Sanitation of blackwater via sequential wetland and electrochemical treatment

The discharge of untreated septage is a major health hazard in countries that lack sewer systems and centralized sewage treatment. Small-scale, point-source treatment units are needed for water treatment and disinfection due to the distributed nature of this discharge, i.e., from single households or community toilets. In this study, a high-rate-wetland coupled with an electrochemical system was developed and demonstrated to treat septage at full scale. The full-scale wetland on average removed 79 +/- 2% chemical oxygen demand (COD), 30 +/- 5% total Kjeldahl nitrogen (TKN), 58 +/- 4% total ammoniacal nitrogen (TAN), and 78 +/- 4% orthophosphate. Pathogens such as coliforms were not fully removed after passage through the wetland. Therefore, the wetland effluent was subsequently treated with an electrochemical cell with a cation exchange membrane where the effluent first passed through the anodic chamber. This lead to in situ chlorine or other oxidant production under acidifying conditions. Upon a residence time of at least 6 h of this anodic effluent in a buffer tank, the fluid was sent through the cathodic chamber where pH neutralization occurred. Overall, the combined system removed 89 +/- 1% COD, 36 +/- 5% TKN, 70 +/- 2% TAN, and 87 +/- 2% ortho-phosphate. An average 5-log unit reduction in coliform was observed. The energy input for the integrated system was on average 16 +/- 3 kWh/m(3), and 11 kWh/m(3) under optimal conditions. Further research is required to optimize the system in terms of stability and energy consumption