Spawning of yellowfin tuna and skipjack in the Eastern Tropical Pacific, as inferred from studies of gonad development

(PDF contains 70 pages.

Studies of the sexual development and spawning of yellowfin tuna, Neothunnus macropterus, and skipjack, Katsuwonus pelamis, in three areas of the Eastern Pacific Ocean, by examination of gonads.

ENGLISH: Knowledge of the size and age at maturity, spawning seasons, and spawning areas of the tropical tunas supporting the fishery in the Eastern Pacific is an important part of the basic information required for understanding their life history, population structure, and fishery dynamics. Until a few years ago nothing was known of these matters. In 1947 the senior author and one of his colleagues (Schaefer and Marr 1948, Schaefer 1948) were able to demonstrate that both yellowfin tuna and skipjack spawn offshore from Central America at least during the late winter and spring months. During January to April many yellowfin tuna over about 70 cm. total length in commercial catches from that region were found to have gonads in advanced stages of maturity, and specimens caught during late June were found to be spent. Maturing skipjack were collected in late February, and spawned-out fish were observed in late March. Numerous very young juveniles of the yellowfin, down to 10 mm. in length, and two very young juvenile skipjack, were captured in this area between January and May. SPANISH: El conocimiento del tamaño y la edad que corresponden a la primera madurez sexual, así como de las estaciones y áreas de desove de los atunes tropicales que mantienen las pesquerías del Pacífico Oriental, constituyen parte importante de la información que es menester para comprender la historia natural, la estructura de la población y la dinámica de la pesquería. Hasta hace pocos años nada se sabía sobre el particular. En 1947 el autor principal y uno de sus colegas (Schaefer y Marr, 1948; Schaefer, 1948) pudieron demostrar que tanto el atún aleta amarilla como el barrilete desovan en el mar abierto, frente a América Central, por lo menos durante la última parte del invierno y en la primavera. De enero a abril encontraron que muchos de los atunes aleta amarilla de más de 70 cm. de longitud total, procedentes de las pescas comerciales de dicha región; tenían gónadas en avanzados estados de madurez, mientras que ejemplares pescados hacia fines de junio ya habían desovado. Se recolectaron barriletes en vías de maduración a fines de febrero, al paso que en los últimos días de marzo se encontraron especímenes que ya habían desovado. Numerosos ejemplares muy juveniles del atún aleta amarilla, tan pequeños como 10 mm., y dos barriletes también muy juveniles, fueron pescados en esta región entre enero y mayo. (PDF contains 65 pages.

Austrian higher education institutions' idiosyncrasies and technology transfer system

The aim of this paper is to present the findings of a PhD research (Heinzl, 2007) conducted on the Universities of Applied Sciences in Austria. The research is to establish an idiosyncrasy model for Universities of Applied Sciences in Austria showing the effects of their idiosyncrasies on the ability to successfully conduct technology transfer. Research applied in the study is centred on qualitative methods as major emphasis is placed on theory building. The study pursues a stepwise approach for the establishment of the idiosyncrasy model. In the first step, an initial technology transfer model and list of idiosyncrasies are established based on a synthesis of findings from secondary research. In the second step, these findings are enhanced by the means of empirical research including problem-centred expert interviews, a focus group and participant observation. In the third step, the idiosyncrasies are matched with the factors conducive for technology transfer and focused interviews have been conducted for this purpose. The findings show that idiosyncrasies of Universities of Applied Sciences have remarkable effects on their technology transfer abilities. This paper presents four of the models that emerge from the PhD research: Generic Technology Transfer Model (Section 5.1); Idiosyncrasies Model for the Austrian Universities of Applied Sciences (Section 5.2); Idiosyncrasies-Technology Transfer Effects Model (Section 5.3); Idiosyncrasies-Technology Transfer Cumulated Effects Model (Section 5.3). The primary and secondary research methods employed for this study are: literature survey, focus groups, participant observation, and interviews. The findings of the research contribute to a conceptual design of a technology transfer system which aims to enhance the higher education institutions' technology transfer performance

