Spinally projecting preproglucagon axons preferentially innervate sympathetic preganglionic neurons

Glucagon-like peptide-1 (GLP-1) affects central autonomic neurons, including those controlling the cardiovascular system, thermogenesis, and energy balance. Preproglucagon (PPG) neurons, located mainly in the nucleus tractus solitarius (NTS) and medullary reticular formation, produce GLP-1. In transgenic mice expressing glucagon promoter-driven yellow fluorescent protein (YFP), these brainstem PPG neurons project to many central autonomic regions where GLP-1 receptors are expressed. The spinal cord also contains GLP-1 receptor mRNA but the distribution of spinal PPG axons is unknown. Here, we used two-color immunoperoxidase labeling to examine PPG innervation of spinal segments T1–S4 in YFP-PPG mice. Immunoreactivity for YFP identified spinal PPG axons and perikarya. We classified spinal neurons receiving PPG input by immunoreactivity for choline acetyltransferase (ChAT), nitric oxide synthase (NOS) and/or Fluorogold (FG) retrogradely transported from the peritoneal cavity. FG microinjected at T9 defined cell bodies that supplied spinal PPG innervation. The deep dorsal horn of lower lumbar cord contained YFP-immunoreactive neurons. Non-varicose, YFP-immunoreactive axons were prominent in the lateral funiculus, ventral white commissure and around the ventral median fissure. In T1–L2, varicose, YFP-containing axons closely apposed many ChAT-immunoreactive sympathetic preganglionic neurons (SPN) in the intermediolateral cell column (IML) and dorsal lamina X. In the sacral parasympathetic nucleus, about 10% of ChAT-immunoreactive preganglionic neurons received YFP appositions, as did occasional ChAT-positive motor neurons throughout the rostrocaudal extent of the ventral horn. YFP appositions also occurred on NOS-immunoreactive spinal interneurons and on spinal YFP-immunoreactive neurons. Injecting FG at T9 retrogradely labeled many YFP-PPG cell bodies in the medulla but none of the spinal YFP-immunoreactive neurons. These results show that brainstem PPG neurons innervate spinal autonomic and somatic motor neurons. The distributions of spinal PPG axons and spinal GLP-1 receptors correlate well. SPN receive the densest PPG innervation. Brainstem PPG neurons could directly modulate sympathetic outflow through their spinal inputs to SPN or interneurons

Formation and structural characterization of Ni nanoparticles embedded in SiO₂

Face-centered cubic Ni nanoparticles were formed in SiO₂ by ion implantation and thermal annealing. Small-angle x-ray scattering in conjunction with transmission electron microscopy was used to determine the nanoparticle size as a function of annealing temperature, whereas the local atomic structure was measured with x-ray absorption spectroscopy. The influence of finite-size effects on the nanoparticle structural properties was readily apparent and included a decrease in coordination number and bond length and an increase in structural disorder for decreasing nanoparticle size. Such results are consistent with the non-negligible surface-to-volume ratio characteristic of nanoparticles. In addition, temperature-dependent x-ray absorption spectroscopy measurements showed the mean vibrational frequency (as obtained from the Einstein temperature) decreased with decreasing nanoparticle size. This reduction was attributed to the greater influence of the loosely bound, under-coordinated surface atoms prevailing over the effects of capillary pressure, the former enhancing the low frequency modes of the vibrational density of statesThis work was financially supported by the Australian Synchrotron and the Australian Research Council with access to equipment provided by the Australian Nanofabrication Facility

Understanding Communication of Sustainability Reporting: Application of Symbolic Convergence Theory (SCT)

The purpose of this paper is to investigate the nature of rhetoric and rhetorical strategies that are implicit in the standalone sustainability reporting of the top 24 companies of the Fortune 500 Global. We adopt Bormann’s (Q J Speech 58(4):396–407, 1972) SCT framework to study the rhetorical situation and how corporate sustainability reporting (CSR) messages can be communicated to the audience (public). The SCT concepts in the sustainability reporting’s communication are subject to different types of legitimacy strategies that are used by corporations as a validity and legitimacy claim in the reports. A content analysis has been conducted and structural coding schemes have been developed based on the literature. The schemes are applied to the SCT model which recognizes the symbolic convergent processes of fantasy among communicators in a Society. The study reveals that most of the sample companies communicate fantasy type and rhetorical vision in their corporate sustainability reporting. However, the disclosure or messages are different across locations and other taxonomies of the SCT framework. This study contributes to the current CSR literature about how symbolic or fantasy understandings can be interpreted by the users. It also discusses the persuasion styles that are adopted by the companies for communication purposes. This study is the theoretical extension of the SCT. Researchers may be interested in further investigating other online communication paths, such as human rights reports and director’s reports

Extended x-ray absorption fine structure study of porous GaSb formed by ion implantation

