8,454 research outputs found
Recommended from our members
Ultrathin graphitic structures and carbon nanotubes in a purified synthetic graphite
A new class of carbon structure is reported, which consists of microscale graphitic shells bounded by curved and faceted planes containing two to five layers. These structures were originally found in a commercial graphite produced by the Acheson process, followed by a purification treatment. The particles, which could be several hundreds of nanometres in size, were frequently decorated with nanoscale carbon particles, or short nanotubes. In some cases, nanotubes were found to be seamlessly connected to the thin shells, indicating that the formation of the shells and that of the nanotubes are intimately connected. The structures are believed to form during a purification process which involves passing an electric current through the graphite in the presence of a reactive gas. In support of this, it is shown that similar particles can be produced in a standard carbon arc apparatus. With their extremely thin graphene walls and high surface areas, the new structures may have a range of useful properties
Recommended from our members
Structural transformation of graphite by arc-discharge
The formation of novel structures by the passage of an electric current through graphite is described. These structures apparently consist of hollow three-dimensional graphitic shells bounded by curved and faceted planes, typically made up of two graphene layers. The curved structures were frequently decorated with nano-scale carbon particles, or short nanotubes. In some cases, nanotubes were found to be seamlessly connected to the thin shells, indicating that the formation of the shells and the nanotubes is intimately connected. Small nanotubes or nanoparticles were also sometimes found encapsulated inside the hollow structures, while fullerene-like particles were often seen attached to the outside surfaces. With their high surface areas and structural perfection, the new carbon structures may have applications as anodes of lithium ion batteries or as components of composite materials
Recommended from our members
Imaging the atomic structure of activated carbon
The precise atomic structure of activated carbon is unknown, despite its huge commercial importance in the purification of air and water. Diffraction methods have been extensively applied to the study of microporous carbons, but cannot provide an unequivocal identification of their structure. Here we show that the structure of a commercial activated carbon can be imaged directly using aberration-corrected transmission electron microscopy. Images are presented both of the as-produced carbon and of the carbon following heat treatment at 2000 degrees C. In the 2000 degrees C carbon clear evidence is found for the presence of pentagonal rings, suggesting that the carbons have a fullerene-related structure. Such a structure would help to explain the properties of activated carbon, and would also have important implications for the modelling of adsorption on microporous carbons
Restorative practice and behaviour management in schools: discipline meets care.
The history of restorative practices in New Zealand schools is directly related to projects such as the Suspension Reduction Initiative (SRI) and the more recent Student Engagement Initiative (SEI); thus the origins of restorative practices in schools are linked with behaviour management and school discipline. During the same period, teachers' work has become more complex: They are working with an increasingly diverse range of students, which in turn requires epistemologically diverse teaching and relationship-building approaches to ensure maximum participation for all. Teachers are looking for new and better ways to interact with students in their classrooms, and those responsible for disciplinary systems are looking to restorative practice for new ways to resolve the increasing range and number of difficulties between teachers and students, students and other students, and between the school and parents. Restorative practices (RP) are currently seen as a way of achieving all this, so they carry a huge burden of hope. Relationship skills are a key competency in the new curriculum, and the philosophy of restoration offers both a basis for understanding and a process for putting this agenda into practice. In effect, it means educating for citizenship in a diverse world, including teaching the skills of conflict resolution. If we accept this philosophy, the curriculum for teacher education will require significant changes in what students are taught about behaviour and classroom management
Recommended from our members
Novel bilayer graphene structures produced by arc-discharge
A new form of carbon is described, which consists of hollow, three-dimensional shells bounded by bilayer graphene. The new carbon is produced very simply, by passing a current through graphite rods in a commercial arc-evaporation unit. Characterisation of the carbon using high resolution transmission electron microscopy is described, and the possible formation mechanism discussed
Single-particle imaging reveals intraflagellar transportâindependent transport and accumulation of EB1 in \u3cem\u3eChlamydomonas\u3c/em\u3e flagella
The microtubule (MT) plus-end tracking protein EB1 is present at the tips of cilia and flagella; end-binding protein 1 (EB1) remains at the tip during flagellar shortening and in the absence of intraflagellar transport (IFT), the predominant protein transport system in flagella. To investigate how EB1 accumulates at the flagellar tip, we used in vivo imaging of fluorescent proteinâtagged EB1 (EB1-FP) in Chlamydomonas reinhardtii. After photobleaching, the EB1 signal at the flagellar tip recovered within minutes, indicating an exchange with unbleached EB1 entering the flagella from the cell body. EB1 moved independent of IFT trains, and EB1-FP recovery did not require the IFT pathway. Single-particle imaging showed that EB1-FP is highly mobile along the flagellar shaft and displays a markedly reduced mobility near the flagellar tip. Individual EB1-FP particles dwelled for several seconds near the flagellar tip, suggesting the presence of stable EB1 binding sites. In simulations, the two distinct phases of EB1 mobility are sufficient to explain its accumulation at the tip. We propose that proteins uniformly distributed throughout the cytoplasm like EB1 accumulate locally by diffusion and capture; IFT, in contrast, might be required to transport proteins against cellular concentration gradients into or out of cilia
