77 research outputs found
Electrolysis of low-grade and saline surface water
Review Article
Published: 17 February 2020
Electrolysis of low-grade and saline surface water
Wenming Tong, Mark Forster, Fabio Dionigi, Sören Dresp, Roghayeh Sadeghi Erami, Peter Strasser, Alexander J. Cowan & Pau Farràs
Nature Energy (2020)Cite this article
1779 Accesses
1 Citations
60 Altmetric
Metricsdetails
Abstract
Powered by renewable energy sources such as solar, marine, geothermal and wind, generation of storable hydrogen fuel through water electrolysis provides a promising path towards energy sustainability. However, state-of-the-art electrolysis requires support from associated processes such as desalination of water sources, further purification of desalinated water, and transportation of water, which often contribute financial and energy costs. One strategy to avoid these operations is to develop electrolysers that are capable of operating with impure water feeds directly. Here we review recent developments in electrode materials/catalysts for water electrolysis using low-grade and saline water, a significantly more abundant resource worldwide compared to potable water. We address the associated challenges in design of electrolysers, and discuss future potential approaches that may yield highly active and selective materials for water electrolysis in the presence of common impurities such as metal ions, chloride and bio-organisms.W.T., M.F., R.S.E., A.J.C. and P.F. acknowledge financial support from INTERREG Atlantic Area programme (Grant reference EAPA_190_2016). P.F. acknowledges support from Royal Society Alumni programme. F.D., S.D. and P.S. gratefully acknowledge financial support by the German Research Foundation (DFG) through Grant reference number STR 596/8-1 and the federal ministry for economic affairs and energy (Bundesministerium für Wirtschaft und Energie, BMWi) under grant number 03EIV041F. P.S. acknowledges partial funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany´s Excellence Strategy – EXC 2008/1 – 390540038 (zum Teil gefördert durch die Deutsche Forschungsgemeinschaft (DFG) im Rahmen der Exzellenzstrategie des Bundes und der Länder – EXC 2008/1 – 390540038).peer-reviewed2020-08-1
Atomically dispersed Pt-N-4 sites as efficient and selective electrocatalysts for the chlorine evolution reaction
Chlorine evolution reaction (CER) is a critical anode reaction in chlor-alkali electrolysis. Although precious metal-based mixed metal oxides (MMOs) have been widely used as CER catalysts, they suffer from the concomitant generation of oxygen during the CER. Herein, we demonstrate that atomically dispersed Pt-N-4 sites doped on a carbon nanotube (Pt-1/CNT) can catalyse the CER with excellent activity and selectivity. The Pt-1/CNT catalyst shows superior CER activity to a Pt nanoparticle-based catalyst and a commercial Ru/Ir-based MMO catalyst. Notably, Pt-1/CNT exhibits near 100% CER selectivity even in acidic media, with low Cl- concentrations (0.1M), as well as in neutral media, whereas the MMO catalyst shows substantially lower CER selectivity. In situ electrochemical X-ray absorption spectroscopy reveals the direct adsorption of Cl- on Pt-N-4 sites during the CER. Density functional theory calculations suggest the PtN4C12 site as the most plausible active site structure for the CER
On the Functional Significance of the P1 and N1 Effects to Illusory Figures in the Notch Mode of Presentation
The processing of Kanizsa figures have classically been studied by flashing the full “pacmen” inducers at stimulus onset. A recent study, however, has shown that it is advantageous to present illusory figures in the “notch” mode of presentation, that is by leaving the round inducers on screen at all times and by removing the inward-oriented notches delineating the illusory figure at stimulus onset. Indeed, using the notch mode of presentation, novel P1and N1 effects have been found when comparing visual potentials (VEPs) evoked by an illusory figure and the VEPs to a control figure whose onset corresponds to the removal of outward-oriented notches, which prevents their integration into one delineated form. In Experiment 1, we replicated these findings, the illusory figure was found to evoke a larger P1 and a smaller N1 than its control. In Experiment 2, real grey squares were placed over the notches so that one condition, that with inward-oriented notches, shows a large central grey square and the other condition, that with outward-oriented notches, shows four unconnected smaller grey squares. In response to these “real” figures, no P1 effect was found but a N1 effect comparable to the one obtained with illusory figures was observed. Taken together, these results suggest that the P1 effect observed with illusory figures is likely specific to the processing of the illusory features of the figures. Conversely, the fact that the N1 effect was also obtained with real figures indicates that this effect may be due to more global processes related to depth segmentation or surface/object perception
State estimation for miso non-linear systems in controller canonical form
We propose a new observer where the model, decomposed in generalized canonical form of regulation described by Fliess, is dissociated from the part assuring error correction. The obtained stable exact estimates give direct access to state variables in the form of successive derivatives. The dynamic response of the observer converges exponentially, as long as the nonlinearities are locally of Lipschitz type. In this case, we demonstrate that a quadratic Lyapunov function provides a number of inequalities which guarantee at least local stability. A synthesis of gains is proposed, independent of the observation time scale. Simulations of a Düffing system and a Lorenz strange attractor illustrate theoretical developments
- …