527 research outputs found
Structural and electronic properties of grain boundaries in graphite: Planes of periodically distributed point defects
We report on scanning tunneling microscopy and spectroscopy of grain
boundaries in highly oriented pyrolytic graphite. Grain boundaries showed a
periodic structure and an enhanced charge density compared to the bare graphite
surface. Two possible periodic structures have been observed along grain
boundaries. A geometrical model producing periodically distributed point
defects on the basal plane of graphite has been proposed to explain the
structure of grain boundaries. Scanning tunneling spectroscopy on grain
boundaries revealed two strong localized states at -0.3 V and 0.4 V.Comment: 5 pages, 5 figure
The role of defects on electron behavior in graphene materials
Graphene-based materials exhibit many unique physical properties that are intriguing for both fundamental science and application purposes. This thesis describes three systems of sp2 bonded carbon: graphite, graphene and fullerene, and studies the electron behavior in these materials and how it is affected by the presence of defects. It is shown here that by inducing specific defects, phenomena such as ferromagnetism and superconductivity can arise in these systems. Graphite and its structural defects are studied by scanning tunneling microscopy and spectroscopy in chapter 2. This chapter represents the first detailed analysis of the structural and electronic properties of grain boundaries in graphite. Grain boundaries are the most common defects in highly oriented pyrolytic graphite (HOPG) because of its polycrystalline character. They form periodic arrays of point defects that are arranged in planes perpendicular to the graphene planes. On the graphite surface, grain boundaries manifest themselves as one-dimensional chains of point defects with a width around 1 nm and a length up to several micrometers. The periodic structure within a single grain boundary displays only two possible distances between point defects. This periodicity was found to be 0.5-10 nm in different grain boundaries. Atomically resolved STM images showed that grain boundaries are tilt grain boundaries, which are created between two rotated graphite grains. A new proposed structural model of grain boundaries based on periodically repeated point defects could explain all observed periodicities in STM. The electronic structure of grain boundaries has been studied locally with scanning tunneling spectroscopy (STS). Grain boundaries possess enhanced charge densities and localized electron states in comparison to the bare graphite surface. These states extend up to 4 nm from grain boundaries. Two localized electron states have been observed on grain boundaries having small periodicities (<4 nm), while a single localized state at the Fermi energy has been measured for larger periodicities, indicating a long-range interaction among point defects within a grain boundary. An unexpected phenomenon in carbon-based materials, ferromagnetism, is studied in chapter 3. Ferromagnetic signals have been observed in HOPG locally by magnetic force microscopy (MFM), and in the bulk magnetization measurements using a superconducting quantum interference device magnetometer (SQUID) at room temperature. In MFM, the ferromagnetic signals have been detected specifically at line defects of the graphite surface. The magnetic moments in these defects pointed out of the graphite surface. SQUID magnetization measurements in HOPG revealed anisotropic ferromagnetic-like hysteresis loops at both 5 K and 300 K. The saturation magnetization reached 1 × 10-2 emu/g along the basal plane of graphite, while it was an order of magnitude smaller in the direction parallel to graphene planes. Magnetic impurities have been excluded as the origin of the magnetic signal after careful analysis, supporting an intrinsic magnetic behavior of carbon-based materials. The observed ferromagnetism has been attributed to originate from unpaired sp- electron spins, localized at defects sites of grain boundaries. It was pointed out that the structure of defects within grain boundaries cause sublattice unbalance, which is a sufficient condition for formation of local magnetic moments in graphene lattice according to Lieb’s theorem. Because of the unique structure of grain boundaries, defects are formed on the same sublattice and therefore the magnetic coupling between the magnetic moments is always ferromagnetic. The ferromagnetism in graphite sustains unexpectedly high temperatures, where the Curie temperature is well above room temperature. Such a high Curie temperature could be explained on the basis of the 2D anisotropic Heisenberg model using self-consistent spin-wave theories, which gave rise to TC = 764 K. In the future, a controlled way of producing defects in graphite could lead to production of light and high temperature carbon ferromagnets. Moreover, grain boundaries in graphite can find applications in the field of spintronics as spin-polarized guides. Chapter 4 is devoted to a single layer of graphite, graphene, grown on SiC(0001). Graphene has shown a number of unexpected physical properties in the last years, which makes it a promising candidate for future electronic devices. Graphene possess a high quality two dimensional electron gas with extremely high mobility at room temperature, where charge carriers can be tuned between electrons and holes by gate. The system of graphene on SiC seems to be the most interesting platform for application purposes and for large scale production. However, the quality of the 2D electron gas in graphene on SiC is much lower than for a free standing graphene or graphene supported on SiO2 substrates. For this reason, the main focus in this chapter was devoted to the understanding the influence of the SiC interface on the electronic properties of a graphene monolayer. The successful formation of a few-layer graphene (1-3) on SiC(0001) has been performed by a heating procedure in ultra high vacuum. The resulting graphene layers have been studied by scanning tunneling microscopy (STM) and spectroscopy (STS). STM topography and STS measurements have shown that a single graphene layer grown on a SiC(0001) substrate is still affected by the electronic structure of the interface