202 research outputs found
Recommended from our members
SYNTHESIS AND CHARACTERIZATION OF CARBON AEROGEL NANOCOMPOSITES CONTAINING DOUBLE-WALLED CARBON NANOTUBES
Carbon aerogels (CAs) are novel mesoporous materials with applications such as electrode materials for super capacitors and rechargeable batteries, adsorbents and advanced catalyst supports. To expand the potential application for these unique materials, recent efforts have focused on the design of CA composites with the goal of modifying the structure, conductivity or catalytic activity of the aerogel. Carbon nanotubes (CNTs) possess a number of intrinsic properties that make them promising materials in the design of composite materials. In addition, the large aspect ratios (100-1000) of CNTs means that small additions (less than 1 vol%) of CNTs can produce a composite with novel properties. Therefore, the homogeneous incorporation of CNTs into a CA matrix provides a viable route to new carbon-based composites with enhanced thermal, electrical and mechanical properties. One of the main challenges in preparing CNT composites is achieving a good uniform dispersion of nanotubes throughout the matrix. CAs are typically prepared through the sol-gel polymerization of resorcinol with formaldehyde in aqueous solution to produce organic gels that are supercritically dried and subsequently pyrolyzed in an inert atmosphere. Therefore, a significant issue in fabricating CA-CNT composites is dispersing the CNTs in the aqueous reaction media. Previous work in the design of CACNT composites have addressed this issue by using organic solvents in the sol-gel reaction to facilitate dispersion of the CNTs. To our knowledge, no data has been published involving the preparation of CA composites containing CNTs dispersed in aqueous media. In this report, we describe a new method for the synthesis of monolithic CA-CNT composites that involves the sol-gel polymerization of resorcinol and formaldehyde in an aqueous solution containing a surfactant-stabilized dispersion of double-walled carbon nanotubes (DWNT). One of the advantages of this approach is that it allows one to uniformly distribute CNTs in the CA matrix without compromising the synthetic control that is afforded by traditional organic sol-gel chemistry over the CA structure. We will describe the physical characterization of these novel materials as well as the influence of DWNT loading on the electrical conductivity of the CA composite
Nanoengineering mechanically robust aerogels via control of foam morphology
Potential of aerogels for technological applications is often limited by their poor mechanical properties. Here, we demonstrate that alumina aerogel monoliths with excellent mechanical properties can be made by controlling the crystallographic phase, shape, and size of nanoligaments. In particular, we show that thermal processing of aerogels with a morphology of interconnected nanoleaflets causes dehydration and associated curling of the nanoleaflets, resulting in a dramatic improvement of mechanical properties. This study shows an effective way to control mechanical properties of the nanoporous solids that can be synthesized with ligaments having a quasi-two-dimensional shape, such as platelets, ribbons, or leaflets.Work at the ANU was supported by the
ARC
Development of Improved Aerogels for Spacecraft Hypervelocity Capture
The highly successful NASA Discovery mission Stardust became the first mission to return samples to Earth from a known comet in January 2006 [1]. The samples were captured during a flyby of comet 81P/Wild2 using aerogel, a very low density, silica (SiO2)-based solid with a highly porous structure [2]. Currently, scientists around the world are studying the cometary particles returned by Stardust and reporting fascinating discoveries about the history of comets and the evolution of our solar system. Given the widely acknowledged success of the Stardust mission, additional comet sample return missions are attractive and competitive concepts for future NASA Discovery-class missions; in particular, additional comet sample return missions will allow the first laboratory studies to investigate the naturally occurring diversity among comets, a crucial scientific question for understanding not just the formation of comets but also the very nature of the early solar system. Though Stardust was highly successful, there are important lessons learned from the mission on which advances in aerogel technology can be base
Entanglement, elasticity and viscous relaxation of actin solutions
We have investigated the viscosity and the plateau modulus of actin solutions
with a magnetically driven rotating disc rheometer. For entangled solutions we
observed a scaling of the plateau modulus versus concentration with a power of
7/5. The measured terminal relaxation time increases with a power 3/2 as a
function of polymer length. We interpret the entanglement transition and the
scaling of the plateau modulus in terms of the tube model for semiflexible
polymers.Comment: 5 pages, 4 figures, published versio
Recommended from our members
Synthesis of Mesostructured Copper Sulfide by Cation Exchange and Liquid Crystal Templating
