Preparation and optimization of macroalgae-derived solid acid catalysts

Solid acid catalysts were synthesized from macroalgae Sargassum horneri via hydrothermal carbonization followed by sulfuric acid sulfonation. A three-variable Box-Behnken design and optimization was used to maximize surface acidity. The optimal preparation conditions were found to be at the carbonization temperature of 217 °C, the carbonization time of 4.6 h and the sulfonation temperature of 108.5 °C. Under these conditions, the highest surface acidity achieved was 1.62 mmol g−1. Physical and chemical properties of prepared solid acid catalyst were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared (FTIR) spectroscopy, and elemental analysis. The results proved the grafting of –SO3H groups on an amorphous carbon structure. The catalyst activity was evaluated by the esterification of oleic acid with methanol. The sample prepared achieved 96.6% esterification yield, which was higher than the 86.7% yield achieved by commercial Ambersyst-15 under the same reaction conditions

Annealing study and thermal investigation on bismuth sulfide thin films prepared by chemical bath deposition in basic medium

This is a post-peer-review, pre-copyedit version of an article published in Applied Physics A 124.2 (2018): 166. The final authenticated version is available online at: http://doi.org/10.1007/s00339-018-1584-7Bismuth sulfide thin films were prepared by chemical bath deposition using thiourea as sulfide ion source in basic medium. First, the effects of both the deposition parameters on films growth as well as the annealing effect under argon and sulfur atmosphere on as-deposited thin films were studied. The parameters were found to be influential using the Doehlert matrix experimental design methodology. Ranges for a maximum surface mass of films (3 mg cm-2) were determined. A well crystallized major phase of bismuth sulfide with stoichiometric composition was achieved at 190°C for 3 hours. The prepared thin films were characterized using Grazing Incidence X-ray diffraction (GIXRD), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray analysis (EDX). Second, the band gap energy value was found to be 1.5 eV. Finally, the thermal properties have been studied for the first time by means of the electropyroelectric (EPE) technique. Indeed, the thermal conductivity varied in the range of 1.20 - 0.60 W m-1 K-1 while the thermal diffusivity values increased in terms of the annealing effect ranging from 1.8 to 3.5 10-7 m2s-1This work was financially supported by the Tunisian Ministry of Higher Education and Scientific Research and by the WINCOST (ENE2016-80788-C5-2-R) project funded by the Spanish Ministry of Economy and Competitivenes