Socio-economic determinants of income among cowpea farmers in Bama local government area of Borno state, Nigeria.

The paper analyzed the socioeconomic determinants of income among cowpea farmers in Bama Local Government Area (LGA) of Borno State, Nigeria. Primary data were mainly used for the study. This was collected using structured questionnaires administered to 120 cowpea farmers sampled from six villages spread across the LGA. The study employed both descriptive and inferential statistics to analyze the data. The findings of the study revealed that about 78% of the respondents were males while 22% were females. Majority of the farmers (63.3%) had formal education and 73.3% cultivated farm land of not more than 2 hectares. The regression analysis result indicated that the variables specified in the model explain 75% of the income generated by the cowpea farmers in the study area. Educational level, number of productive members per household, access to extension agents and years of farming experience were significantly and positively related to income of cowpea farmers. Major constraints reported by the cowpea farmers in the study area include high cost of inputs and inadequate storage facilities. Based on the results of the study, it was recommended that policy measures aimed at providing relevant training opportunities and education schemes to the farmers should be encouraged; further more, farmers should be encouraged to join or form cooperative societies to take advantage of economics of scale in purchasing inputs and also to obtain good price for their produce.KEY WORDS: Socio-economic, Determinants, Income, Cowpea, Bama, Nigeria

ETS-1 oncoprotein expression is decreased in aggressive papillary transitional cell carcinoma of the urinary bladder: An immunohistochemical study

Introduction: ETS-1 proto-oncogene is a transcription factor that plays multiple roles in the process of oncogenesis and helps in the process of tumor invasion. ETS-1 oncoprotein correlation with high grade and invasive tumors is controversial; as it is found to be upregulated with some tumors and down regulated with others. Expression of ETS-1 in urinary bladder carcinoma (UBC) and its correlation with tumor differentiation and invasiveness are still under-investigated. So far, there is no reliable prognostic marker has been proved for detection of the tumor progression and recurrence.Objectives: To analyze the correlation between ETS-1 oncoprotein immunohistochemical expression and the different stages and grades of the primary papillary transitional cell carcinoma of the urinary bladder.Patients and methods: This is a retrospective cross sectional study that included archival material from 150 cancer cases and 24 control biopsies.Results: There was a decreased ETS-1 oncoprotein expression with increasing stage and grade of the tumor with a highly significant statistical correlation (P = 0.001). With the quantitative assessment of the immunohistochemical results and using ROC (receiver operating characteristics) curve, cut-off values were found, that were associated with high grade and muscle invasive tumors (≤30% and ≤20%, respectively).Conclusion: ETS-1 oncoprotein is down regulated with high grade and highly invasive urinary bladder papillary transitional cell carcinomas. This oncoprotein may be used as an independent prognostic marker to predict the aggressive papillary transitional carcinomas with high invasive potential. More studies are needed to confirm our results.Keywords: Papillary transitional cell carcinoma; ETS-1; Prognostic marker; Immunohistochemical; Stage; Grad

Structural and luminescence characterization of lithium-borosulfophosphate glasses containing dysprosium ions

Rare earth doped glasses have been a great deal of research interest due to their prominent applications in laser lighting technology. However, achieving highly efficient yellow light emission from these materials require the collective efforts of many researchers across the world. Hence, a series of high optical quality dysprosium doped lithium-borosulfophosphate glasses with chemical composition of 15Li2O-30B2O3-15SO3-(40-x)P2O5-xDy2O3 (where x = 0.1, 0.3, 0.5, 0.7 and 1.0 in mol%) were prepared by convectional melt quenching technique and characterized by X-Ray diffraction (XRD), Fourier Transform Infrared (FTIR) and Photoluminescence (PL) measurements. XRD pattern of the host glass confirms its amorphous nature while the results from FTIR spectra analysis indicates the presence of BO3, BO4, PO4 and SO42- groups in the host network structure. The photoluminescence spectral analysis revealed three emission bands at 494 nm, 585 nm and 673 nm attributed to the electronic transitions of 4F9/2→6H15/2, 4F9/2→6H13/2 and 4F9/2→6H15/2,respectively, under the excitation of 386 nm. Among all the prepared glass samples, 1.0 mol% Dy3+ contained glass sample exhibits an intense yellow emission at 585 nm which specifies its prospective suitability for yellow laser applications.Keywords: Borosulfophosphate glasses, Dysprosium ions, Fourier transform infrared spectroscopy, Photoluminescence analysi

Melt Electrospinning Designs for Nanofiber Fabrication for Different Applications

Nanofibers have been attracting growing attention owing to their outstanding physicochemical and structural properties as well as diverse and intriguing applications. Electrospinning has been known as a simple, flexible, and multipurpose technique for the fabrication of submicro scale fibers. Throughout the last two decades, numerous investigations have focused on the employment of electrospinning techniques to improve the characteristics of fabricated fibers. This review highlights the state of the art of melt electrospinning and clarifies the major categories based on multitemperature control, gas assist, laser melt, coaxial, and needleless designs. In addition, we represent the effect of melt electrospinning process parameters on the properties of produced fibers. Finally, this review summarizes the challenges and obstacles connected to the melt electrospinning technique.Scopu

Effects of four pre-sowing treatment methods (double phase) on the germination of the seeds of Afzelia africana Sm. ex Pers

