Cyclic debonding of adhesive joints

Bonded lap joints were manufactured and tested under static and fatigue loading. Specimens were designed to fail in the bondline, and all fatigue tests included monitoring the crack growth to failure. Test specimens included aluminum details joined by two different adhesives. Specimens also included titanium and boron-epoxy details joined by an epoxy laminating resin. Additonal program variables included bondline thickness, adherend and spice plate thickness, specimen width, and specimen fabrication procedure. Adhesive aging was found to be generally detrimental to the lives of most of the specimens bonded with one adhesive system. Adhesive material was found to have a major influence on debond rate. Co-cured titanium/boron-epoxy specimens were found to resist debonding better than specimens fabricated with a sequential cure. Splice plate thickness and test section width were found to have little effect on debond rate. The data also suggested the existence of an optimum bondline thickness

Brown-Tail Moth, \u3ci\u3eEuproctis Chrysorrhoea,\u3c/i\u3e an Indigenous Pest of Parks and Public in the Benelux Countries (Lepidoptera: Lymantriidae)

Euproctis chrysorrhoea is a pest of park and shade trees and of the public in the Benelux countries as well as in the northeastern United States and Canada. In the Benelux countries the brown-tail moth is present every year in the dune regions, where it mainly feeds on Hippophae rhamnoides. Hairs from the larvae are irritating to the human skin producing a papular urticaria. An outbreak of the caterpillars produced widespread discomfort at a beach in the Netherlands in 1982 following defoliation of food plants and migration of the larvae seeking food, with resulting human contact, as well as wind dispersal of the hairs

Terminal sterilization process calculation for spacecraft

Mathematical model for calculating terminal sterilization process for interplanetary spacecraf

Determination of Terminal Sterilization Process Parameters

Time, temperature, and microbial effects on terminal heat sterilization of spacecraf

Pyrotechnic shock analysis and testing methods

Pyrotechnic shock analysis and testing methods for Ranger and Mariner spacecraft measurement

The aerospace technology laboratory (a perspective, then and now)

The physical changes that have taken place in aerospace facilities since the Wright brothers' accomplishment 78 years ago are highlighted. For illustrative purposes some of the technical facilities and operations of the NASA Lewis Research Center are described. These simulation facilities were designed to support research and technology studies in aerospace propulsion

A computer program for the calculation of the flow field in supersonic mixed-compression inlets at angle of attack using the three-dimensional method of characteristics with discrete shock wave fitting

The calculation procedure is based on the method of characteristics for steady three-dimensional flow. The bow shock wave and the internal shock wave system were computed using a discrete shock wave fitting procedure. The general structure of the computer program is discussed, and a brief description of each subroutine is given. All program input parameters are defined, and a brief discussion on interpretation of the output is provided. A number of sample cases, complete with data deck listings, are presented

Data assimilation insights on selecting the most valuable atmospheric measurements

We discuss how objective guidance on selecting the most valuable atmospheric measurements on future Mars spacecraft missions can be provided through already developed Martian atmospheric data assimilation systems, and in particular through Observing System Simulation Experiments (OSSEs) which are widely used to design instruments for the Earth’s atmosphere

Thermal energy storage for industrial waste heat recovery

The potential is examined for waste heat recovery and reuse through thermal energy storage in five specific industrial categories: (1) primary aluminum, (2) cement, (3) food processing, (4) paper and pulp, and (5) iron and steel. Preliminary results from Phase 1 feasibility studies suggest energy savings through fossil fuel displacement approaching 0.1 quad/yr in the 1985 period. Early implementation of recovery technologies with minimal development appears likely in the food processing and paper and pulp industries; development of the other three categories, though equally desirable, will probably require a greater investment in time and dollars