Mapping biodiversity value worldwide: combining higher-taxon richness from different groups

Maps of large-scale biodiversity are urgently needed to guide conservation, and yet complete enumeration of organisms is impractical at present. One indirect approach is to measure richness at higher taxonomic ranks, such as families. The difficulty is how to combine information from different groups on numbers of higher taxa, when these taxa may in effect have been defined in different ways, particularly for more distantly related major groups. In this paper, the regional family richness of terrestrial and freshwater seed plants, amphibians, reptiles and mammals is mapped worldwide by combining: (i) absolute family richness; (ii) proportional family richness; and (iii) proportional family richness weighted for the total species richness in each major group. The assumptions of the three methods and their effects on the results are discussed, although for these data the broad pattern is surprisingly robust with respect to the method of combination. Scores from each of the methods of combining families are used to rank the top five richness hotspots and complementary areas, and hotspots of endemism are mapped by unweighted combination of range-size rarity scores

Monolayers of 3He on the Surface of Bulk Superfluid 4He

We have used quantum evaporation to investigate the two-dimensional fermion system that forms at the free surface of (initially isotopically pure) 4He when small quantities of 3He are added to it. By measuring the first-arrival times of the evaporated atoms, we have determined that the 3He-3He potential in this system is V_3S/k_B=(0.23+/-0.02) K nm^2 (repulsive) and estimated a value of m_3S=(1.53+/-0.02)m_3 for the zero-coverage effective mass. We have also observed the predicted second layer-state which becomes occupied once the first layer-state density exceeds about 0.6 monolayers.Comment: 2 pages, 3 figures. Submitted to Proc. LT-22 (1999) to appear in Physica

Relative Evaporation Probabilities of 3He and 4He from the Surface of Superfluid 4He

We report a preliminary experiment which demonstrates that 3He atoms in Andreev states are evaporated by high-energy (E/k_B ~ 10.2 K) phonons in a quantum evaporation process similar to that which occurs in pure 4He. Under conditions of low 3He coverage, high-energy phonons appear to evaporate 3He and 4He atoms with equal probability. However, we have not managed to detect any 3He atoms that have been evaporated by rotons, and conclude that the probability of a roton evaporating a 3He atom is less than 2% of the probability that it evaporates a 4He atom.Comment: 2 pages, 3 figures. Submitted to Proc. LT-22 (1999) Physica

Investigation of Tantalum Wet Slug Capacitor Failures in the Apollo Telescope Mount Charger Battery Regulator Modules

This investigation describes the capacitor failures and to identify the cause of the failure mechanism. Early failures were thought to have happened because of age and/or abuse since the failed capacitors were dated 1967. It is shown that all 1967 capacitors were replaced with 1972 capacitors

Acoustic emission spectral analysis of fiber composite failure mechanisms

The acoustic emission of graphite fiber polyimide composite failure mechanisms was investigated with emphasis on frequency spectrum analysis. Although visual examination of spectral densities could not distinguish among fracture sources, a paired-sample t statistical analysis of mean normalized spectral densities did provide quantitative discrimination among acoustic emissions from 10 deg, 90 deg, and plus or minus 45 deg, plus or minus 45 deg sub s specimens. Comparable discrimination was not obtained for 0 deg specimens

Future monitoring of charged particle energy deposition into the upper atmosphere and comments on possible relationships between atmospheric phenomena and solar and/or geomagnetic activity

Monitoring of earth's atmosphere was conducted for several years utilizing the ITOS series of low-altitude, polar-orbiting weather satellites. A space environment monitoring package was included in these satellites to perform measurements of a portion of earth's charged particle environment. The charged particle observations proposed for the low-altitude weather satellite TIROS N, are described which will provide the capability of routine monitoring of the instantaneous total energy deposition into the upper atmosphere by the precipitation of charged particles from higher altitudes. Such observations may be of use in future studies of the relationships between geomagnetic activity and atmospheric weather pattern developments. Estimates are given to assess the potential importance of this type of energy deposition. Discussion and examples are presented illustrating the importance of distinguishing between solar and geomagnetic activity as possible causative sources. Such differentiation is necessary because of the widely different spatial and time scales involved in the atmospheric energy input resulting from these various sources of activity

