First record of the red shrimp, Aristeus antennatus (Risso, 1816) (Decapoda: Aristeidae) from the Aegean Sea coast of Turkey

A female specimen of the deep-water red shrimp, Aristeus antennatus(Risso, 1816) was caught at depths of between 550 m and 670 m during 2005 by trawling off the Marmaris coast. A. antennatus is a species known to inhabit only the Levantine Sea coast of Turkey. This paper is on the first record of the species along the southern Aegean Sea coast of Turke

Irrigation Efficiency and Uniformity, and Crop Water Use Efficiency

This Extension Circular describes various irrigation efficiency, crop water use efficiency, and irrigation uniformity evaluation terms that are relevant to irrigation systems and management practices currently used in Nebraska, in other states, and around the world. The definitions and equations described can be used by crop consultants, irrigation district personnel, and university, state, and federal agency personnel to evaluate how efficiently irrigation water is applied and/or used by the crop, and can help to promote better or improved use of water resources in agriculture. As available water resources become scarcer, more emphasis is given to efficient use of irrigation water for maximum economic return and water resources sustainability. This requires appropriate methods of measuring and evaluating how effectively water extracted from a water source is used to produce crop yield. Inadequate irrigation application results in crop water stress and yield reduction. Excess irrigation application can result in pollution of water sources due to the loss of plant nutrients through leaching, runoff, and soil erosion

Irrigation Efficiency and Uniformity, and Crop Water Use Efficiency

This Extension Circular describes various irrigation efficiency, crop water use efficiency, and irrigation uniformity evaluation terms that are relevant to irrigation systems and management practices currently used in Nebraska, in other states, and around the world. The definitions and equations described can be used by crop consultants, irrigation district personnel, and university, state, and federal agency personnel to evaluate how efficiently irrigation water is applied and/or used by the crop, and can help to promote better or improved use of water resources in agriculture. As available water resources become scarcer, more emphasis is given to efficient use of irrigation water for maximum economic return and water resources sustainability. This requires appropriate methods of measuring and evaluating how effectively water extracted from a water source is used to produce crop yield. Inadequate irrigation application results in crop water stress and yield reduction. Excess irrigation application can result in pollution of water sources due to the loss of plant nutrients through leaching, runoff, and soil erosion

Soybean Yield, Evapotranspiration, Water Productivity, And Soil Water Extraction Response To Subsurface Drip Irrigation And Fertigation

Soybean [Glycine max (L.) Merr.] yield, irrigation water use efficiency (IWUE), crop water use efficiency (CWUE), evapotranspiration water use efficiency (ETWUE), and soil water extraction response to eleven treatments of full, limited, or delayed irrigation versus a rainfed control were investigated using a subsurface drip irrigation (SDI) system at a research site in south-central Nebraska. The SDI system laterals were 0.40 m deep in every other row middle of 0.76 m spaced plant rows. Actual evapotranspiration (ETa) was quantified in all treatments and used to schedule irrigation events on a 100% ETa replacement basis in all but three of the eleven treatments (i.e., 75% ETa replacement was used in two, and 60% ETa replacement was used in one). The irrigation amount (Ia) applied at each event was 100% of the ETa amount, except for two 100% ETa treatments in which only 65% or 50% of the water needed to cover the treatment plot area was applied to enable a test of a partial surface area-based irrigation approach. The first irrigation event was delayed until soybean stage R3 (begin pod) in two 100% Ia treatments, but thereafter they were irrigated with either 100% or 75% ETa replacement. Two 100% ETa and 100% Ia treatments also were used to evaluate soybean response to nitrogen (N) application methods (i.e., a preplant method versus N injection using the SDI system). Soybean ETa varied from 452 mm for the rainfed treatment to 600 mm (30% greater) for the fully irrigated treatment (100% ETa and 100% Ia) in 2007, and from 473 to 579 mm (20% greater) for the same treatments, respectively, in 2008. Among the irrigated treatments, 100% ETa and 65% Ia had the lowest 2007 ETa value (557 mm), whereas 100% ETa and 50% Ia had the lowest 2008 ETa (498 mm). The 100%, 75%, and 60% ETa treatments with 100% Ia had respective actual ETa values that declined linearly in 2008 (i.e., 579, 538, and 498 mm), but not in 2007. Seasonal totals for ETa versus Ia exhibited a linear relationship (R2 = 0.68 in 2007 and R2 = 0.67 in 2008). Irrigation enhanced soybean yields from rainfed yield baselines of 4.04 ton ha-1 in 2007 and 4.82 ton ha-1 in 2008) to a maximum of 4.94 ton ha-1 attained in 2007 with the delay to R3 irrigation treatment (its yield was significantly greater, p \u3c 0.05, than that of the seven other treatments) and 4.97 ton ha-1 attained in 2008 with the 100% ETa and 100% Ia preplant N treatment. Seed yield had a quadratic relationship with irrigation water applied and a linear relationship with ETa that was stronger in the drier year of 2007. Each 25.4 mm incremental increase in seasonal irrigation water applied increased soybean yield by 0.323 ton ha-1 (beyond the intercept) in 2007 and by 0.037 ton ha-1 in 2008. Each 25.4 mm increase in ETa generated a yield increase of 0.114 ton ha-1 (beyond the intercept) in 2007, but only 0.02 ton ha-1 in the wetter year of 2008. This research demonstrated that delaying the onset of irrigation until the R3 stage and practicing full irrigation thereafter for soybean grown on silt loam soils resulted in yields (and crop water productivity) that were similar to full-season irrigation scheduling strategies, and this result may be applicable in other regions with edaphic and climatic characteristics similar to those in south-central Nebraska