Recommended from our members
The closed-edge structure of graphite and the effect of electrostatic charging
The properties of graphite, and of few-layer graphene, can be strongly influenced by the edge structure of the graphene planes, but there is still much that we do not understand about the geometry and stability of these edges. We present an experimental and theoretical study of the closed edges of graphite crystals, and of the effect of an electric field on their structure. High-resolution transmission electron microscopy is used to image the edge structure of fresh graphite and of graphite that has been exposed to an electric field, which experiences a separation of the graphene layers. Computer simulations based on density functional theory are used to rationalise and quantify the preference for the formation of multiple concentric loops at the edges. A model is also presented to explain how the application of an electric field leads to the separation of the folded edges
Mode-switching: a new technique for electronically varying the agglomeration position in an acoustic particle manipulator
Acoustic radiation forces offer a means of manipulating particles within a fluid. Much interest in recent years has focussed on the use of radiation forces in microfluidic (or âlab on a chipâ) devices. Such devices are well matched to the use of ultrasonic standing waves in which the resonant dimensions of the chamber are smaller than the ultrasonic wavelength in use. However, such devices have typically been limited to moving particles to one or two predetermined planes, whose positions are determined by acoustic pressure nodes/anti-nodes set up in the ultrasonic standing wave. In most cases devices have been designed to move particles to either the centre or (more recently) the side of a flow channel using ultrasonic frequencies that produce a half or quarter wavelength over the channel, respectively.It is demonstrated here that by rapidly switching back and forth between half and quarter wavelength frequencies â mode-switching â a new agglomeration position is established that permits beads to be brought to any arbitrary point between the half and quarter-wave nodes. This new agglomeration position is effectively a position of stable equilibrium. This has many potential applications, particularly in cell sorting and manipulation. It should also enable precise control of agglomeration position to be maintained regardless of manufacturing tolerances, temperature variations, fluid medium characteristics and particle concentration
HST Photometry for the Halo Stars in the Leo Elliptical NGC 3377
We have used the ACS camera on HST to obtain (V,I) photometry for 57,000
red-giant stars in the halo of the Leo elliptical NGC 3377. We use this sample
of stars to derive the metallicity distribution function (MDF) for its halo
field stars, and comment on its chemical evolution history compared with both
larger and smaller E galaxies. Our ACS/WFC field spans a radial range extending
from 4 to 18 kpc projected distance from the center of NGC 3377 and thus covers
a significant portion of this galaxy's halo. We find that the MDF is broad,
reaching a peak at [m/H] ~ -0.6. It may, in addition, have relatively few
stars more metal-rich than [m/H] = -0.3$, although interpretation of the
high-metallicity end of the MDF is limited by photometric completeness that
affects the detection of the reddest, most metal-rich stars. NGC 3377 appears
to have an enrichment history intermediate between those of normal dwarf
ellipticals and the much larger giants. As yet, we find no clear evidence that
the halo of NGC 3377 contains a significant population of ``young'' (< 3 Gy)
stars.Comment: 40 pages, 17 figure
Biomechanical Model for Evaluation of Pediatric Upper Extremity Joint Dynamics During Wheelchair Mobility
Pediatric manual wheelchair users (MWU) require high joint demands on their upper extremity (UE) during wheelchair mobility, leading them to be at risk of developing pain and pathology. Studies have examined UE biomechanics during wheelchair mobility in the adult population; however, current methods for evaluating UE joint dynamics of pediatric MWU are limited. An inverse dynamics model is proposed to characterize three-dimensional UE joint kinematics and kinetics during pediatric wheelchair mobility using a SmartWheel instrumented handrim system. The bilateral model comprises thorax, clavicle, scapula, upper arm, forearm, and hand segments and includes the sternoclavicular, acromioclavicular, glenohumeral, elbow and wrist joints. A single 17 year-old male with a C7 spinal cord injury (SCI) was evaluated while propelling his wheelchair across a 15-meter walkway. The subject exhibited wrist extension angles up to 60°, large elbow ranges of motion and peak glenohumeral joint forces up to 10% body weight. Statistically significant asymmetry of the wrist, elbow, glenohumeral and acromioclavicular joints was detected by the model. As demonstrated, the custom bilateral UE pediatric model may provide considerable quantitative insight into UE joint dynamics to improve wheelchair prescription, training, rehabilitation and long-term care of children with orthopedic disabilities. Further research is warranted to evaluate pediatric wheelchair mobility in a larger population of children with SCI to investigate correlations to pain, function and transitional changes to adulthood
- âŠ