4,793 research outputs found
HOW SUCCESSFUL ARE GOVERNMENT INTERVENTIONS IN FOOD MARKETS? INSIGHTS FROM THE PHILIPPINE RICE MARKET
We investigate the Philippine government's price stabilization policy for rice. Seemingly Unrelated Regressions are used to examine the effectiveness of the program at regional and national levels over a 21-year period (January 1983 to December 2003). Results of the regional analysis indicate some NFA-induced spatial and temporal differences in terms of producer prices. The NFA successfully increased producer prices in 5 of 13 regions through stock accumulation and paddy rice purchase at floor prices. NFA stock releases do not correlate strongly with retail prices at the national level, although results from the regional model indicate that NFA stock releases reduced retail prices in five regions, leading to perceptible spatial and temporal differences between regions. Although the NFA support price appears to have been moderately successful in increasing producer prices at a national level, on average, the support price led to an increase in consumer prices in ten regions and contributed little to price stabilization. Overall, therefore, our results indicate very limited success on the part of the NFA to achieve its major objectives at either regional or national level. We suggest the NFA should concentrate its resources in the poorest areas of the country, where it might exert greater and more useful influence in smaller and locally thin rice markets.Marketing,
Gaseous-Hydrogen Pressurant Requirements for the Discharge of Liquid Hydrogen from a 3.96 Meter /13 ft/ Diameter Spherical Tank
Hydrogen gas pressure requirements during pressurization and transfer of liquid hydrogen from spherical tank
Screening properties of Gaussian electrolyte models, with application to dissipative particle dynamics
We investigate the screening properties of Gaussian charge models of
electrolyte solutions by analysing the asymptotic behaviour of the pair
distribution functions. We use a combination of Monte-Carlo simulations with
the hyper-netted chain integral equation closure, and the random phase
approximation, to establish the conditions under which a screening length is
well defined and the extent to which it matches the expected Debye length. For
practical applications, for example in dissipative particle dynamics, we are
able to summarise our results in succinct rules-of-thumb which can be used for
mesoscale modeling of electrolyte solutions. We thereby establish a solid
foundation for future work, such as the systematic incorporation of specific
ion effects.Comment: 9 pages, 9 figures, 1 table, RevTeX4-
Determination of some dominant parameters of the global dynamic sea surface topography from GEOS-3 altimetry
The 1977 altimetry data bank is analyzed for the geometrical shape of the sea surface expressed as surface spherical harmonics after referral to the higher reference model defined by GEM 9. The resulting determination is expressed as quasi-stationary dynamic SST. Solutions are obtained from different sets of long arcs in the GEOS-3 altimeter data bank as well as from sub-sets related to the September 1975 and March 1976 equinoxes assembled with a view to minimizing seasonal effects. The results are compared with equivalent parameters obtained from the hydrostatic analysis of sporadic temperature, pressure and salinity measurements of the oceans and the known major steady state current systems with comparable wavelengths. The most clearly defined parameter (the zonal harmonic of degree 2) is obtained with an uncertainty of + or - 6 cm. The preferred numerical value is smaller than the oceanographic value due to the effect of the correction for the permanent earth tide. Similar precision is achieved for the zonal harmonic of degree 3. The precision obtained for the fourth degree zonal harmonic reflects more closely the accuracy expected from the level of noise in the orbital solutions
Standard Methods for Bolt-Bearing Testing of Textile Composites
The response of three 2-D braided materials to bolt bearing loading was evaluated using data generated by Boeing Defense and Space Group in Philadelphia, PA. Three test methods, stabilized single shear, unstabilized single shear, and double shear, were compared. In general, these textile composites were found to be sensitive to bolt bearing test methods. The stabilized single shear method yielded higher strengths than the unstabilized single shear method in all cases. The double shear test method always produced the highest strengths but these results may be somewhat misleading. It is therefore recommended that standard material comparisons be made using the stabilized single shear test method. The effects of two geometric parameters, W/D and e/D, were also studied. An evaluation of the effect of the specimen width (W) to hole diameter (D) ratio concluded that bolt bearing responses were consistent with open hole tension results. A W/D ratio of 6 or greater should be maintained. The proximity of the hole to the specimen edge significantly affected strength. In all cases, strength was improved by increasing the ratio of the distance from the hole center to the specimen edge (e) to the hole diameter (D) above 2. An e/D ratio of 3 or greater is recommended
