Microbial analysis of leafy vegetables in iceless cooling facility

Against the background that leafy vegetables stored under ambient conditions are influenced by environmental factors which may cause significant quality loss in terms of freshness, colour, texture and composition, the iceless cooler was used to evaluate microbial load of leafy vegetables. The samples were evaluated for bacterial (coliforms and mesophiles) and fungal (mold and yeast) loads. Results of the microbial test showed that Corchorus olitorius had highest mean microbial load with plate count of 6.7 x 104 CFU/g and Hibiscus sabdariffa had the least mean microbial load with plate count of 4.8 x 104 CFU/g after five days of storage. Corchorus olitorius show a significant increase of Escherichia coli, Staphylococcus aureus and Streptococci species after five days of storage. The ANOVA results showed that vegetables stored under ambient conditions were significantly different (p˂0.01) from those stored in the iceless cooler. The results also indicate that Amaranthus dubius recorded the highest mean weight of 1.94kg and maintained its freshness and colour for up to three days compared with Corchorus olitorius with the least weight of 1.84kg

Using highly variable warfarin dosing to identify patients at risk for adverse events

<p>Abstract</p> <p>Background</p> <p>Patients who receive highly variable doses of warfarin may be at risk for poor anticoagulation control and adverse events. However, we lack a system to identify patients with the highest dose variability. Our objectives were to develop a scoring system to identify patients with high dose variability, and to validate this new measure by demonstrating that patients so identified have poor anticoagulation control and higher rates of adverse events (criterion validity).</p> <p>Methods</p> <p>We used a database of over 4, 000 patients who received oral anticoagulation in community practice between 2000-2002. We reviewed the charts of 168 patients with large warfarin dose variation and agreed on 18 risk factor definitions for high dose variability. We identified 109 patients with the highest dose variability (cases), as measured by coefficient of variation (CoV, SD/mean). We matched each case to two controls with low dose variability. Then, we examined all 327 charts, blinded to case/control status, to identify the presence or absence of the 18 risk factors for dose variability. We performed a multivariable analysis to identify independent predictors of high CoV. We also compared anticoagulation control, as measured by percent time in therapeutic range (TTR), and rates of adverse events between groups.</p> <p>Results</p> <p>CoV corresponded with other measures of anticoagulation control. TTR was 53% among cases and 79% among controls (p < 0.001). CoV also predicted adverse events. Six cases experienced a major hemorrhage versus 1 control (p < 0.001) and 3 cases had a thromboembolic event versus 0 control patients (p = 0.04). Independent predictors of high dose variability included hospitalization (OR = 21.3), decreased oral intake (OR = 12.2), use of systemic steroids (OR = 6.1), acetaminophen (OR = 4.0) and antibiotics (OR = 2.7; p < 0.05 for all).</p> <p>Conclusion</p> <p>CoV can be used to identify patients at risk for poor anticoagulation control and adverse events. This new measure has the potential to identify patients at high risk before they suffer adverse events.</p

Results on Total and Elastic Cross Sections in Proton–Proton Collisions at √s = 200 GeV

We report results on the total and elastic cross sections in proton-proton collisions at √s = 200 GeV obtained with the Roman Pot setup of the STAR experiment at the Relativistic Heavy Ion Collider (RHIC). The elastic differential cross section was measured in the squared four-momentum transfer range 0.045 ≤ −t ≤ 0.135 GeV². The value of the exponential slope parameter B of the elastic differential cross section dσ/dt ∼ e−Bt in the measured −t range was found to be B = 14.32 ± 0.09 (stat.)+0.13−0.28(syst.) GeV⁻². The total cross section σtot, obtained from extrapolation of the dσ/dt to the optical point at −t = 0, is σtot = 54.67 ± 0.21(stat.)+1.28−1.38(syst.) mb. We also present the values of the elastic cross section σel = 10.85±0.03 (stat.)+0.49−0.41 (syst.) mb, the elastic cross section integrated within the STAR t-range σeldet = 4.05 ± 0.01(stat.)−0.17+0.18(syst.) mb, and the inelastic cross section σinel= 43.82 ± 0.21(stat.)−1.44+1.37(syst.) mb. The results are compared with the world data

Multi-Disciplinary Hands-On Desktop Learning Modules and Modern Pedagogies

Our team’s research focuses on fundamental problems in undergraduate education in terms of how to expand use of well researched, yet still “new”, teaching pedagogies of ‘sensing’ or ‘hands-on’, ‘active’ and ‘problem-based learning’ within engineering courses. It is now widely accepted that traditional lectures ARE NOT best for students – yet that is what the community almost universally does. To address this issue we are developing new Desktop Learning Modules (DLMs) that contain miniaturized processes with a uniquely expandable electronic system to contend with known sensor systems/removable cartridges, as well as, unknown expansions to the project. We have shown that miniaturized mimics of industrial-scale equipment produce process data that agree with correlations developed for large-scale equipment. We are now adapting concepts shown efficacious in a single chemical engineering course to a variety of engineering classes within civil, mechanical, bio- and electrical engineering. Some examples of new hands-on learning applications in chemical engineering include a boiler / condenser and evaporative and shell & tube heat exchangers. In bioengineering, we are developing prognostic devices for separating Prostate Cancer Tumor Cells (PCTCs) from blood, sensing for the presence of PCTCs, a thermoregulation simulated limb cartridge for studying kinematics of heat flow and heat distribution in human extremities, and immunoaffinity neuron-like ion selective electrodes. In civil engineering, the DLMs illustrate open channel flow units and a solar powered Rankine cycle is underway in mechanical engineering. We are implementing DLMs along with team learning pedagogy. In this paper we will present technical aspects surrounding development of a large number of new learning cartridges. While the assessment strategies being developed are broadly applicable we will just present one instance, with the civil engineering cartridge, of the identification of misconceptions and experimental design for assessing the impact of the DLM on learning. The assessment includes a pre- and post-test assessment to determine improvement in understanding basic concepts and persistence and/or repair of misconceptions

From Current to Constituent Quarks: a Renormalization Group Improved Hamiltonian-based Description of Hadrons

A model which combines the perturbative behavior of QCD with low energy phenomenology in a unified framework is developed. This is achieved by applying a similarity transformation to the QCD Hamiltonian which removes interactions between the ultraviolet cutoff and an arbitrary lower scale. Iteration then yields a renormalization group improved effective Hamiltonian at the hadronic energy scale. The procedure preserves the standard ultraviolet behavior of QCD. Furthermore, the Hamiltonian evolves smoothly to a phenomenological low energy behavior below the hadronic scale. This method has the benefit of allowing radiative corrections to be directly incorporated into nonperturbative many-body techniques. It is applied to Coulomb gauge QCD supplemented with a low energy linear confinement interaction. A nontrivial vacuum is included in the analysis via a Bogoliubov-Valatin transformation. Finally, the formalism is applied to the vacuum gap equation, the quark condensate, and the dynamical quark mass.Comment: 36 pages, RevTeX, 5 ps figures include

Increasing delirium skills at the front door : results from a repeated survey on delirium knowledge and attitudes

© The Author 2016. Published by Oxford University Press on behalf of the British Geriatrics Society. All rights reserved. For Permissions, please email: [email protected] reviewedPostprin