1,501 research outputs found
Machine learning identifies a compact gene set for monitoring the circadian clock in human blood
Intensive Cultural Resources Survey Of 53 Acres Along Seber Road In Harris County, Texas
HRA Gray & Pape, LLC., of Houston, Texas performed an intensive archaeological pedestrian and reconnaissance-level walkover survey on an estimated 21.4-hectare (53-acre) property designated for residential development in Harris County, Texas. The project is being conducted on private property in anticipation of potential United States Army Corps of Engineers permitting requirements.
All fieldwork and reporting activities were completed with reference to the Texas Antiquities Code 26.24, Council of Texas Archeologists guidelines, federal (National Historic Preservation Act) laws and guidelines (United States Department of the Interior 1981), and guidance for conducting cultural resources surveys pursuant to Section 106 of the National Historic Preservation Act (Advisory Council on Historic Preservation 2001).
Site file research was completed using the online Texas Archaeological Sites Atlas maintained by the Texas Historical Commission. No previously recorded historic properties, historic markers, National Register of Historic Places, or archaeological sites were identified within a 1.6-kilometer (1-mile) radius during the background research. The review of the Texas Historical Commission files online did identify 2 areas that had been previously surveyed within the 1.6-kilometers (1-mile) search radius; however, these surveys did not identify archaeological resources.
Field investigations were conducted on March 10, 2014 and required approximately 48 person hours to complete. All fieldwork and reporting activities were conducted and completed with reference to Section 106 of the National Historic Preservation Act, as amended and Texas survey Standards. The survey consisted of walkover, shovel testing, and photo-documentation of the permit area/Area of Potential Effects. Subsurface investigation included the excavation of 42 shovel tests, all of which were negative.
During this investigation, no new or previously identified archaeological sites were recorded. Shovel testing identified soil profiles that gave no indication of buried cultural horizons. One extant historic-age storage barn was identified along the northwestern boundary of the property. The structure, constructed sometime after 1944, includes walls made of lumber and the roof was constructed of corrugated metal. None of the construction materials or methods appeared to be of unique design.
Based on the negative results of this survey, HRA Gray & Pape, LLC. recommends no further cultural resources investigations within the property, and that the project be allowed to proceed as planned
Results of the Deepest All-Sky Survey for Continuous Gravitational Waves on LIGO S6 Data Running on the Einstein@Home Volunteer Distributed Computing Project
We report results of a deep all-sky search for periodic gravitational waves from isolated neutron stars in data from the S6 LIGO science run. The search was possible thanks to the computing power provided by the volunteers of the Einstein@Home distributed computing project
Effects of Data Quality Vetoes on a Search for Compact Binary Coalescences in Advanced LIGO\u27s First Observing Run
The first observing run of Advanced LIGO spanned 4 months, from 12 September 2015 to 19 January 2016, during which gravitational waves were directly detected from two binary black hole systems, namely GW150914 and GW151226. Confident detection of gravitational waves requires an understanding of instrumental transients and artifacts that can reduce the sensitivity of a search. Studies of the quality of the detector data yield insights into the cause of instrumental artifacts and data quality vetoes specific to a search are produced to mitigate the effects of problematic data. In this paper, the systematic removal of noisy data from analysis time is shown to improve the sensitivity of searches for compact binary coalescences. The output of the PyCBC pipeline, which is a python-based code package used to search for gravitational wave signals from compact binary coalescences, is used as a metric for improvement. GW150914 was a loud enough signal that removing noisy data did not improve its significance. However, the removal of data with excess noise decreased the false alarm rate of GW151226 by more than two orders of magnitude, from 1 in 770 yr to less than 1 in 186 000 yr
The Basic Physics of the Binary Black Hole Merger GW150914
The first direct gravitational-wave detection was made by the Advanced Laser Interferometer Gravitational Wave Observatory on September 14, 2015. The GW150914 signal was strong enough to be apparent, without using any waveform model, in the filtered detector strain data. Here, features of the signal visible in the data are analyzed using concepts from Newtonian physics and general relativity, accessible to anyone with a general physics background. The simple analysis presented here is consistent with the fully general-relativistic analyses published elsewhere, in showing that the signal was produced by the inspiral and subsequent merger of two black holes. The black holes were each of approximately 35 M , still orbited each other as close as ∼350 km apart and subsequently merged to form a single black hole. Similar reasoning, directly from the data, is used to roughly estimate how far these black holes were from the Earth, and the energy that they radiated in gravitational waves
The Rate of Binary Black Hole Mergers Inferred From Advanced LIGO Observations Surrounding GW150914
A transient gravitational-wave signal, GW150914, was identified in the twin Advanced LIGO detectors on 2015 September 2015 at 09:50:45 UTC. To assess the implications of this discovery, the detectors remained in operation with unchanged configurations over a period of 39 days around the time of the signal. At the detection statistic threshold corresponding to that observed for GW150914, our search of the 16 days of simultaneous two-detector observational data is estimated to have a false-alarm rate (FAR) o
