Dimensional Accuracy of Acrylic Resin Denture Bases : Literature Review

The more contact there is between the denture base and the cast, the better the fit, resulting in a close adaptation of the denture surface to the oral mucosa and a more retentive denture. Many prosthodontists, however, feel that compression-molded dentures processed with acrylic resins become ill fitting in the mouth because they warp severely during processing and while in service. One of the reasons for this problem is shrinkage of the acrylic resin due to polymerization. This article reviews the studies on accuracy of denture bases using various activation methods for polymerization of acrylic resin

Multivesicular Body Formation Requires OSBP–Related Proteins and Cholesterol

In eukaryotes, different subcellular organelles have distinct cholesterol concentrations, which is thought to be critical for biological functions. Oxysterol-binding protein-related proteins (ORPs) have been assumed to mediate nonvesicular cholesterol trafficking in cells; however, their in vivo functions and therefore the biological significance of cholesterol in each organelle are not fully understood. Here, by generating deletion mutants of ORPs in Caenorhabditis elegans, we show that ORPs are required for the formation and function of multivesicular bodies (MVBs). In an RNAi enhancer screen using obr quadruple mutants (obr-1; -2; -3; -4), we found that MVB–related genes show strong genetic interactions with the obr genes. In obr quadruple mutants, late endosomes/lysosomes are enlarged and membrane protein degradation is retarded, although endocytosed soluble proteins are normally delivered to lysosomes and degraded. We also found that the cholesterol content of late endosomes/lysosomes is reduced in the mutants. In wild-type worms, cholesterol restriction induces the formation of enlarged late endosomes/lysosomes, as observed in obr quadruple mutants, and increases embryonic lethality upon knockdown of MVB–related genes. Finally, we show that knockdown of ORP1L, a mammalian ORP family member, induces the formation of enlarged MVBs in HeLa cells. Our in vivo findings suggest that the proper cholesterol level of late endosomes/lysosomes generated by ORPs is required for normal MVB formation and MVB–mediated membrane protein degradation

Trion confinement in monolayer MoSe2 by carbon nanotube local gating

We have successfully confined trions into a one-dimensional restricted space of a MoSe2 device with CNT gate electrodes. The dry transfer process, including deterministic dry transfer of aligned CNTs, has led to an hBN-encapsulated MoSe2 device with CNT back gate electrodes. In contrast to a location without CNT gate electrodes, applying voltage via CNT gate electrodes significantly alters PL spectra at a location with CNT gate electrodes. PL imaging has revealed that image contrast from trions is linear along the CNT electrode underneath, consistent with 1D confinement of trions in response to the CNT local gating. The confinement width obtained from the PL image is 5.5 x 10^2 nm, consistent with nanoscale 1D confined trions with the diffraction limit broadening. This work has demonstrated electrical control of excitonic states at the nanoscale, leading to novel optoelectronic properties and exciton devices in the future

Development of Transfer Assist Robot Based on the User Needs

To develop technology based on the need for a Roboticbed® by the elderly and those with disabilities, this study extracts user needs and problems based on feasibility testing. This study makes it clear that those with severe disabilities want the Roboticbed® to support their independence in moving between bed and wheelchair and back. We propose a lifestyle for users and caregivers using the present version of the Roboticbed® based on experiments and extracted problems based on user needs. These results indicate that evaluation based on user needs is useful for specifying a design guide for user needs.首都大学東京学位論文甲第476号 副論文 (要約

