Reduced 30% scanning time 3D multiplexer integrated circuit applied to large array format 20KHZ frequency inkjet print heads

Enhancement of the number and array density of nozzles within an inkjet head chip is one of the keys to raise the printing speed and printing resolutions. However, traditional 2D architecture of driving circuits can not meet the requirement for high scanning speed and low data accessing points when nozzle numbers greater than 1000. This paper proposes a novel architecture of high-selection-speed three-dimensional data registration for inkjet applications. With the configuration of three-dimensional data registration, the number of data accessing points as well as the scanning lines can be greatly reduced for large array inkjet printheads with nozzles numbering more than 1000. This IC (Integrated Circuit) architecture involves three-dimensional multiplexing with the provision of a gating transistor for each ink firing resistor, where ink firing resistors are triggered only by the selection of their associated gating transistors. Three signals: selection (S), address (A), and power supply (P), are employed together to activate a nozzle for droplet ejection. The smart printhead controller has been designed by a 0.35 um CMOS process with a total circuit area, 2500 x 500 microm2, which is 80% of the cirucuit area by 2D configuration for 1000 nozzles. Experiment results demonstrate the functionality of the fabricated IC in operation, signal transmission and a potential to control more than 1000 nozzles with only 31 data access points and reduced 30% scanning time.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/EDA-Publishing

A 0.8 V T Network-Based 2.6 GHz Downconverter RFIC

A 2.6 GHz downconverter RFIC is designed and implemented using a 0.18 μm CMOS standard process. An important goal of the design is to achieve the high linearity that is required in WiMAX systems with a low supply voltage. A passive T phase-shift network is used as an RF input stage in a Gilbert cell to reduce supply voltage. A single supply voltage of 0.8 V is used with a power consumption of 5.87 mW. The T network-based downconverter achieves a conversion gain (CG) of 5 dB, a single-sideband noise figure (NF) of 16.16 dB, an RF-to-IF isolation of greater than 20 dB, and an input-referred third-order intercept point (IIP3) of 1 dBm when the LO power of -13 dBm is applied

Active Debris Removal and the Challenges for Environment Remediation

Recent modeling studies on the instability of the debris population in the low Earth orbit (LEO) region and the collision between Iridium 33 and Cosmos 2251 have underlined the need for active debris removal. A 2009 analysis by the NASA Orbital Debris Program Office shows that, in order to maintain the LEO debris population at a constant level for the next 200 years, an active debris removal of about five objects per year is needed. The targets identified for removal are those with the highest mass and collision probability products in the environment. Many of these objects are spent upper stages with masses ranging from 1 to more than 8 metric tons, residing in several altitude regions and concentrated in about 7 inclination bands. To remove five of those objects on a yearly basis, in a cost-effective manner, represents many challenges in technology development, engineering, and operations. This paper outlines the fundamental rationale for considering active debris removal and addresses the two possible objectives of the operations -- removing large debris to stabilize the environment and removing small debris to reduce the threat to operational spacecraft. Technological and engineering challenges associated with the two different objectives are also discussed

Migration of Interplanetary Dust

We numerically investigate the migration of dust particles with initial orbits close to those of the numbered asteroids, observed trans-Neptunian objects, and Comet Encke. The fraction of silicate asteroidal particles that collided with the Earth during their lifetime varied from 1.1% for 100 micron particles to 0.008% for 1 micron particles. Almost all asteroidal particles with diameter d>4 microns collided with the Sun. The peaks in the migrating asteroidal dust particles' semi-major axis distribution at the n:(n+1) resonances with Earth and Venus and the gaps associated with the 1:1 resonances with these planets are more pronounced for larger particles. The probability of collisions of cometary particles with the Earth is smaller than for asteroidal particles, and this difference is greater for larger particles.Comment: Annals of the New York Academy of Sciences, 15 pages, 8 Figures, submitte