Porous GaSb has been formed by Ga ion implantation into crystalline GaSb substrates at either room temperature or −180 °C. The morphology has been characterized using scanning electron microscopy and the atomic structure was determined using extended x-ray absorption fine structure spectroscopy. Room-temperature implantation at low fluences leads to the formation of ∼20-nm voids though the material remains crystalline. Higher fluences cause the microstructure to evolve into a network of amorphous GaSb rods ∼15 nm in diameter. In contrast, implantation at −180 °C generates large, elongated voids but no rods. Upon exposure to air, the surface of the porous material is readily oxidized yielding Ga₂O₃ and metallic Sb precipitates, the latter resulting from the reduction of unstable Sb₂O₃. We consider and discuss the atomic-scale mechanisms potentially operative during the concurrent crystalline-to-amorphous and continuous-to-porous transformations

Application for the 4W Model of Drowning for Prevention, Rescue and Treatment, Research and Education

Previous research has been published about the 4W model of drowning and its four constituent variables (Avramidis, Butterly & Llewellyn, 2007; 2009a; 2009b; 2009c; 2009d; Avramidis, McKenna, Long, Butterly, & Llewellyn, 2010). We presently summarize and suggest applications of the model for the general public, aquatic safety professionals, injury epidemiologists and policy makers

Simulation and observations of stratospheric aerosols from the 2009 Sarychev volcanic eruption

We used a general circulation model of Earth’s climate to conduct simulations of the 12-16 June 2009 eruption of Sarychev volcano (48.1°N, 153.2°E). The model simulates the formation and transport of the stratospheric sulfate aerosol cloud from the eruption and the resulting climate response. We compared optical depth results from these simulations with limb scatter measurements from the Optical Spectrograph and InfraRed Imaging System (OSIRIS), in situ measurements from balloon-borne instruments lofted from Laramie, Wyoming (41.3°N, 105.7°W), and five lidar stations located throughout the Northern Hemisphere. The aerosol cloud covered most of the Northern Hemisphere, extending slightly into the tropics, with peak backscatter measured between 12 and 16 km in altitude. Aerosol concentrations returned to near background levels by Spring, 2010. After accounting for expected sources of discrepancy between each of the data sources, the magnitudes and spatial distributions of aerosol optical depth due to the eruption largely agree. In conducting the simulations, we likely overestimated both particle size and the amount of SO2 injected into the stratosphere, resulting in modeled optical depth values that were a factor of 2-4 too high. Model results of optical depth due to the eruption show a peak too late in high latitudes and too early in low latitudes, suggesting a problem with stratospheric circulation in the model. The model also shows a higher annual decay rate in optical depth than is observed, showing an inaccuracy in seasonal deposition rates. The modeled deposition rate of sulfate aerosols from the Sarychev eruption is higher than the rate calculated for aerosols from the 1991 eruption of Mt. Pinatubo

Spacecraft ram glow and surface temperature

Space shuttle glow intensity measurements show large differences when the data from different missions are compared. In particular, on the 41-G mission the space shuttle ram glow was observed to display an unusually low intensity. Subsequent investigation of this measurement and earlier measurements suggest that there was a significant difference in temperature of the glow producing ram surfaces. The highly insulating properties coupled with the high emissivity of the shuttle tile results in surfaces that cool quickly when exposed to deep space on the night side of the orbit. The increased glow intensity is consistent with the hypothesis that the glow is emitted from excited NO2. The excited NO2 is likely formed through three body recombination (OI + NO + M = NO2*) where ramming of OI interacts with weakly surface bound NO. The NO is formed from atmospheric OI and NI which is scavenged by the spacecraft moving through the atmosphere. It is postulated that the colder surfaces retain a thicker layer of NO thereby increasing the probability of the reaction. It has been found from the glow intensity/temperature data that the bond energy of the surface bound precursor, leading to the chemical recombination producing the glow, is approximately 0.14 eV. A thermal analysis of material samples of STS-8 was made and the postulated temperature change of individual material samples prior to the time of glow measurements above respective samples are consistent with the thermal effect on glow found for the orbiter surface

Direct observation of irradiation-induced nanocavity shrinkage in Si

Nanocavities in Si substrates, formed by conventional H implantation and thermal annealing, are shown to evolve in size during subsequent Si irradiation. Both ex situ and in situ analytical techniques were used to demonstrate that the mean nanocavity diameter decreases as a function of Si irradiation dose in both the crystalline and amorphous phases. Potential mechanisms for this irradiation-induced nanocavity evolution are discussed. In the crystalline phase, the observed decrease in diameter is attributed to the gettering of interstitials. When the matrix surrounding the cavities is amorphized, cavity shrinkage may be mediated by one of two processes: nanocavities can supply vacancies into the amorphous phase and/or the amorphous phase may flow plastically into the nanocavities. Both processes yield the necessary decrease in density of the amorphous phase relative to crystalline material