2,127 research outputs found
Interaction between superconductor and ferromagnetic domains in iron sheath: peak effect in MgB2/Fe wires
Interaction between the superconductor and ferromagnet in MgB2/Fe wires
results in either a plateau or a peak effect in the field dependence of
transport critical current, Ic(H). This is in addition to magnetic shielding of
external field. Current theoretical models cannot account for the observed peak
effect in Ic(H). This paper shows that the theoretical explanation of the peak
effect should be sought in terms of interaction between superconductor and
magnetic domain structure, obtained after re-magnetization of the iron sheath
by the self-field of the current. There is a minimum value of critical current,
below which the re-magnetization of the iron sheath and peak effect in Ic(H)
are not observed
Effect of carbon nanotube doping on critical current density of MgB2 superconductor
The effect of doping MgB2 with carbon nanotubes on transition temperature,
lattice parameters, critical current density and flux pinning was studied for
MgB2-xCx with x = 0, 0.05, 0.1, 0.2 and 0.3. The carbon substitution for B was
found to enhance Jc in magnetic fields but depress Tc. The depression of Tc,
which is caused by the carbon substitution for B, increases with increasing
doping level, sintering temperature and duration. By controlling the extent of
the substitution and addition of carbon nanotubes we can achieve the optimal
improvement on critical current density and flux pinning in magnetic fields
while maintaining the minimum reduction in Tc. Under these conditions, Jc was
enhanced by two orders of magnitude at 8T and 5K and 7T and 10K. Jc was more
than 10,000A/cm2 at 20K and 4T and 5K and 8.5T, respectively
Agency problems and capital expenditure announcements
This article examines the market valuation of announcements of new capital expenditure. Prior research suggests that the firm's growth opportunities and cash flow position condition the market response. This study jointly examines the role of growth and cash flow, and the interaction between them. Using a new data set of Australian firms that avoids problems associated with expectations models, the results are remarkably strong and support a positive association between growth opportunities and the market valuation, in addition to supporting the role of free cash flow. The findings have implications for the relationship between general investment information and stock prices
On the modelling of population balance in isothermal vertical bubbly flows - average bubble number density approach
To model the spatial evolution of the geometrical structure of the gas bubbles in isothermal vertical bubbly flow conditions, the population balance approach has been employed and merged with the three-dimensional two-fluid model. The population balance is realized by incorporating an average bubble number density transport equation into a commercial computational fluid dynamics (CFD)codeANSYS CFX 10. The coalescence and breakage effects of the gas bubbles are formulated according to the bubble coalescence by random collision driven by turbulence and wake entrainment while for bubble breakage by the impact of turbulent eddies. Three models representing these coalescence and breakage mechanisms proposed by Wu et al. [1], Hibiki and Ishii [2] and Yao and Morel [3] are assessed. Local radial distributions of the five primitive variables in bubbly flows: void fraction, Sauter mean diameter, interfacial area concentration, and gas and liquid velocities, are compared with two experimental data of Liu and Bankoff [4,5] and Hibiki et al. [6]. Close agreements between the predictions and measurements demonstrated the capability of the average bubble number density transport equation in modelling bubbly flow conditions
Methods to select areas to survey for biological control agents: An example based on growth in relation to temperature and distribution of the weed Conyza bonariensis
A novel approach for selecting areas to survey for biological control agents, incorporating climate and a hypothesised biological control agent, is demonstrated using the target weed Conyza bonariensis (Asteraceae). This weed has become important in Australian cropping regions due to its persistence and herbicide resistance, and it is also increasingly an environmental weed. Both are reasons for the investigation of biological control options. We developed a species niche model for C. bonariensis in CLIMEX based on parameters informed by plant growth and distribution of the species in the Americas. A hypothetical biological control agent (HBCA-cold) was proposed that has its ideal growth range 5 °C below that of the weed, so as to favour development of the agent over that of the weed in parts of Australia. The southern part of the weed's native distribution in Argentina, Chile and the highlands of Ecuador and Columbia were identified as the most suitable areas for surveys that take into account both the climate suitable for the HBCA-cold and the target regions in Australia. This was compared to a model (HBCA-hot) that had an ideal growth range 5 °C above that of the weed, but which identified potential areas for surveys in South America that were not climatically aligned with the main regions of the weed's economic impact in Australia. This species distribution modelling method allows for prioritisation of search areas for biological control agents in the case of widespread target species such as C. bonariensis. © 2016 Published by Elsevier Inc
Potential distribution of Rapistrum rugosum (turnip weed)
Rapistrum rugosum (L.) All. (Brassicaceae) is a widely distributed weed of annual crops, especially pulses, in southern Australia. With the south-west of Western Australia predicted to become drier and hotter due to climate change, the development of predictive models to determine future weed threats to the agricultural industry is essential for early intervention and to enable adaptation measures to be put in place. We measured the plant’s growth in relation to temperature and used this information along with soil moisture and phenology information based on the known distribution to derive growth parameters to develop a CLIMEX model. Under a warming climateR. rugosum is projected to increase its distribution in the northern hemisphere, but to decrease its distribution in Australia
Modelling horizontal gas-liquid flow using averaged bubble number density approach
In this study, the internal phase distributions of gas-liquid bubbly flow in a horizontal pipe have been predicted using the population balance model based on Average Bubble Number Density approach. Four flow conditions with average gas volume fraction ranging from 4.4% to 20% have been investigated. Predicted local radial distributions of void fraction, interfacial area concentration and gas velocity have been validated against the experimental data. In general, satisfactory agreements between predicted results and measured values have been achieved. For high superficial gas velocity, it has been ascertained that peak local void fraction of 0.7 with interfacial area concentration of 800 m-1 can be encountered near the top wall of the pipe. Some discrepancies have nonetheless been found between the numerical and experimental results at certain locations of the pipe. The insufficient resolution of the turbulent model in fully accommodating the strong turbulence in the current pipe orientation and the inclusion of additional interfacial force such as the prevalent bouncing force among bubbles remain some of the outstanding challenging issues need to be addressed in order to improve the prediction of horizontal gas-liquid bubbly flow
A study of drag force in isothermal bubbly flow
Driven by the extensive demands of simulating highly concentrated gas bubbly flows in many engineering fields, numerical studies have been performed to investigate the neighbouring effect of a swarm of bubbles on the interfacial drag forces. In this study, a novel drag coefficient correlation (Simonnet et al., 2007) in terms of local void fraction coupled with the population balance model based on average bubble number density (ABND) has been implemented and compared with Ishii-Zuber densely distributed fluid particles drag model. The predicted local radial distributions of three primitive variables: gas void fraction, Sauter mean bubble diameter, and gas velocity, are validated against the experimental data of Hibiki et al. (2001). In general, satisfactory agreements between predicted and measured results are achieved by both drag force models. With additional consideration for closely packed bubbles, the latest coefficient model by Simonnet et al. (2007) shows considerably better performance in capturing the reduction of drag forces incurred by neighbouring bubbles
Surface induced selective delamination of amphiphilic ABA block copolymer thin films
This is the result of an ongoing collaboration with Dr. N. Sommerdijk’s Biomaterials group at the University of Eindhoven (the Netherlands) and illustrates the close collaboration that exists in pursuing the design and application of novel polymeric materials between the two groups. This details work on a physical phenomenon (selective delamination) and key materials (amphiphilic block copolymers) that have subsequently been applied in the design of novel biomaterials. These results have appeared in a larger body of work including Advanced Materials, Angewandtie Chemie International Edition and the Journal of Materials Chemistry
- …