40,564 research outputs found
Development tests for the 2.5 megawatt Mod-2 wind turbine generator
The 2.5 megawatt MOD-2 wind turbine generator test program is discussed. The development of the 2.5 megawatt MOD-2 wind turbine generator included an extensive program of testing which encompassed verification of analytical procedures, component development, and integrated system verification. The test program was to assure achievement of the thirty year design operational life of the wind turbine system as well as to minimize costly design modifications which would otherwise have been required during on site system testing. Computer codes were modified, fatigue life of structure and dynamic components were verified, mechanical and electrical component and subsystems were functionally checked and modified where necessary to meet system specifications, and measured dynamic responses of coupled systems confirmed analytical predictions
Development of a flight software testing methodology
The research to develop a testing methodology for flight software is described. An experiment was conducted in using assertions to dynamically test digital flight control software. The experiment showed that 87% of typical errors introduced into the program would be detected by assertions. Detailed analysis of the test data showed that the number of assertions needed to detect those errors could be reduced to a minimal set. The analysis also revealed that the most effective assertions tested program parameters that provided greater indirect (collateral) testing of other parameters. In addition, a prototype watchdog task system was built to evaluate the effectiveness of executing assertions in parallel by using the multitasking features of Ada
Requirement for Slit-1 and Robo-2 in zonal segregation of olfactory sensory neuron axons in the main olfactory bulb
The formation of precise stereotypic connections in sensory systems is critical for the ability to detect and process signals from the environment. In the olfactory system, olfactory sensory neurons (OSNs) project axons to spatially defined glomeruli within the olfactory bulb (OB). A spatial relationship exists between the location of OSNs within the olfactory epithelium (OE) and their glomerular targets
along the dorsoventral axis in the OB. The molecular mechanisms underlying the zonal segregation of OSN axons along the dorsoventral axis of the OB are poorly understood. Using robo-2/ (roundabout) and slit-1/ mice, we examined the role of the Slit family of axon
guidance cues in the targeting of OSN axons during development. We show that a subset of OSN axons that normally project to the dorsal region of the OB mistarget and form glomeruli in the ventral region in robo-2/ and slit-1/ mice. In addition, we show that the Slit
receptor, Robo-2, is expressed in OSNs in a high dorsomedial to low ventrolateral gradient across the OE and that Slit-1 and Slit-3 are expressed in the ventral region of the OB. These results indicate that the dorsal-to-ventral segregation of OSN axons are not solely defined
by the location of OSNs within the OE but also relies on axon guidance cues
Holocene Sediment Magnetic Properties Along a Transect from Isafjardardjup to Djupall, Northwest Iceland
Holocene changes in terrestrial provenance and processes of sediment transport and deposition are tracked along a fjord-to-shelf transect adjacent to Vestfirdir, Iceland, using the magnetic properties ofmarine sediments.Magnetic susceptibility (MS) profiles of 10 cores (gravity and piston) were obtained onboard using a Bartington MS loop. Remanent magnetizations were measured at 1-cm intervals from u-channel samples taken from six cores on a cryogenic magnetometer. Between six and nine alternating field demagnetization steps were used to isolate the characteristic magnetization directions. The chronologies of the cores used in this study were determined from AMS14 C dates on mollusks and foraminifera and contrained by the regional occurrance ofthe 10,200 6 60 cal yr. BP Saksunavatn tepha. Correlative fluctuations in magneticconcentration are noted between the fjord and shelf sites, though these fluctuations are partiallymasked by regional variations in carbonate content. The onset of Neoglaciation is interpreted by changes in magnetic properties including an increase in mass magneticsusceptibility that began approximately 3000 cal yr. BP. The maximum angular deviation and the median destructive field (generally 20 mT) suggest that the natural remanent magnetization is carried by a coarse ferrimagnetite mineralogy, likely magnetite or titano-magnetite. Reproducible paleomagnetic inclination values are observed in several records, including a nearly vertical inclination around 8000 cal yr. BP, suggesting that the magnetic pole may have been proximal to Iceland, followed by an interval of much shallower inclination (6000–7000 cal yr. BP)
The Dust Properties of Eight Debris Disk Candidates as Determined by Submillimeter Photometry
The nature of far-infrared dust emission toward main sequence stars, whether
interstellar or circumstellar, can be deduced from submillimeter photometry. We
present JCMT/SCUBA flux measurements at 850 microns toward 8 stars with large
photospheric excesses at 60-100 microns. 5 sources were detected at 3-sigma or
greater significance and one was marginally detected at 2.5-sigma. The inferred
dust masses and temperatures range from 0.033 to 0.24 Earth masses and 43-65 K
respectively. The frequency behavior of the opacity, tau_nu ~ nu^beta, is
relatively shallow, beta < 1. These dust properties are characteristic of
circumstellar material, most likely the debris from planetesimal collisions.
The 2 non-detections have lower temperatures, 35-38 K and steeper opacity
indices, beta > 1.5, that are more typical of interstellar cirrus. The
confirmed disks all have inferred diameters > 2'', most lie near the upper
envelope of the debris disk mass distribution, and 4 are bright enough to be
feasible for high resolution imaging.Comment: accepted by Ap
A methodology for testing fault-tolerant software
A methodology for testing fault tolerant software is presented. There are problems associated with testing fault tolerant software because many errors are masked or corrected by voters, limiter, or automatic channel synchronization. This methodology illustrates how the same strategies used for testing fault tolerant hardware can be applied to testing fault tolerant software. For example, one strategy used in testing fault tolerant hardware is to disable the redundancy during testing. A similar testing strategy is proposed for software, namely, to move the major emphasis on testing earlier in the development cycle (before the redundancy is in place) thus reducing the possibility that undetected errors will be masked when limiters and voters are added
Containerless low gravity processing of glass forming and immiscible alloys
Under normal one-g conditions immiscible alloys segregate extensively during solidification due to sedimentation of the more dense of the immiscible liquid phases. Immiscible (hypermonotectic) gold-rhodium alloys were processed in the 100 meter drop tube under low gravity, containerless conditions to determine the feasibility of producing dispersed structures. Three alloy compositions were utilized. Alloys containing 10 percent by volume of the gold-rich hypermonotectic phase exhibited a tendency for the gold-rich liquid to wet the outer surface of the samples. This wetting tendency led to extensive segregation in several cases. Alloys containing 80 and 90 percent by volume of the gold-rich phase possessed completely different microstructures from the 10 percent samples when processed under low-g, containerless conditions. Several samples exhibited microstructures consisting of well dispersed 2 to 3 microns diameter rhodium-rich spheres in a gold-rich matrix
Executable assertions and flight software
Executable assertions are used to test flight control software. The techniques used for testing flight software; however, are different from the techniques used to test other kinds of software. This is because of the redundant nature of flight software. An experimental setup for testing flight software using executable assertions is described. Techniques for writing and using executable assertions to test flight software are presented. The error detection capability of assertions is studied and many examples of assertions are given. The issues of placement and complexity of assertions and the language features to support efficient use of assertions are discussed
- …