肩鎖関節の安定性における肩鎖靭帯の役割 : 新鮮凍結屍体を用いた生体力学的研究

Background: Acromioclavicular (AC) joint dislocation is evaluated using the radiologically based Rockwood classification. The relationship between ligamentous injury and radiological assessment is still controversial. Purpose/hypothesis: To investigate how the AC ligament and trapezoid ligament biomechanically contribute to the stability of the AC joint using cadaveric specimens. The hypothesis was that isolated sectioning of the AC ligament would result in increased instability in the superior direction and that displacement >50% of the AC joint would occur. Study design: Controlled laboratory study. Methods: Six shoulders from 6 fresh-frozen cadavers were used in this study. Both the scapula and sternum were solidly fixed on a customized wooden jig with an external fixator. We simulated distal clavicular dislocation with sequential sectioning of the AC and coracoclavicular (CC) ligaments. Sectioning stages were defined as follows: stage 0, the AC ligament, CC ligament, and AC joint capsule were left intact; stage 1, the anteroinferior bundle of the AC ligament, joint capsule, and disk were sectioned; stage 2, the superoposterior bundle of the AC ligament was sectioned; and stage 3, the trapezoid ligament was sectioned. The distal clavicle was loaded with 70 N in the superior and posterior directions, and the magnitudes of displacement were measured. Results: The amounts of superior displacement averaged 3.7 mm (stage 0), 3.8 mm (stage 1), 8.3 mm (stage 2), and 9.5 mm (stage 3). Superior displacement >50% of the AC joint was observed in stage 2 (4/6; 67%) and stage 3 (6/6; 100%). The magnitudes of posterior displacement were 3.7 mm (stage 0), 3.7 mm (stage 1), 5.6 mm (stage 2), and 9.8 mm (stage 3). Posterior displacement >50% of the AC joint was observed in stage 3 (1/6; 17%). Conclusion: We found that the AC ligaments contribute significantly to AC joint stability, and superior displacement >50% of the AC joint can occur with AC ligament tears alone. Clinical relevance: The AC ligament plays an important role not only in horizontal stability but also in vertical stability of the AC joint.博士（医学）・甲第810号・令和4年3月15日© The Author(s) 2021. This open-access article is published and distributed under the Creative Commons Attribution - NonCommercial - No Derivatives License (https://creativecommons.org/ licenses/by-nc-nd/4.0/), which permits the noncommercial use, distribution, and reproduction of the article in any medium, provided the original author and source are credited. You may not alter, transform, or build upon this article without the permission of the Author(s). For article reuse guidelines, please visit SAGE’s website at http://www.sagepub.com/journals-permissions

Atomic-scale structural identification and evolution of Co-W-C ternary SWCNT catalytic nanoparticles: High-resolution STEM imaging on SiO 2

International audienceRecently, W-based catalysts have provided a promising route to synthesize single-walled carbon nanotubes (SWCNTs) with specific chirality, but the mechanism of the growth selectivity is vaguely understood. We propose a strategy to identify the atomic structure as well as the structure evolution of the CoW -C ternary SWCNT catalyst. The key is to use a thin SiO 2 film as the catalyst support and observation window. As the catalyst is uniformly prepared on this SiO 2 film and directly used for the SWCNT synthesis, this method has an advantage over conventional methods: it creates an opportunity to obtain original, statistical, and dynamic understanding of the catalyst. As a technique, atomic-scale imaging directly on SiO 2 serves as a powerful and versatile tool to investigate nanocrystals and high-temperature reactions; for the synthesis of SWCNTs, this work successfully visualizes the structure and evolution of the catalyst and illuminates the possible nucleation sites of the chirality-specific growth

使用者中心の福祉機器臨床評価手法 : プロトタイプロボティックベッドの評価

首都大学東京, 2015-03-25, 博士（作業療法学）, 甲第476号首都大学東

Functional tooth restoration by next-generation bio-hybrid implant as a bio-hybrid artificial organ replacement therapy

Bio-hybrid artificial organs are an attractive concept to restore organ function through precise biological cooperation with surrounding tissues in vivo. However, in bio-hybrid artificial organs, an artificial organ with fibrous connective tissues, including muscles, tendons and ligaments, has not been developed. Here, we have enveloped with embryonic dental follicle tissue around a HA-coated dental implant, and transplanted into the lower first molar region of a murine tooth-loss model. We successfully developed a novel fibrous connected tooth implant using a HA-coated dental implant and dental follicle stem cells as a bio-hybrid organ. This bio-hybrid implant restored physiological functions, including bone remodelling, regeneration of severe bone-defect and responsiveness to noxious stimuli, through regeneration with periodontal tissues, such as periodontal ligament and cementum. Thus, this study represents the potential for a next-generation bio-hybrid implant for tooth loss as a future bio-hybrid artificial organ replacement therapy