Soybean Yield, Evapotranspiration, Water Productivity, And Soil Water Extraction Response To Subsurface Drip Irrigation And Fertigation

Soybean [Glycine max (L.) Merr.] yield, irrigation water use efficiency (IWUE), crop water use efficiency (CWUE), evapotranspiration water use efficiency (ETWUE), and soil water extraction response to eleven treatments of full, limited, or delayed irrigation versus a rainfed control were investigated using a subsurface drip irrigation (SDI) system at a research site in south-central Nebraska. The SDI system laterals were 0.40 m deep in every other row middle of 0.76 m spaced plant rows. Actual evapotranspiration (ETa) was quantified in all treatments and used to schedule irrigation events on a 100% ETa replacement basis in all but three of the eleven treatments (i.e., 75% ETa replacement was used in two, and 60% ETa replacement was used in one). The irrigation amount (Ia) applied at each event was 100% of the ETa amount, except for two 100% ETa treatments in which only 65% or 50% of the water needed to cover the treatment plot area was applied to enable a test of a partial surface area-based irrigation approach. The first irrigation event was delayed until soybean stage R3 (begin pod) in two 100% Ia treatments, but thereafter they were irrigated with either 100% or 75% ETa replacement. Two 100% ETa and 100% Ia treatments also were used to evaluate soybean response to nitrogen (N) application methods (i.e., a preplant method versus N injection using the SDI system). Soybean ETa varied from 452 mm for the rainfed treatment to 600 mm (30% greater) for the fully irrigated treatment (100% ETa and 100% Ia) in 2007, and from 473 to 579 mm (20% greater) for the same treatments, respectively, in 2008. Among the irrigated treatments, 100% ETa and 65% Ia had the lowest 2007 ETa value (557 mm), whereas 100% ETa and 50% Ia had the lowest 2008 ETa (498 mm). The 100%, 75%, and 60% ETa treatments with 100% Ia had respective actual ETa values that declined linearly in 2008 (i.e., 579, 538, and 498 mm), but not in 2007. Seasonal totals for ETa versus Ia exhibited a linear relationship (R2 = 0.68 in 2007 and R2 = 0.67 in 2008). Irrigation enhanced soybean yields from rainfed yield baselines of 4.04 ton ha-1 in 2007 and 4.82 ton ha-1 in 2008) to a maximum of 4.94 ton ha-1 attained in 2007 with the delay to R3 irrigation treatment (its yield was significantly greater, p \u3c 0.05, than that of the seven other treatments) and 4.97 ton ha-1 attained in 2008 with the 100% ETa and 100% Ia preplant N treatment. Seed yield had a quadratic relationship with irrigation water applied and a linear relationship with ETa that was stronger in the drier year of 2007. Each 25.4 mm incremental increase in seasonal irrigation water applied increased soybean yield by 0.323 ton ha-1 (beyond the intercept) in 2007 and by 0.037 ton ha-1 in 2008. Each 25.4 mm increase in ETa generated a yield increase of 0.114 ton ha-1 (beyond the intercept) in 2007, but only 0.02 ton ha-1 in the wetter year of 2008. This research demonstrated that delaying the onset of irrigation until the R3 stage and practicing full irrigation thereafter for soybean grown on silt loam soils resulted in yields (and crop water productivity) that were similar to full-season irrigation scheduling strategies, and this result may be applicable in other regions with edaphic and climatic characteristics similar to those in south-central Nebraska

Surface energy balance model of transpiration from variable canopy cover and evaporation from residue-covered or bare soil systems: Model evaluation

A surface energy balance model (SEB) was extended by Lagos et al. Irrig Sci 28:51–64 (2009) to estimate evapotranspiration (ET) from variable canopy cover and evaporation from residue-covered or bare soil systems. The model estimates latent, sensible, and soil heat fluxes and provides a method to partition evapotranspiration into soil/residue evaporation and plant transpiration. The objective of this work was to perform a sensitivity analysis of model parameters and evaluate the performance of the proposed model to estimate ET during the growing and non-growing season of maize (Zea Mays L.) and soybeans (Glycine max) in eastern Nebraska. Results were compared with measured data from three eddy covariance systems under irrigated and rain-fed conditions. Sensitivity analysis of model parameters showed that simulated ET was most sensitive to changes in surface canopy resistance, soil surface resistance, and residue surface resistance. Comparison between hourly estimated ET and measurements made in soybean and maize fields provided support for the validity of the surface energy balance model. For growing season’s estimates, Nash–Sutcliffe coefficients ranged from 0.81 to 0.92 and the root mean square error (RMSE) varied from 33.0 to 48.3 W m–2. After canopy closure (i.e., after leaf area index (LAI = 4) until harvest), Nash–Sutcliffe coefficients ranged from 0.86 to 0.95 and RMSE varied from 22.6 to 40.5 W m–2. Performance prior to canopy closure was less accurate. Overall, the evaluation of the SEB model during this study was satisfactory