Standard methods for open hole tension testing of textile composites
Sizing effects have been investigated by comparing the open hole failure strengths of each of the four different braided architectures as a function of specimen thickness, hole diameter, and the ratio of specimen width to hole diameter. The data used to make these comparisons was primarily generated by Boeing. Direct comparisons of Boeing's results were made with experiments conducted at West Virginia University whenever possible. Indirect comparisons were made with test results for other 2-D braids and 3-D weaves tested by Boeing and Lockheed. In general, failure strength was found to decrease with increasing plate thickness, increase with decreasing hole size, and decreasing with decreasing width to diameter ratio. The interpretation of the sensitive to each of these geometrical parameters was complicated by scatter in the test data. For open hole tension testing of textile composites, the use of standard testing practices employed by industry, such as ASTM D5766 - Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates should provide adequate results for material comparisons studies
Standard methods for filled hole tension testing of textile composites
The effects of two test specimen geometry parameters, the specimen width and W/D ratio, on filled-hole tensile strength were determined for textile composite materials. Test data generated by Boeing and Lockheed on 2-D and 3-D braids, and 3-D weaves were used to make these evaluations. The investigation indicated that filled-hole tensile-strength showed little sensitivity to either parameter. Test specimen configurations used in open-hole tension tests, such as those suggested by ASTM D5766 - Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates or those proposed by MIL-HDBK-17-lD should provide adequate results for material comparisons studies. Comparisons of the materials' open-hole and filled-hole tensile strengths indicated that the latter were generally lower than the former. The 3-D braids were the exception; their filled-hole strengths were unexpected larger than their open-hole strengths. However, these increases were small compared to the scatter in the data. Thus, filled hole tension may be a critical design consideration for textile composite materials
Cognitive impairment and decline in cognitively normal older adults with high amyloid-β: A meta-analysis
AbstractIntroductionThis meta-analysis aimed to characterize the nature and magnitude of amyloid (Aβ)-related cognitive impairment and decline in cognitively normal (CN) older individuals.MethodMEDLINE Ovid was searched from 2012 to June 2016 for studies reporting relationships between cerebrospinal fluid or positron emission tomography (PET) Aβ levels and cognitive impairment (cross-sectional) and decline (longitudinal) in CN older adults. Neuropsychological data were classified into domains of episodic memory, executive function, working memory, processing speed, visuospatial function, semantic memory, and global cognition. Type of Aβ measure, how Aβ burden was analyzed, inclusion of control variables, and clinical criteria used to exclude participants, were considered as moderators. Random-effects models were used for analyses with effect sizes expressed as Cohen's d.ResultsA total of 38 studies met inclusion criteria contributing 30 cross-sectional (N = 5005) and 14 longitudinal (N = 2584) samples. Aβ-related cognitive impairment was observed for global cognition (d = 0.32), visuospatial function (d = 0.25), processing speed (d = 0.18), episodic memory, and executive function (both d's = 0.15), with decline observed for global cognition (d = 0.30), semantic memory (d = 0.28), visuospatial function (d = 0.25), and episodic memory (d = 0.24). Aβ-related impairment was moderated by age, amyloid measure, type of analysis, and inclusion of control variables and decline moderated by amyloid measure, type of analysis, inclusion of control variables, and exclusion criteria used.DiscussionCN older adults with high Aβ show a small general cognitive impairment and small to moderate decline in episodic memory, visuospatial function, semantic memory, and global cognition
- …