The study investigated the effects of four pre-treatment methods on the germination response of the seeds of Afzelia africana (Sm. ex Pers) in the savannah ecozones of Nigeria. The experiment was carried out in two phases. Phase I involved; 50% concentrated sulphuric acid for 10 minutes, hot water at 100ºC for 3 minutes, cold water at room temperature for 24 hours, Mechanical scarification (rubbing on abrasive concrete surface). Phase II of the experiment was carried out based on the result of phase I. Mechanical scarification, which performed best among the treatments used in the first phase, was closely examined. The various mechanical scarifications used were rubbing the seeds on abrasive concrete surface to the length of 1mm into the seed coat, 2mm, 3mm and 4mm. The experimental layout used was Completely Randomized Design. For phase I, mechanical scarification had 25% germination rate and had the highest germination compared to other treatments. Due to the performance of mechanical scarification in phase I, varying mechanical scarification treatments were further investigated in phase II of the experiment. The result of the analysis of variance indicated a significant difference between the varying mechanical scarification treatments (p≤0.05). Separation of the means showed that 1mm mechanical scarification treatment differed significantly from all other treatments. 1mm mechanical scarification treatment gave an average germination of 50% and early emergence of 9 days. Therefore, 1mm mechanical scarification treatment was regarded as the best mechanical scarification treatment for the germination of Afzelia africana seeds.Keywords: pre-treatment, dormancy, germination, Afzelia african

A new spectrophotometric method for the determination of methyldopa

AbstractA new, simple and low cost spectrophotometric method for the determination of methyldopa in pharmaceutical preparations was developed. The method was based on the coupling of methyldopa with 2,6-dichloroquinone-4-chlorimide (DCQ). The absorbance maximum (λmax) of the resulted colored product was at 400nm. Different buffers were used to determine the optimal pH for the reaction. About 1% w/v acetate buffer with pH 8.0 gave the optimal pH required for the reaction. Of the different solvents tried, water and ethanol were found to be the most suitable solvents. Beer’s law was obeyed in concentration range of 4–20μg/ml methyldopa. The correlation coefficient was found to be (r=0.9975). The limit of detection and limit of quantification were 1.1μg/ml and 3.21μg/ml, respectively. The reaction ratio between methyldopa and DCQ was studied and found to be 1:3. The work included the study of the possible interference of hydrochlorothiazide found in combination with methyldopa tablets. The method was validated and results obtained for the assay of two different brands of methyldopa tablets were compared with the BP method (colorimetric). The repeatability and reproducibility of the developed method were evaluated and the obtained results quoted. The derivative formed as a result of the reaction of methyldopa with DCQ was isolated and its possible mechanistic pathway was suggested

Slepton Flavor Nonuniversality, the Muon EDM and its Proposed sensitive Search at Brookhaven

We analyze the electric dipole moment of the electron ($d_e$), of the neutron ($d_n$) and of the muon ($d_{\mu}$) using the cancellation mechanism in the presence of nonuniversalities of the soft breaking parameters. It is shown that the nonuniversalities in the slepton sector produce a strong violation of the scaling relation $d_{\mu}/d_e\simeq m_{\mu}/m_e$ in the cancellation region. An analysis of $d_e, d_n$ and $d_{\mu}$ under the constraints of the current experimental limits on $d_e$ and $d_n$ and under the constraints of the recent Brookhaven result on $g_{\mu}-2$ shows that in the non-scaling region $d_{\mu}$ can be as large as ($10^{-24}-10^{-23}$)ecm and thus within reach of the recently proposed Brookhaven experiment for a sensitive search for $d_{\mu}$ at the level of $10^{-24}$ ecm.Comment: 24 pages, Latex, including 5 figures with additional reference

Supersymmetric Relations Among Electromagnetic Dipole Operators

Supersymmetric contributions to all leptonic electromagnetic dipole operators have essentially identical diagramatic structure. With approximate slepton universality this allows the muon anomalous magnetic moment to be related to the electron electric dipole moment in terms of supersymmetric phases, and to radiative flavor changing lepton decays in terms of small violations of slepton universality. If the current discrepancy between the measured and Standard Model values of the muon anomalous magnetic moment is due to supersymmetry, the current bound on the electron electric dipole moment then implies that the phase of the electric dipole operator is less than $2 \times 10^{-3}$. Likewise the current bound on $\mu \to e \gamma$ decay implies that the fractional selectron-smuon mixing in the left-left mass squared matrix, \delta m_{\smuon \selectron}^2 / m_{\slepton}^2, is less than $10^{-4}$. These relations and constraints are fairly insensitive to details of the superpartner spectrum for moderate to large $\tan \beta$.Comment: Latex, 38 pages, 2 figure

Top Squarks and Bottom Squarks in the MSSM with Complex Parameters

We present a phenomenological study of top squarks (~t_1,2) and bottom squarks (~b_1,2) in the Minimal Supersymmetric Standard Model (MSSM) with complex parameters A_t, A_b, \mu and M_1. In particular we focus on the CP phase dependence of the branching ratios of (~t_1,2) and (~b_1,2) decays. We give the formulae of the two-body decay widths and present numerical results. We find that the effect of the phases on the (~t_1,2) and (~b_1,2) decays can be quite significant in a large region of the MSSM parameter space. This could have important implications for (~t_1,2) and (~b_1,2) searches and the MSSM parameter determination in future collider experiments. We have also estimated the accuracy expected in the determination of the parameters of ~t_i and ~b_i by a global fit of the measured masses, decay branching ratios and production cross sections at e^+ e^- linear colliders with polarized beams. Analysing two scenarios, we find that the fundamental parameters apart from A_t and A_b can be determined with errors of 1% to 2%, assuming an integrated luminosity of 1 ab^-1 and a sufficiently large c.m.s. energy to produce also the heavier ~t_2 and ~b_2 states. The parameter A_t can be determined with an error of 2 - 3%, whereas the error on A_b is likely to be of the order of 50%.Comment: 31 pages, 8 figures, comments and references added, conclusions unchanged; version to appear in Phys. Rev.