The effect of impact damage and circular holes on the compressive strength of a graphite-epoxy laminate

Specimens were impacted by 1.27-cm-diameter aluminum spheres with speeds ranging from 52 to 101 m/s. Some specimens were impacted without any applied compressive load and then loaded to failure to determine their residual strength. Other specimens were loaded to a prescribed axial compressive strain and impacted while at that applied load. Loaded specimens that did not fail catastrophically on impact were subsequently loaded to failure to determine their residual strength. Low-velocity impact damage was found to degrade seriously the laminate static compressive strength. Low-strain compression-compression cyclic loading was found to degrade further the compressive strength of impact-damaged specimens. Specimens with circular holes having diameters up to a third of the specimen width were loaded to failure in compression. It was found that circular holes can also degrade the static compressive strength of the laminate. The effects of circular holes and impact damage on the compressive strength of the laminate are compared

Start-to-end modelling of a mode-locked optical klystron free electron laser amplifier

A free electron laser (FEL) in a mode-locked optical klystron (MLOK) configuration is modelled using start-to-end simulations that simulate realistic electron beam acceleration and transport before input into a full three-dimensional FEL simulation code. These simulations demonstrate that the MLOK scheme is compatible with the present generation of radiofrequency accelerator designs. A train of few-optical cycle pulses is predicted with peak powers similar to those of the equivalent conventional FEL amplifier. The role of electron beam energy modulation in these results is explained and the limitations of some simulation codes discussed. It is shown how seeding the FEL interaction using a High Harmonic seed laser can improve the coherence properties of the output

Effect of Low Velocity Impact Damage on the Compressive Strength of Graphite/Epoxy Hat-Stiffened Panels

Low velocity impact damage on the compressive strength of graphite/epoxy hat stiffened panels is studied. Fourteen panels, representative of minimum-mass designs for two compression load levels were tested. Eight panels were damaged by impact and the effect on compressive strength was evaluated by comparing the results with data for undamaged panels. The impact tests consisted of firing 1.27 cm diameter aluminum projectiles normal to the plane of the panel at a velocity of approximately 55 m/sec to simulate impact from runway debris. The results of this investigation indicate that impact damage in the panels designed for 0.53 MN/m was contained locally and the damaged panels were capable of carrying the design load. The panels designed for 1.58 MN/m failed between 50 and 58 percent of the design load due to impact damage in the high axial stiffness region. The extent of damage in the high axial stiffness region of both panel designs increased with the magnitude of applied axial load. Damage in this region was the most significant factor in reducing panel strength. Limited damage that was not visually detectable reduced ultimate strength as much as extensive visible damage

Effects of 3-d and 4-d-transition metal substitutional impurities on the electronic properties of CrO2

We present first-principles based density functional theory calculations of the electronic and magnetic structure of CrO2 with 3d (Ti through Cu) and 4d (Zr through Ag) substitutional impurities. We find that the half-metallicity of CrO2 remains intact for all of the calculated substitutions. We also observe two periodic trends as a function of the number of valence electrons: if the substituted atom has six or fewer valence electrons (Ti-Cr or Zr-Mo), the number of down spin electrons associated with the impurity ion is zero, resulting in ferromagnetic (FM) alignment of the impurity magnetic moment with the magnetization of the CrO2 host. For substituent atoms with eight to ten (Fe-Ni or Ru-Pd with the exception of Ni), the number of down spin electrons contributed by the impurity ion remains fixed at three as the number contributed to the majority increases from one to three resulting in antiferromagnetic (AFM) alignment between impurity moment and host magnetization. The origin of this variation is the grouping of the impurity states into 3 states with approximate "t2g" symmetry and 2 states with approximate "eg" symmetry. Ni is an exception to the rule because a Jahn-Teller-like distortion causes a splitting of the Ni eg states. For Mn and Tc, which have 8 valence electrons, the zero down spin and 3 down spin configurations are very close in energy. For Cu and Ag atoms, which have 11 valence electrons, the energy is minimized when the substituent ion contributes 5 Abstract down-spin electrons. We find that the interatomic exchange interactions are reduced for all substitutions except for the case of Fe for which a modest enhancement is calculated for interactions along certain crystallographic directions.Comment: 26 pages, 10 figures, 2 table