The development of synthetic pathways to yield advanced functional materials is an important aspect of materials science. In particular, the ability to control and manipulate the chemical composition and structure of inorganic nanomaterials is highly desirable. Two synthetic approaches which show great promise for producing the next generation of functional inorganic nanomaterials are (1) templating of supramolecular assemblies and (2) ion exchange within nanostructured inorganic solids to manipulate chemical composition. Templating of supramolecular assemblies of surfactants and amphiphilic polymers has already proven to be a powerful technique in synthesizing various inorganic structures. Namely, numerous examples of mesostructured metal oxides (SiO{sub 2}, TiO{sub 2}, WO{sub 3}, etc.) have been synthesized by templating the liquid crystalline phases of amphiphilic polymers and surfactants (i.e. vesicles, 2D and 3D hexagonal and cubic phases, etc.) with inorganic precursors, resulting in the formation of highly ordered inorganic-organic hybrid materials. Although the templating of supramolecular assemblies has been successful in generating highly ordered mesostructured metal oxides, there are only a few examples of non-oxidic mesostructured inorganic materials. The recent developments of ion exchange within nanoparticles offer a promising approach to generating novel nanostructured inorganic materials with unique chemical compositions. Konenkamp et al. and Alivisatos et al. have successfully utilized the ion exchange methods to fully transform the chemical composition of simple nanostructured inorganic materials while retaining their shapes. Although the exact mechanism by which the ions exchange while retaining the overall structure is still unclear, this approach combined with templating of supramolecular assemblies can provide a potent technique for obtaining highly ordered inorganic materials with unique structures and chemical compositions. Herein, we describe for the first time, the successful synthesis of highly ordered, mesostructured Cu{sub x}S, by combining the templating of the supramolecular assemblies of non-ionic amphiphilic polymer method with the cation exchange method to transform mesostructured cadmium sulfide (CdS) into mesostructured copper sulfides (CuS, Cu{sub 2}S)
Recommended from our members
Fabrication of Double Shell Targets with a Glass Inner Capsule Supported by SiO2 Aerogel for Shots on the Omega Laser in 2006
Indirectly driven double shell implosions are being investigated as a possible noncryogenic path to ignition on the National Ignition Facility. Lawrence Livermore National Laboratory has made several technological advances that have produced double shell targets that represent a significant improvement to previously fielded targets. The inner capsule is supported inside the ablator shell by SiO{sub 2} aerogel with a nominal density of 50 mg/cm{sup 3}. The aerogel is cast around the inner capsule and then machined concentric to it. The seamless sphere of aerogel containing the embedded capsule is then assembled between the two halves of the ablator shell. The concentricity between the two shells has been improved to less than 1.5 {micro}m. The ablator shell consists of two hemispherical shells that mate at a step joint that incorporates a gap with a nominal thickness of 0.1 {micro}m. Using a new flexure-based tool holder that precisely positions the diamond cutting tool on the diamond turning machine, step discontinuities on the inner surface of the ablator of less than 0.5 {micro}m have been achieved. New methods have been used to comprehensively characterize each of the targets using high-resolution x-ray imaging systems
Recommended from our members
Electronic structure of titania aerogels: Soft x-ray absorption study
Efficient laser-induced 6-8 keV x-ray production from iron oxide aerogel and foil-lined cavity targets
Atomic layer deposition for the conformal coating of nanoporous materials
Atomic layer deposition (ALD) is ideal for applying precise and conformal coatings over nanoporous materials. We have recently used ALD to coat two nanoporous solids: anodic aluminum oxide (AAO) and silica aerogels. AAO possesses hexagonally ordered pores with diameters d ∼ 40 nm and pore length L ∼ 70 microns. The AAO membranes were coated by ALD to fabricate catalytic membranes that demonstrate remarkable selectivity in the oxidative dehydrogenation of cyclohexane. Additional AAO membranes coated with ALD Pd films show promise as hydrogen sensors. Silica aerogels have the lowest density and highest surface area of any solid material. Consequently, these materials serve as an excellent substrate to fabricate novel catalytic materials and gas sensors by ALD
Cigarette smokers' intention to quit smoking in Dire Dawa town Ethiopia: an assessment using the Transtheoretical Model
<p>Abstract</p> <p>Background</p> <p>Cessation of smoking reduces morbidity and mortality related to tobacco smoking. It is essential to explore the intention of individuals to quit smoking to design effective interventions. The objective of this study was to assess cigarette smokers' intention to quit smoking in Dire Dawa town using the Transtheoretical model.</p> <p>Methods</p> <p>From February 15 to 19, 2009, we conducted a community based cross-sectional study among 384 current cigarette smokers in Dire Dawa town east Ethiopia. Data was collected by trained personnel using a pretested structured questionnaire. The data was analyzed using SPSS version 16.0.</p> <p>Results</p> <p>Two hundred and nineteen (57%) smokers in the study area had the intention to quit cigarette smoking within the next six months and all the process of change had an increasing trend across the stages. Based on the Fragestrom test of nicotine dependence of cigarette, 35 (9.1%), 69 (18%) and 48(12.5%) were very high, high and medium dependent on nicotine respectively. For the majority 247(64.3%) of the respondents, the mean score of cons of smoking outweighs the pros score (negative decisional balance). Only 66(17.2%) had high self efficacy not to smoke in places and situations that can aggravate smoking.</p> <p>Conclusions</p> <p>Majority of the smokers had the intention to quit smoking. All the process of change had an increasing trend across the stages. Those who had no intention to quit smoking had high level of dependence on nicotine and low self efficacy. The pros of smoking were decreasing while the cons were increasing across the stages. Stage based interventions should be done to move the smokers from their current stage to an advanced stages of quitting cigarette smoking.</p
- …