Characterization of Transient Noise in Advanced LIGO Relevant to Gravitational Wave Signal GW150914
On September 14, 2015, a gravitational wave signal from a coalescing black hole binary system was observed by the Advanced LIGO detectors. This paper describes the transient noise backgrounds used to determine the significance of the event (designated GW150914) and presents the results of investigations into potential correlated or uncorrelated sources of transient noise in the detectors around the time of the event. The detectors were operating nominally at the time of GW150914. We have ruled out environmental influences and non-Gaussian instrument noise at either LIGO detector as the cause of the observed gravitational wave signal
Directly Comparing GW150914 With Numerical Solutions of Einstein\u27s Equations for Binary Black Hole Coalescence
We compare GW150914 directly to simulations of coalescing binary black holes in full general relativity, including several performed specifically to reproduce this event. Our calculations go beyond existing semianalytic models, because for all simulations—including sources with two independent, precessing spins—we perform comparisons which account for all the spin-weighted quadrupolar modes, and separately which account for all the quadrupolar and octopolar modes. Consistent with the posterior distributions reported by Abbott et al. [Phys. Rev. Lett. 116, 241102 (2016)] (at the 90% credible level), we find the data are compatible with a wide range of nonprecessing and precessing simulations. Follow-up simulations performed using previously estimated binary parameters most resemble the data, even when all quadrupolar and octopolar modes are included. Comparisons including only the quadrupolar modes constrain the total redshifted mass Mz ∈ ½64 M⊙ − 82 M⊙_, mass ratio 1=q ¼ m2=m1 ∈ ½0.6; 1_, and effective aligned spin χeff ∈ ½−0.3; 0.2_, where χeff ¼ ðS1=m1 þ S2=m2Þ · ˆL=M. Including both quadrupolar and octopolar modes, we find the mass ratio is even more tightly constrained. Even accounting for precession, simulations with extreme mass ratios and effective spins are highly inconsistent with the data, at any mass. Several nonprecessing and precessing simulations with similar mass ratio and χeff are consistent with the data. Though correlated, the components’ spins (both in magnitude and directions) are not significantly constrained by the data: the data is consistent with simulations with component spin magnitudes a1;2 up to at least 0.8, with random orientations. Further detailed follow-up calculations are needed to determine if the data contain a weak imprint from transverse (precessing) spins. For nonprecessing binaries, interpolating between simulations, we reconstruct a posterior distribution consistent with previous results. The final black hole’s redshifted mass is consistent with Mf;z in the range 64.0 M⊙ − 73.5 M⊙ and the final black hole’s dimensionless spin parameter is consistent with af ¼ 0.62–0.73. As our approach invokes no intermediate approximations to general relativity and can strongly reject binaries whose radiation is inconsistent with the data, our analysis provides a valuable complement to Abbott et al. [Phys. Rev. Lett. 116, 241102 (2016)]
GW151226: Observation of Gravitational Waves from a 22-Solar-Mass Binary Black Hole Coalescence
We report the observation of a gravitational-wave signal produced by the coalescence of two stellar-mass black holes. The signal, GW151226, was observed by the twin detectors of the Laser Interferometer Gravitational-Wave Observatory (LIGO) on December 26, 2015 at 03:38:53 UTC. The signal was initially identified within 70 s by an online matched-filter search targeting binary coalescences. Subsequent off-line analyses recovered GW151226 with a network signal-to-noise ratio of 13 and a significance greater than 5 σ. The signal persisted in the LIGO frequency band for approximately 1 s, increasing in frequency and amplitude over about 55 cycles from 35 to 450 Hz, and reached a peak gravitational strain of 3.4+0.7−0.9×10−22. The inferred source-frame initial black hole masses are 14.2+8.3−3.7M⊙ and 7.5+2.3−2.3M⊙ and the final black hole mass is 20.8+6.1−1.7M⊙. We find that at least one of the component black holes has spin greater than 0.2. This source is located at a luminosity distance of 440+180−190 Mpc corresponding to a redshift 0.09+0.03−0.04. All uncertainties define a 90 % credible interval. This second gravitational-wave observation provides improved constraints on stellar populations and on deviations from general relativity
Observation of Gravitational Waves from a Binary Black Hole Merger
On September 14, 2015 at 09:50:45 UTC the two detectors of the Laser Interferometer Gravitational-Wave Observatory simultaneously observed a transient gravitational-wave signal. The signal sweeps upwards in frequency from 35 to 250 Hz with a peak gravitational-wave strain of 1.0×10−21. It matches the waveform predicted by general relativity for the inspiral and merger of a pair of black holes and the ringdown of the resulting single black hole. The signal was observed with a matched-filter signal-to-noise ratio of 24 and a false alarm rate estimated to be less than 1 event per 203 000 years, equivalent to a significance greater than 5.1 {\sigma}. The source lies at a luminosity distance of 410+160−180 Mpc corresponding to a redshift z=0.09+0.03−0.04. In the source frame, the initial black hole masses are 36+5−4M⊙ and 29+4−4M⊙, and the final black hole mass is 62+4−4M⊙, with 3.0+0.5−0.5M⊙c2 radiated in gravitational waves. All uncertainties define 90% credible intervals.These observations demonstrate the existence of binary stellar-mass black hole systems. This is the first direct detection of gravitational waves and the first observation of a binary black hole merger
- …