NDE of PWA 1480 single crystal turbine blade material

Cantilever bending fatigue specimens were examined by fluorescent liquid penetrant and radioactive gas penetrant (Krypton) non-destructive evaluation (NDE) methods and tested. Specimens with cast, ground, or polished surface were evaluated to study the effect of surface condition on NDE and fatigue crack initiation. Fractographic and metallurgical analyses were performed to determine the nature of crack precursors. Preliminary results show that fatigue strength was lower for specimens with cast surfaces than for specimens with machined surfaces. The liquid penetrant and gas penetrant techniques both provided indications of a large population of defects on the cast surfaces. On ground or polished specimen surfaces, the gas penetrant appeared to estimate the actual number of voids more accurately than the liquid penetrant

Closed form expressions for crack mouth displacements and stress intensity factors for chevron notched short bar and short rod specimens based on experimental compliance measurements

A set of equations are presented describing certain fracture mechanics parameters for chevron notch bar and rod specimens. They are developed by fitting compliance calibration data reported earlier. The equations present the various parameters in their most useful forms. The data encompass the entire range of the specimen geometries most commonly used. Their use will facilitate the testing and analysis of brittle metals, ceramics, and glasses

Development and Initial Validation of a Questionnaire to Measure Health-Related Quality of Life of Adults with Common Variable Immune Deficiency: The CVID_QoL Questionnaire.

BACKGROUND: Generic health status quality of life (QoL) instruments have been used in patients with common variable immune deficiency (CVID). However, by their nature, these tools may over- or underestimate the impact of diseases on an individual's QoL. OBJECTIVE: The objective of this study was to develop and validate a questionnaire to measure specific-health-related QoL for adults with CVID (CVID_QoL). METHODS: The 32-item content of the CVID_QoL questionnaire was developed using focus groups and individual patient interviews. Validation studies included 118 adults with CVID who completed Short Form-36, Saint George Respiratory Questionnaire, General Health Questionnaire-12, and EuroQol-5D questionnaire in a single session. Principal component and factor analysis solutions identified 3 scores to be similar in number and content for each solution. Validation of 3 factor scores was performed by construct validity. Reproducibility, reliability, convergent validity, and discriminant validity were evaluated. Matrices consisting of correlations between the 32 items in the CVID_QOL were calculated. RESULTS: Factor analysis identified 3 dimensions: emotional functioning (EF), relational functioning (RF), and gastrointestinal and skin symptoms (GSS). The instrument had good internal consistency (Cronbach's alpha, min. 0.74 for GSS, max. 0.84 for RF, n = 118) and high reproducibility (intraclass correlation coefficient, min. 0.79 for RF, max 0.90 for EF, n = 27). EF and RF scores showed good convergent validity correlating with conceptually similar dimensions of other study scales. Acute and relapsing infections had a significant impact on EF and RF. CONCLUSIONS: This study provides evidence of the reliability and construct validity of the CVID_QoL to identify QoL issues in patients with CVID that may not be addressed by generic instruments

The gastric acid pocket is attenuated in H. pylori infected subjects

Objective Gastric acid secretory capacity in different anatomical regions, including the postprandial acid pocket, was assessed in Helicobacter pylori positive and negative volunteers in a Western population. Design We studied 31 H. pylori positive and 28 H. pylori negative volunteers, matched for age, gender and body mass index. Jumbo biopsies were taken at 11 predetermined locations from the gastro-oesophageal junction and stomach. Combined high-resolution pH metry (12 sensors) and manometry (36 sensors) was performed for 20 min fasted and 90 min postprandially. The squamocolumnar junction was marked with radio-opaque clips and visualised radiologically. Biopsies were scored for inflammation and density of parietal, chief and G cells immunohistochemically. Results Under fasting conditions, the H. pylori positives had less intragastric acidity compared with negatives at all sensors >1.1 cm distal to the peak lower oesophageal sphincter (LES) pressure (p<0.01). Postprandially, intragastric acidity was less in H. pylori positives at sensors 2.2, 3.3 and 4.4 cm distal to the peak LES pressure (p<0.05), but there were no significant differences in more distal sensors. The postprandial acid pocket was thus attenuated in H. pylori positives. The H. pylori positives had a lower density of parietal and chief cells compared with H. pylori negatives in 10 of the 11 gastric locations (p<0.05). 17/31 of the H. pylori positives were CagA-seropositive and showed a more marked reduction in intragastric acidity and increased mucosal inflammation. Conclusions In population volunteers, H. pylori positives have reduced intragastric acidity which most markedly affects the postprandial acid pocket