USA Space Debris Environment, Operations, and Research Updates

No abstract availabl

An Analysis of the FY-1C, Iridium 33, and Cosmos 2251 Fragments

The beginning of the year 2013 marks the sixth anniversary of the destruction of the Fengyun-1C (FY-1C) weather satellite as the result of an anti-satellite test conducted by China in January 2007 and the fourth anniversary of the accidental collision between Cosmos 2251 and the operational Iridium 33 in February 2009. These two events represent the worst satellite breakups in history. A total of 5579 fragments have been cataloged by the U.S. Space Surveillance Network (SSN), and almost 5000 of them were still in orbit in January 2013. In addition to these cataloged objects, hundreds of thousands (or more) of fragments down to the millimeter size regime were also generated during the breakups. These fragments are too small to be tracked by the SSN, but are large enough to be a safety concern for human space activities and robotic missions in low Earth orbit (LEO, the region below 2000 km altitude). Like their cataloged siblings, many of them remain in orbit today. These two breakup events dramatically changed the landscape of the orbital debris environment in LEO. The spatial density of the cataloged population in January 2013 is shown as the top blue curve. The combined FY-1C, Iridium 33, and Cosmos 2251 fragments (black curve) account for about 50 percent of the cataloged population below an altitude of 1000 km. They are also responsible for the concentrations at 770 km and 850 km, altitudes at which the collisions occurred. The effects of the FY-1C, Iridium 33, and Cosmos 2251 fragments will continue to be felt for decades to come. For example, approximately half of the generated FY-1C fragments will remain in orbit 20 years from now. In general, the Iridium 33 and Cosmos 2251 fragments will decay faster than the FY-1C fragments because of their lower altitudes. Of the Iridium 33 and Cosmos 2251 fragments, the former have much shorter orbital lifetimes than the latter, because lightweight composite materials were heavily used in the construction of the Iridium vehicle, leading to the higher area-to-mass ratios of the fragments

Orbital Debris Environment - Now and the Future

No abstract availabl

An Update on the Effectiveness of Postmission Disposal in LEO

The commonlyadopted orbital debris mitigation measures were developed to reduce the growth of the future debris population. A major component in debris mitigation is post-mission disposal (PMD). The key PMD element for LEO satellites is the 25year rule. It is intended to limit the longterm presence of rocket bodies (R/Bs) and spacecraft (S/C), as well as mission-related debris, in the environment. The effectiveness of PMD has been demonstrated and documented since the development of mitigation measures began in the 1990s. This paper summarizes an updated study, based on the current environment, using the NASA LEGEND model. The study focused on the > or = 10 cm population in LEO. The historical simulation covered 1957 through 2011 and followed the recorded launches and known breakup events. The future projection was carried out for 200 years. An eightyear launch traffic, 2004 - 2011, was repeated during the projection period. An eightyear mission lifetime was assumed for future S/C. No stationkeeping and no collision avoidance maneuver were implemented. Only objects 10 cm and larger were included in collision consideration. No explosion was allowed for R/Bs and S/C launched after 2011. The 25year PMD rule success rates were set at 0%, 10%, 50%, 75%, and 95%, respectively, for the 5 study scenarios. Results of the simulations were analyzed to quantify the differences among the different compliance rates. As expected, the 0% PMD projection followed a rapid and nonlinear increase in the next 200 years. The LEO population, on average, more than tripled at the end of the simulations. With a 50% compliance of the 25year rule, the population growth was reduced approximately by half. However, even with a 95% compliance of the 25year rule, the LEO debris population would still increase by an average of more than 50% in 200 years. These simulation results provide an updated assessment of the effectiveness of the 25year rule. It is the first and the most costeffective defense against future population growth. In addition, the results also confirm the instability of the LEO population and lay the foundation for the need to consider environment remediation in the future

Effectiveness of Satellite Postmission Disposal to Limit Orbital Debris Population Growth in Low Earth Orbit

No abstract availabl