106 research outputs found
A 4-degrees-of-freedom microrobot with nanometer resolution
A new type of microrobot is described. Its simple and compact design is believed to be of promise in the microrobotics field. Stepping motion allows speeds up to 4mm/s. Resolution smaller than 10 nm is achievable. Experiments in an open-loop motion demonstrated a repeatability better than 50”m on a 10 mm displacement at an average speed of 0.25 mm/s. A position feedback based on a microvision system will be developed in order to achieve a submicron absolute position accurac
An inâsitu indentation system for high dynamic nanomechanical measurements
Nanoindentation is typically confined to quasi-static strain rates of testing. This poster presents the development of an in-situ indenter designed to measure the response of materials at high strain rates and high oscillation frequencies at the nanoscale. This builds up on the previous work that was the first to report on in-situ nanoindentation in a SEM in 2004 which eventually resulted in the founding of the company Alemnis AG, today one of the key players in in-situ high temperature and high dynamic nanoindentation.
The motivation for variable strain rate studies is that this allows analysis of activation parameters of the physical deformation processes. Once the activation parameters are known, the deformation mechanism(s) can be determined and materials science approaches to improve materials performance can be developed. Ultra-high frequency nanoindentation enables high strain rate studies and high cycle fatigue tests that can be performed within reasonably short timespan.
Compared to other actuation principles, piezo actuators offers very fast response time and high force density and are compatible with vacuum environments. At the technological heart of this innovation is a transducer called âSmarTipâ consisting of a diamond tip mounted on miniaturized and embedded three-axis piezo-actuators and sensors. The SmarTip allows a full range displacement of 1ÎŒm along the three axes and to measure forces up to 1N. The theoretical bandwidths are up to 10kHz and 40kHz for lateral and axial displacements respectively. We aim to reach strain rates as high as 105s-1 meaning that the speed of displacement must reach 60mm/s for a displacement of 600nm. With such high ambitions, several parameters have to be taken into consideration such as resonant frequencies of the indenter, self-heating and cabling inducing spurious capacitance. This poster will report on these design aspects, instrumentation and technique development in addition to presenting initial data on high strain rate and high cycle fatigue tests at the micron scale. It is hoped that the multi-axis capabilities of the SmarTip will result in additional breakthroughs for applications on nano-tribology, fretting and more generally on the translation of dynamic mechanical analysis (DMA) to the micro/nanoscale.
Acknowledgments
Research work partially co-funded by the Commission for Technology and Innovation (CTI), the State Secretariat for Education, Research and the Innovation Eurostars program and project UHV
Pseudo-elastic Flexure-Hinges in Robots for Micro Assembly
The increasing tendency of products towards miniaturization makes the substitution of conventional hinges to flexure hinges necessary, since they can be manufactured almost arbitrarily small. On account of their multiple advantages like no backlash, no slip-stick-effects and no friction, their application is especially reasonable in high-precision robots for micro assembly.
Particular pseudo-elastic shape memory alloys offer themselves as material for flexure hinges. Since flexible joints gain their mobility exclusively via the elastic deformation of matter, the attainable angle of rotation is strongly limited when using conventional metallic materials with approximately 0.4% maximal elastic strain. Using pseudo-elastic materials, with up to 15% elastic strain, this serious disadvantage of flexure hinges can be avoided.
A further problem of flexible joints is their kinematic behavior since they do not behave exactly like conventional rotational joints. In order to examine the kinematics of the hinges an experimental set-up was developed whereby good compliance with theoretical computed values could be achieved. A three (+1) degree of freedom parallel robot with integrated flexure hinges is investigated showing its kinematic deviations to its rigid body model. The data of the kinematic model of the flexible joint can then be implemented into the control of this compliant mechanism in order to gain not only a higher repeatability but also a good absolute accuracy over the entire working space
Comparison of nanoindentation results obtained with Berkovich and cube-corner indenters
There is increasing interest in using sharp cube corner indenters in nanoindentation
experiments to study plastic properties. In combination with finite element methods it is for
instance possible to extract stress-strain curves from load-displacement curves measured with
differently shaped pyramidal indenters. Another example is the fracture toughness of
coatings, which can be studied using cracks produced during indentation with cube corner
tips. We have carried out indentation experiments with Berkovich and cube corner indenters
on eight different materials with different mechanical properties. To gain information about
the formation of pile-up and cracks, indentation experiments with cube corner indenter were
performed inside a Scanning Electron Microscope (SEM) using a custom-built SEMMicroindenter.