The Effect of Complex Training on Muscle Architecture in Rugby League Players

PURPOSE: To compare the effects of variable-resistance complex training (VRCT) versus traditional complex training (TCT) on muscle architecture in rugby league players during a 6-week mesocycle. METHODS: Twenty-four rugby league players competing in the British University & Colleges Sport (BUCS) Premier North Division were randomized to VRCT (n = 8), TCT (n = 8), or control (n = 8). Experimental groups completed a 6-week lower-body complex training intervention (2×/wk), which involved alternating high-load resistance exercise with plyometric exercise in the same session. The VRCT group performed resistance exercises at 70% of 1-repetition maximum (1RM) + 0% to 23% of 1RM from band resistance with a 90-second intracontrast rest interval, whereas the TCT group performed resistance exercise at 93% of 1RM with a 4-minute intracontrast rest interval. Muscle thickness (MT), pennation angle, and fascicle length (Lf) were assessed for the vastus lateralis (VL) and gastrocnemius medialis using ultrasound imaging. RESULTS: Both TCT and VRCT groups significantly improved VL MT and VL Lf compared with control (all P < .05). Standardized within-group changes in MT and Lf (Cohen dav ± 95% CI) were moderate for TCT (dav = 0.91 ± 1.0; dav = 1.1 ± 1.1) and unclear for VRCT (dav = 0.44 ± 0.99; dav = 0.47 ± 0.99), respectively. Differences in change scores between TCT and VRCT were unclear. CONCLUSIONS: VRCT and TCT can be utilized during the competitive season to induce favorable MT and Lf muscle architecture adaptations for the VL. TCT may induce greater muscle architecture adaptations of the VL, whereas VRCT may be of more practical value given the shorter intracontrast rest interval between resistance and plyometric exercises

Effects of In-Season Velocity- Versus Percentage-Based Training in Academy Rugby League Players

Purpose: To compare the effects of velocity-based training (VBT) versus percentage-based training (PBT) on strength, speed and jump performance in academy rugby league players during a 7-week in-season mesocycle. Methods: Twenty-seven rugby league players competing in the Super League U19s Championship were randomised to VBT (n = 12) or PBT (n = 15). Both groups completed a 7-week resistance training intervention (2x/week) that involved the back squat. The PBT group used a fixed load based on a percentage of one repetition maximum (1RM), whereas the VBT group used a modifiable load based on individualised velocity thresholds. Biomechanical and perceptual data were collected during each training session. Back squat 1RM, countermovement jump (CMJ), reactive strength index (RSI), sprint times, and back squat velocity at 40-90% 1RM were assessed pre- and post-training. Results: The PBT group showed likely to most likely improvements in 1RM strength and RSI, whereas the VBT group showed likely to very likely improvements in 1RM strength, CMJ height, and back squat velocity at 40 and 60% 1RM. Sessional velocity and power were most likely greater during VBT compared with PBT (standardised mean differences [SMDs] = 1.8 to 2.4), whilst time under tension and perceptual training stress were likely lower (SMDs = 0.49 to 0.66). The improvement in back squat velocity at 60% 1RM was likely greater following VBT compared with PBT (SMD = 0.50). Conclusion: VBT can be implemented during the competitive season, instead of traditional PBT, to improve training stimuli, decrease training stress, and promote velocity-specific adaptations