attraction in the Popradzki Landscape Park
Valuable sites of the inanimate nature in the GórY SŁONNE Landscape Park
Park Krajobrazowy Gór Słonnych usytuowany jest we wschodniej części Karpat zewnętrznych. Zajmuje powierzchnię około 51 tys. ha, głównie na terenie jednostki skolskiej, częściowo podśląskiej i śląskiej. Zaproponowano objęcie ochroną 15 geologicznych stanowisk dokumentacyjnych występujących na terenie Parku. Przedstawiono również cztery kolejne stanowiska geologiczne do ochrony jako pomniki przyrody nieożywionej. Wskazano także na znajdujące się na terenie Parku obszary eksploatacji ropy naftowej, mogące pełnić rolę geologiczno-przemysłowych obiektów dziedzictwa geologicznego
Mofetta from Tylicz in the Magura Nappe of the Outer Carpathians
The described mofetta of CO2 is located in the Sądecki Beskid Mts, within the Poprad Landscape Park in Tylicz near Krynica, where it can be found on the SE slope of the Szalone hill, between the Syhowny and Bradowiec streams, the rightbank tributaries of the Muszynka Stream. The mouth of the mofetta, whose coordinates are: longitude 21o00'20”E, latitude 49o23’25’’N, and altitude 577 m a.s.l., is currently situated within a private holiday center. Geologically, the mofetta is situated within the Maszkowice Sandstone Member of the Magura Formation, in the SE part of the Magura Nappe of the Outer Carpathians. In its close vicinity the tectonic-facies Krynica zone is thrusted onto the Bystrzyca zone and the thrust line is intersected by the Tylicz dislocation. The daily volume of the gas discharged is estimated at fifteen or so thousand cubic meters with CO2 being the main constituent (almost 95%), while minor constituents include N2 (3.87%), CH4 (0.62%) and O2 (0.21%). The h13C value of the CO2 of the Tylicz mofetta is -1.05% against V-PDB. The gases of the mofetta are accompanied by an outflow of the carbonated water (HCO3-Ca-Mg + CO2 type, TDS 1.8 g/dm3) from the Lis spring, where abundant gelatinous, rusty-colored deposits of iron oxyhydroxides precipitate. In the years 1962-1966 the CO2 exhaled from the mofetta was utilized in experiments on algae growing, mainly for manufacturing an algae fodder. In the year 2011 the mofetta in Tylicz was made accessible to the publi
Bioactive carbon-metal coatings for medical applications
The mechanical, chemical and biological properties of prostheses can be modified by thin coatings. Presently, carbon based coatings are often applied mainly to improve mechanical properties of the covered parts of the artificial prostheses. Particularly useful mechanical properties (such as good adhesion, high hardness, elasticity, etc.) are obtained when the coatings are formed by ion techniques such as the IBSD – Ion Beam Sputter Deposition and IBAD – Ion Beam Assisted Deposition. The chemical and biological properties of carbon coatings can be modified by metallic additives. In the ion-based techniques the metallic additives can be introduced into the coating in a few ways: by ion implantation of the chosen metal into the carbon substrate, by the IBAD technique working with two beams in the dual beam mode, or by using a complex sputtered target, composed of carbon and the selected metal. The final properties of the complex carbon – metal coating are related to the method used for its formation. In this work carbon–Ti and carbon–Ag coatings were investigated. All the coatings were formed by the IBSD or by DB IBAD techniques on UHMWPE and PU substrates. For each type of coatings the depth composition, chemical bonds and mechanical properties were determined. The morphology and thermal stability of the carbon–metal coatings were investigated mainly by the confocal dispersive Raman microspectrometry
- …