34,492 research outputs found
Microcomputerized electric field meter diagnostic and calibration system
A computerized field meter calibration system which includes an apparatus for testing the calibration of field meters normally utilized for measuring electromagnetic field potentials is described. A reference voltage is applied to the field meter for causing signals to be produced on the output terminals thereof. A bank of relays is provided for selectively connecting output terminals of the field meter to a multiplexer by means of a digital voltmeter and an oscilloscope. A frequency-shift-keyed receiver is also connected to one of the terminals of the field meter for transmitting and converting a frequency shift keyed signal to a digital signal which is, subsequently, applied to the multiplexer
Quantum Flux and Reverse Engineering of Quantum Wavefunctions
An interpretation of the probability flux is given, based on a derivation of
its eigenstates and relating them to coherent state projections on a quantum
wavefunction. An extended definition of the flux operator is obtained using
coherent states. We present a "processed Husimi" representation, which makes
decisions using many Husimi projections at each location. The processed Husimi
representation reverse engineers or deconstructs the wavefunction, yielding the
underlying classical ray structure. Our approach makes possible interpreting
the dynamics of systems where the probability flux is uniformly zero or
strongly misleading. The new technique is demonstrated by the calculation of
particle flow maps of the classical dynamics underlying a quantum wavefunction.Comment: Accepted to EP
Large liquid rocket engine transient performance simulation system
A simulation system, ROCETS, was designed and developed to allow cost-effective computer predictions of liquid rocket engine transient performance. The system allows a user to generate a simulation of any rocket engine configuration using component modules stored in a library through high-level input commands. The system library currently contains 24 component modules, 57 sub-modules and maps, and 33 system routines and utilities. FORTRAN models from other sources can be operated in the system upon inclusion of interface information on comment cards. Operation of the simulation is simplified for the user by run, execution, and output processors. The simulation system makes available steady-state trim balance, transient operation, and linear partial generation. The system utilizes a modern equation solver for efficient operation of the simulations. Transient integration methods include integral and differential forms for the trapezoidal, first order Gear, and second order Gear corrector equations. A detailed technology test bed engine (TTBE) model was generated to be used as the acceptance test of the simulation system. The general level of model detail was that reflected in the Space Shuttle Main Engine DTM. The model successfully obtained steady-state balance in main stage operation and simulated throttle transients, including engine starts and shutdown. A NASA FORTRAN control model was obtained, ROCETS interface installed in comment cards, and operated with the TTBE model in closed-loop transient mode
A new method for treating optimal trajectories with restricted segments
New method for treating optimal trajectorie
Large liquid rocket engine transient performance simulation system
Phase 1 of the Rocket Engine Transient Simulation (ROCETS) program consists of seven technical tasks: architecture; system requirements; component and submodel requirements; submodel implementation; component implementation; submodel testing and verification; and subsystem testing and verification. These tasks were completed. Phase 2 of ROCETS consists of two technical tasks: Technology Test Bed Engine (TTBE) model data generation; and system testing verification. During this period specific coding of the system processors was begun and the engineering representations of Phase 1 were expanded to produce a simple model of the TTBE. As the code was completed, some minor modifications to the system architecture centering on the global variable common, GLOBVAR, were necessary to increase processor efficiency. The engineering modules completed during Phase 2 are listed: INJTOO - main injector; MCHBOO - main chamber; NOZLOO - nozzle thrust calculations; PBRNOO - preburner; PIPE02 - compressible flow without inertia; PUMPOO - polytropic pump; ROTROO - rotor torque balance/speed derivative; and TURBOO - turbine. Detailed documentation of these modules is in the Appendix. In addition to the engineering modules, several submodules were also completed. These submodules include combustion properties, component performance characteristics (maps), and specific utilities. Specific coding was begun on the system configuration processor. All functions necessary for multiple module operation were completed but the SOLVER implementation is still under development. This system, the Verification Checkout Facility (VCF) allows interactive comparison of module results to store data as well as provides an intermediate checkout of the processor code. After validation using the VCF, the engineering modules and submodules were used to build a simple TTBE
Delivering benefits, tax credits and employment services: problems for disadvantaged users and potential solutions
Recommended from our members
A learning object success story
This paper outlines an approach to designing a course entirely in learning objects. It provides a theoretical basis for the design and then presents evaluation data from a master’s level course using this design. It also describes several re-uses of the learning objects on other courses and in different contexts. Each learning object is conceived as a whole learning experience, thus avoiding many of the problems associated with assembling components of disparate kinds
Strong absorption and selective thermal emission from a mid-infrared metamaterial
We demonstrate thin-film metamaterials with resonances in the mid-infrared
wavelength range. Our structures are numerically modeled and experimentally
characterized by reflection and angularly-resolved thermal emission
spectroscopy. We demonstrate strong and controllable absorption resonances
across the mid-infrared wavelength range. In addition, the polarized thermal
emission from these samples is shown to be highly selective and largely
independent of emission angles from normal to 45 degrees. Experimental results
are compared to numerical models with excellent agreement. Such structures hold
promise for large-area, low-cost metamaterial coatings for control of gray- or
black-body thermal signatures, as well as for possible mid-IR sensing
applications.Comment: The following article has been submitted to Appl. Phys. Lett. After
it is published, it will be found at http://apl.aip.org/. 14 pages including
4 figure page
Recommended from our members
The impact of uncertainty in satellite data on the assessment of flood inundation models
The performance of flood inundation models is often assessed using satellite observed data; however these data have inherent uncertainty. In this study we assess the impact of this uncertainty when calibrating a flood inundation model (LISFLOOD-FP) for a flood event in December 2006 on the River Dee, North Wales, UK. The flood extent is delineated from an ERS-2 SAR image of the event using an active contour model (snake), and water levels at the flood margin calculated through intersection of the shoreline vector with LiDAR topographic data. Gauged water levels are used to create a reference water surface slope for comparison with the satellite-derived water levels. Residuals between the satellite observed data points and those from the reference line are spatially clustered into groups of similar values. We show that model calibration achieved using pattern matching of observed and predicted flood extent is negatively influenced by this spatial dependency in the data. By contrast, model calibration using water elevations produces realistic calibrated optimum friction parameters even when spatial dependency is present.
To test the impact of removing spatial dependency a new method of evaluating flood inundation model performance is developed by using multiple random subsamples of the water surface elevation data points. By testing for spatial dependency using Moran’s I, multiple subsamples of water elevations that have no significant spatial dependency are selected. The model is then calibrated against these data and the results averaged. This gives a near identical result to calibration using spatially dependent data, but has the advantage of being a statistically robust assessment of model performance in which we can have more confidence. Moreover, by using the variations found in the subsamples of the observed data it is possible to assess the effects of observational uncertainty on the assessment of flooding risk
- …