layer of SiC. The graphene monolayer demonstrated transparency at bias voltages > 100 mV in STM. At these voltages, localized states belonging to the underlying interface layer were observed on the first graphene layer. Inelastic electron tunneling spectroscopy (IETS) has revealed an extremely strong inelastic phonon contribution for the out of plane acoustic phonon (70 meV) of graphene, reaching a gigantic 50% intensity of the IETS peaks. This inelastic contribution has been enhanced particularly on the places with localized electron states of the interface layer. Surprisingly, STS spectra on single layer graphene have shown a gap-like feature at the Fermi level, which was pinned between the inelastic phonon contributions at ±70 meV. This gap-like feature is probably due to charge modulations from graphene electrons interacting with localized interlayer electron states, indicating that electron correlation effects play an important role for the charge carrier behavior at the Fermilevel. Undoped graphene is a semi-metal, but several ideas have been proposed how graphene can become superconducting by doping. Here is reported that a few layers of epitaxial grown graphene shows a transition to two-dimensional fluctuating superconductivity. The underlying mechanism is based on strong electron-phonon coupling between graphene electrons interacting with localized electron states formed at the SiC(0001) substrate/graphene interface and z- acoustic phonons of graphene. Finally, chapter 5 deals with curved graphene systems, fullerenes, for which a new wet deposition technique was successfully developed to produce ultra thin fullerene films. This technique could be especially useful for fullerene derivatives, which cannot sustain the high temperatures needed to evaporate these molecules in ultra high vacuum. It uses a special nebulizer to spray coat fullerenes dissolved in toluene or carbon disulfide onto a sample surface under ambient conditions. Spray coating of C60 has been successfully tested on graphite and gold surfaces. Monolayer thick C60 films have been formed on both surfaces at particular deposition parameters as confirmed by AFM and STM. The structural and electronic properties of spray coated C60 films on Au(111) have shown comparable results to thermally evaporated C60. The only difference was that solvent residues remained attached to the gold surface and could not be removed. However, the solvent residues have not modified the electronic structure of C60 on Au(111) in the case of CS2
Simulated Altitude Investigation of Stewart-Warner Model 906-B Combustion Heater
An investigation has been conducted to determine thermal and pressure-drop performance and the operational characteristics of a Stewart-Warner model 906-B combustion heater. The performance tests covered a range of ventilating-air flows from 500 to 3185 pounds per hour, combustion-air pressure drops from 5 to 35 inches of water, and pressure altitudes from sea level to 41,000 feet. The operational characteristics investigated were the combustion-air flows for sustained combustion and for consistent ignition covering fuel-air ratios ranging from 0.033 to 0.10 and pressure altitudes from sea level to 45,000 feet. Rated heat output of 50,000 Btu per hour was obtained at pressure altitudes up to 27,000 feet for ventilating-air flows greater than 800 pounds per hour; rated output was not obtained at ventilating-air flow below 800 pounds per hour at any altitude. The maximum heater efficiency was found to be 60.7 percent at a fuel-air ratio of 0.050, a sea-level pressure altitude, a ventilating-air temperature of 0 F, combustion-air temperature of 14 F, a ventilating-air flow of 690 pounds per hour, and a combustion-air flow of 72.7 pounds per hour. The minimum combustion-air flow for sustained combustion at a pressure altitude of 25,000 feet was about 9 pounds per hour for fuel-air ratios between 0.037 and 0.099 and at a pressure altitude of 45,000 feet increased to 18 pounds per hour at a fuel-air ratio of 0.099 and 55 pounds per hour at a fuel-air ratio of 0.036. Combustion could be sustained at combustion-air flows above values of practical interest. The maximum flow was limited, however, by excessively high exhaust-gas temperature or high pressure drop. Both maximum and minimum combustion-air flows for consistent ignition decrease with increasing pressure altitude and the two curves intersect at a pressure altitude of approximately 25,000 feet and a combustion-air flow of approximately 28 pounds per hour
Effect of inlet-air parameters on combustion limit and flame length in 8-inch-diameter ram-jet combustion chamber
EVALUATION OF THERMAL AND MECHANICAL PROPERTIES OF DEMONSTRATION WALL UTILIZING PHASE CHANGE CEMENTITIOUS MATERIALS
International project PoroPCM involves partners from Germany, Czech Republic, Spain and Japan with the objective to develop new multifunctional Phase Change Materials modified porous cementitious nanocomposite (PoroPCM). Such material can be utilized for storing heat energy in the insulation layer of buildings compared to commonly used insulation materials since the phase change increases heat capacity. This enhanced feature reduces the amount of energy necessary for running the heating/cooling system. For the testing of the newly developed phase change cementitious composite a demonstration wall will be developed and tested for its thermal as well as mechanical performance. The topic of the paper is the description of the properties of the new phase change cementitious nanocomposite. The main emphasis of the paper is the description of the demonstration wall behaviour under typical environmental conditions. The wall design is supported by numerical simulation of the wall physical parameters. The numerical modelling involves the definition of suitable numerical models for the simulation of the thermal properties of the new phase change nanocomposite. The numerical model is then used to demonstrate the performance of the wall layer design. The presented pilot results show efficiency increase of the insulation material in the range 15–70%. Also modelling of wind resistance of the layered structure is included. The developed wall design and PoroPCM material will be tested and verified by a large scale test in the final year of the project
- …