The results show that reliable hardness and modulus values can be measured
using cube corner indenters. However, the fit range of the unloading curve has a much bigger
influence on the results for the cube corner than for the Berkovich tip. The unloading curves
of a cube corner measurement should therefore be carefully inspected to determine the region
of smooth curvature and the unloading fit range chosen warily. Comparison of the modulus
results shows that there is no significant difference between cube corner and Berkovich
measurements. Also for hardness, no fundamental difference is observed for most of the
investigated materials. Exceptions are materials like silicon nitride, cemented carbide or
glassy carbon, where a clear difference to the hardness reference value has been observed
although the modulus difference is not pronounced
Compliant parallel robot with 6 DOF
In this paper a patented parallel structure1 will be presented in which conventional bearings are replaced by flexure hinges made of pseudo-elastic shape memory alloy. The robot has six degrees of freedom and was developed for micro assembly tasks. Laboratory tests made with the robot using conventional bearings have shown that the repeatability was only a couple of 1/100 mm instead of the theoretical resolution of the platform of < 1 pm. Especially the slip-stick effects of the bearings decreased the positional accuracy. Because flexure hinges gam their mobility only by a deformation of matter, no backlash, friction and slip-stick-effects exist in flexure hinges. For this reason the repeatability of robots can be increased by using flexure hinges. Joints with different degrees of freedom had to be replaced in the structure. This has been done by a combination of flexure hinges with one rotational degree of freedom. FEM simulations for different designs of the hinges have been made to calculate the possible maximal angular deflections. The assumed maximal deflection of 20° of the hinges restricts the workspace of the robot to 28x28 mm with no additional rotation of the working platform. The deviations between the kinematic behavior of the compliant parallel mechanism and its rigid body model can be simulated with the FEM
Generation of different Bell states within the SPDC phase-matching bandwidth
We study the frequency-angular lineshape for a phase-matched nonlinear
process producing entangled states and show that there is a continuous variety
of maximally-entangled states generated for different mismatch values within
the natural bandwidth. Detailed considerations are made for two specific
methods of polarization entanglement preparation, based on type-II spontaneous
parametric down-conversion (SPDC) and on SPDC in two subsequent type-I crystals
producing orthogonally polarized photon pairs. It turns out that different Bell
states are produced at the center of the SPDC line and on its slopes,
corresponding to about half-maximum intensity level. These Bell states can be
filtered out by either frequency selection or angular selection, or both. Our
theoretical calculations are confirmed by a series of experiments, performed
for the two above-mentioned schemes of producing polarization-entangled photon
pairs and with two kinds of measurements: frequency-selective and
angular-selective.Comment: submitted for publicatio
Some recent advances in nanomechanical testing: High strain rates, variable temperatures, fatigue and stress relaxation, combinatorial experimentation
In the first part of the talk, I will present two recently developed platforms for high temperature nanomechanical testing. The first platform allows for variable temperature and variable strain rate testing of micropillars in situ in the scanning electron microscope. By utilizing an intrinsically displacement-controlled micro-compression setup, which applies displacement using a miniaturized piezo-actuator, weâve recently extended the attainable range of strain rates to up to~ 103 sâ1, and enabled cyclic loading up to 107 cycles and load relaxation tests. Stable, variable temperature indentation/micro-compression in the range of -45°C to 600°C is achieved through independent heating and temperature monitoring of both the indenter tip and sample and by cooling the instrument frame. A second system allows for measurements at lower loads ex-situ in a dedicated vacuum chamber in the range of -150 °C to 700 °C. The cryo temperature is achieved by means of a liquid nitrogen line, while the high temperature is generated by three independent heat sources for the sample and the two tips of the differential displacement measurement system, establishing an infrared bath in the measurement area.
In the second part several case studies will be presented. Using these new capabilities, we examine the plasticity of electrodeposited nanocrystalline Nickel, of combinatorial thin film libraries, of hard nanocrystalline ceramic thin films. Activation parameters such as activation volume and activation energy were determined and discussed in view of the most probable deformation mechanism. High strain rates and cyclic fatigue tests were performed on nanocrystalline Ni. The strain rate sensitivity seems to increase for strain rates higher than 10 s-1 suggesting a change in deformation mechanism with increasing strain rate. Cyclic fatigue tests up to 1 million cycles were performed on nanocrystalline Ni microbeams and compared with existing data from literature. Combinatorial libraries of bulk metallic glasses were synthesized by a combination of gradient sputtering and evaporation. Hardness and Youngâs modulus was mapped as a function of temperate, strain rate and composition. The results are discussed in the light of shear band kinetics.
Finally, a wide range of chromium nitride-based hard coatings was investigated using in situ micro-cantilever bending and compression testing. This allowed the first direct measurement of the high temperature compressive strength and fracture toughness
A new dynamic module for in-situ nanomechanical testing at high strain rate
In-situ nanomechanical testing is commonly used to probe surface mechanical properties of bulk materials or thin films, like hardness, Youngâs modulus, Yield stressâŠActually most of the instruments can measure these properties only statically, i.e. a low frequency, leading to property measurement only at low strain rate (usually 10-1s-1 by nanoindentation). This is mainly caused by the low resonance frequency of the system, preventing making tests at higher speed. Performing high dynamic measurements could bring new information on materials properties like deformation mechanism at high strain rate, or high dynamic fatigue properties.
A new high dynamic module usable for in-situ mechanical testing has been developed. It is composed of a small piezotube attached directly behind the tip. Because of the small dimensions of the module, his resonance frequency is very high (higher than 50kHz) in comparison to classical nanomechanical testers, permitting to perform and measure precisely the signals at very high frequency. Moreover, it can be used as a sensor and as an actuator, in x, y and z directions which gives to this module a very large range of measurements.
Firstly, the characteristics, the performances and the limits of the new high dynamic module will be presented. Secondly some indentations experiments performed at high strain rate on nanocrystalline nickel with the in-situ nanomechanical tester (Alemnis Gmbh) equipped with the high dynamic will be presented and discussed (Fig. 1). Finally, some micropillar compression at high strain rate on the same material will be described and discussed
- âŠ