3,026 research outputs found
A multimission three-axis stabilized spacecraft flight dynamics ground support system
The Multimission Three-Axis Stabilized Spacecraft (MTASS) Flight Dynamics Support System (FDSS) has been developed in an effort to minimize the costs of ground support systems. Unlike single-purpose ground support systems, which attempt to reduce costs by reusing software specifically developed for previous missions, the multimission support system is an intermediate step in the progression to a fully generalized mission support system in which numerous missions may be served by one general system. The benefits of multimission attitude ground support systems extend not only to the software design and coding process, but to the entire system environment, from specification through testing, simulation, operations, and maintenance. This paper reports the application of an MTASS FDSS to multiple scientific satellite missions. The satellites are the Upper Atmosphere Research Satellite (UARS), the Extreme Ultraviolet Explorer (EUVE), and the Solar Anomalous Magnetospheric Particle Explorer (SAMPEX). Both UARS and EUVE use the multimission modular spacecraft (MMS) concept. SAMPEX is part of the Small Explorer (SMEX) series and uses a much simpler set of attitude sensors. This paper centers on algorithm and design concepts for a multimission system and discusses flight experience from UARS
Mission planning, mission analysis and software formulation. Level C requirements for the shuttle mission control center orbital guidance software
The formulation of Level C requirements for guidance software was reported. Requirements for a PEG supervisor which controls all input/output interfaces with other processors and determines which PEG mode is to be utilized were studied in detail. A description of the two guidance modes for which Level C requirements have been formulated was presented. Functions required for proper execution of the guidance software were defined. The requirements for a navigation function that is used in the prediction logic of PEG mode 4 were discussed. It is concluded that this function is extracted from the current navigation FSSR
Modeling crustal structure through the use of converted phases in teleseismic body-wave forms
By comparing records of the radial component of motion of teleseismic P waves to records of the vertical component, it is possible to identify S phases within the P wave form. These phases are generated by the mechanism of P to S conversion at discontinuities in velocity under the receiving station. Similar phases of the S to P converted type appear as precursors to the direct SV arrival. Models for the crustal structure can be tested by generating synthetic seismograms for both components of motion of both the P and SV waves and comparing with the data. The technique has been used to model the crustal structure at WWSSN stations CAR and COR. It has also been used to check a recently proposed model for the crustal structure in eastern Canada which contains a large low-shear-velocity zone at the base of the crust. This study indicates that the crustal structure in eastern Canada is highly non-uniform with perhaps few features common to the whole region. Finally, the technique is used to identify several stations in the WWSSN which appear to be located on highly anomalous structure
Recommended from our members
Waveform-level time-domain simulation comparison study of three shipboard power system architectures
Detailed waveform-level modeling and simulation of three alternative shipboard power system architectures is presented herein. The three system architectures are based on conventional 60Hz medium-voltage ac (MVAC), higherfrequency 240Hz medium-voltage ac (HFAC) and mediumvoltage dc (MVDC) technologies. To support the quantitative assessment and comparison of these three different power system architectures, each technology was modeled using a common representative, notional baseline ship. The baseline ship represents a multi-mission destroyer fitted with an 80MW next generation integrated power system (NGIPS). Modeling of each power system architecture is set forth along with simulation studies for three fault scenarios. Each of the three power system architectures was implemented within the MATLAB/ Simulink environment. Continuity of service was evaluated for each architecture along with a fault scenario using an operability metric. After a brief description of the three power system architectures and the operability metric, quantitative results are presented.Center for Electromechanic
Recommended from our members
Cross-platform validation of notional baseline architecture models of naval electric ship power systems
To support efforts in assessing the relative merit of alternative power system architectures for future naval combatants, the Electric Ship Research and Development Consortium (ESRDC) has developed notional baseline models for each of the primary candidate architectures currently considered, medium-voltage DC (MVDC), conventional 60 Hz medium-voltage (MVAC), and high-frequency medium-voltage (HFAC). Initial efforts have focused on the development of a consistent set of component models, of which the system models can be comprised, and the basic definition of the system models. The broader objectives of the consortium, however, go beyond the definition of the baseline models. The focus is on the process by which the models are implemented in software and validated, the process by which the performance of the disparate system models are objectively and quantitatively assessed and compared, and, ultimately, the process by which the relative merits of the architectures may be assessed. This paper focuses specifically on cross-platform component validation.Center for Electromechanic
Intersex related gene expression profiles in clams Scrobicularia plana : molecular markers and environmental application
Intersex, the appearance of female characteristics in male gonads, has been identified in several aquatic species. It is a widespread phenomenon in populations of the bivalve, Scrobicularia plana, from the southwest coast of the U.K. Genes previously identified as differentially expressed (ferritin, testicular haploid expressed gene, THEG, proliferating cell nuclear antigen, PCNA; receptor activated protein kinase C, RACK; cytochrome B, CYB; and cytochrome c oxidase 1, COX1) in intersex clams relative to normal male clams, were selected for characterisation and an environmental survey of the Channel region. Transcripts were significantly differentially expressed at sites with varying intersex incidence and contaminant burdens. Significant correlations between specific gene expressions, key contaminants and sampling locations have been identified, though no single gene was associated with intersex incidence. The results highlight the difficulty in understanding the intersex phenomenon in molluscs where there is still a lack of knowledge on the control of normal reproduction
Catalyzed oxidation of aniline by hydrogen peroxide in the presence of cnts: A Possible case of a nanodimension reaction
The oxidation of aniline by hydrogen peroxide produces nitrosobenzene as the initial product, which undergoes further oxidation to nitrobenzene. The nitrosobenzene formation is catalyzed by functionalized multiwalled carbon nanotubes (CNT) followed by a coupling reaction between nitrosobenzene and aniline to produce azobenzene. This reaction proceeds rapidly resulting in the UV-VIS absorption spectrum showing a maxima at 327 nm and 425 nm. The nitrosobenzene yield in the presence of CNTs is controlled by the amount present in the medium. As the reaction is not catalyzed by unfunctionalized CNTs or graphitic particles, the uniqueness of the functionalized multiwalled CNTs in this catalysis suggests a nano dimensional reaction pathway
- …