Quantification and Mapping of Surface Residue Cover for Maize and Soybean Fields in South Central Nebraska

The area cultivated under conservation tillage practices such as no-till and minimal tillage has recently increased in Midwestern states, including Nebraska. This increase, consequently, resulted in changes in some of the impacts of cropping systems on soil, such as enhancing soil and water quality, improving soil structure and infiltration, increasing water use efficiency, and promoting carbon sequestration. However, there are no methods currently available to quantify the percent crop residue cover (CRC) and the area under conservation tillage for maize and soybean at large scales on a continuous basis. This research used Landsat-7 (ETM+) and Landsat-8 (OLI) satellite data to evaluate six tillage indices [normalized difference tillage index (NDTI), normalized difference index 7 (NDI7), normalized difference index 5 (NDI5), normalized difference senescent vegetative index (NDSVI), modified CRC (ModCRC), and simple tillage index (STI)] to map CRC in eight counties in south central Nebraska. A linear regression CRC model showed that NDTI performed well in differentiating the CRC for different tillage practices at large scales, with a coefficient of determination (R2) of 0.62, 0.68, 0.78, and 0.07 for 25 March, 18 April, 28 May, and 6 June 2013 Landsat images, respectively. A minimum NDTI method was then used to spatially map the CRC on a regional scale by considering the timing of planting and tillage implementation. The measured CRC data were divided into training (calibration) and testing (validation) datasets. A CRC model was developed using the training dataset between minimum NDTI and measured CRC with an R2 of 0.89 (RMSD = 10.63%). A 3 × 3 matrix showed an overall accuracy of 0.90 with a kappa coefficient of 0.89. About 26% of the maize area and 15% of the soybean area had more than 70% CRC in south central Nebraska. This research and the procedures presented illustrate that multi-spectral Landsat images can be used to estimate and map CRC (error within 10.6%) on a regional scale and continuous basis using locally developed tillage practice versus crop residue algorithms. Further research is needed to incorporate soil and residue moisture content into the CRC versus tillage index to enhance the accuracy of the models for estimating CRC

Biobased Sprayable Mulch Films Suppressed Annual Weeds in Vegetable Crops

Biobased sprayable mulch (BSM) films are a potential alternative to herbicides, polyethylene plastic mulch film, and hand weeding for specialty crops. We developed a series of BSM films using locally available biomaterials [including corn (Zea mays) starch, glycerol, keratin hydrolysate, corn gluten meal, corn zein, eggshells, and isolated soy (Glycine max) protein] and tested their effects on weeds and crop yield during a total of seven greenhouse or field trials between 2017 and 2019 in Nebraska, USA. Application rates of BSM films applied in pots (greenhouse), planting holes in plastic film (field), or bed tops (field) ranged from 0.9 to 18.2 L⋅m−2; they were applied before and after the emergence of weeds. Weed control efficacy was variable, and results of greenhouse pots were rarely replicated under field conditions. Increasing the viscosity of the final suspension tested [BSM7; a mix of corn starch (72.8 g⋅L−1), glycerol (184.7 mL⋅L−1), keratin hydrolysate (733.3 mL⋅L−1), corn zein (19.8 g⋅L−1), and isolated soy protein (19.8 g⋅L−1)] reduced weed biomass by more than 96% in field-grown kale (Brassica oleracea var. sabellica) when applied to bare soil bed tops before or after weed emergence, but kale yield in treated plots was not different from the weedy control. The results demonstrated the potential for postemergence applications of BSM films, which increase application timing flexibility for growers. Further research is needed to explore the effects of BSM films on soil properties and crop physiology and yield

Identification of quantitative trait loci associated with iron deficiency chlorosis resistance in groundnut ( Arachis hypogaea )

Iron deficiency chlorosis is an important abiotic stress affecting groundnut production worldwide in calcareous and alkaline soils with a pH of 7.5–8.5. To identify genomic regions controlling iron deficiency chlorosis resistance in groundnut, the recombinant inbred line population from the cross TAG 24 × ICGV 86031 was evaluated for associated traits like visual chlorosis rating and SPAD chlorophyll meter reading across three crop growth stages for two consecutive years. Thirty-two QTLs were identified for visual chlorosis rating (3.9%–31.8% phenotypic variance explained [PVE]) and SPAD chlorophyll meter reading [3.8%–11% PVE] across three stages over 2 years. This is the first report of identification of QTLs for iron deficiency chlorosis resistance- associated traits in groundnut. Three major QTLs (>10% PVE) were identified at severe stage, while majority of other QTLs were having small effects. Interestingly, two major QTLs for visual chlorosis rating at 60 days (2013) and 90 days (2014) were located at same position on LG AhXIII. The identified QTLs/markers after validation across diverse genetic material could be used in genomics-assisted breeding