92 research outputs found

    Investigation of Input Signal Curve Effect on Formed Pulse of Hydraulic-Powered Pulse Machine

    Get PDF
    Well drilling machines should have as high efficiency factor as it is possible. This work proposes factors that are affected by change of input signal pulse curve. A series of runs are conducted on mathematical model of hydraulic-powered pulse machine. From this experiment, interrelations between input pulse curve and construction parameters are found. Results of conducted experiment are obtained with the help of the mathematical model, which is created in Simulink Matlab

    Optical and photoelectron spectroscopy studies of KPb2Cl 5 and RbPb2Cl5 laser crystals

    Full text link
    The paper presents the results of experimental study of electronic structure of RbPb2Cl5 and KPb2Cl5 laser crystals performed by the optical and photoelectron spectroscopy methods. On the basis of the optical absorption and low-temperature reflection spectra of these crystals we have determined the energy positions of the edges of the low-energy tail of the host absorption, the positions of the first excitonic absorption peaks, and exciton binding energies. The bandgap widths of these crystals at 8 K were estimated as Eg = 4.83 and 4.79 eV, respectively. Qualitative and quantitative analysis of RbPb2Cl 5 and KPb2Cl5 crystals were made on the basis of the core states photoelectron spectra. The elemental composition of the (0 0 1) surfaces of the crystals, the chemical state of the host atoms, the electronic structure of the valence band of the crystals were discussed on the basis on the spectroscopic data. © 2012 Elsevier B.V. All rights reserved

    Phase IIb randomized trial of adjunct immunotherapy in patients with first-diagnosed tuberculosis, relapsed and multi-drug-resistant (MDR) TB

    Get PDF
    Placebo-controlled, randomized, phase 2b trial was conducted in 34 adults comprising 18 first-diagnosed (52.9%), 6 relapsed (17.6%), and 10 MDR-TB (29.4%) cases to investigate the safety and efficacy of an oral immune adjunct (V5). The immunotherapy (N = 24) and placebo (N = 10) arms received once-daily tablet of V5 or placebo for one month in addition to conventional anti-TB therapy (ATT) administered under directly observed therapy (DOT)

    Verification of zinc role in pathophysiology of chronic obstructive pulmonary disease

    Get PDF
    Aim. Determination of the level of zinc and its fractions, as well as the enzyme neutrophilic elastase and albumin in persons suffering from chronic obstructive pulmonary disease (COPD), as well as smoking actively and passively. Materials and methods. The study involved 30 patients with a diagnosis of COPD and 90 healthy persons (60 of them smoking at the present time, 30 - no) who underwent spirometry and determination of zinc levels and its pools, albumin, and neutrophil elastase. All data are subject to statistical processing. Results. It is determined that the studied parameters differ significantly in the groups of smokers with COPD, healthy smokers and non-smokers, and correlate with the volume of forced exhalation for 1 second as a percentage of the due. Conclusion. The revealed regularities make it possible to consider the indicator "share of bound zinc fraction" introduced in the study as a screening criterion in diagnosing COPD in smokers

    Phylogeny, phylogeography and hybridization of Caucasian barbels of the genus Barbus (Actinopterygii, Cyprinidae)

    Get PDF
    Phylogenetic relationships and phylogeography of six species of Caucasian barbels, the genus Barbus s. str., were studied based on extended geographic coverage and using mtDNA and nDNA markers. Based on 27 species studied, matrilineal phylogeny of the genus Barbus is composed of two clades ¿ (a) West European clade, (b) Central and East European clade. The latter comprises two subclades: (b1) Balkanian subclade, and (b2) Ponto-Caspian one that includes 11 lineages mainly from Black and Caspian Sea drainages. Caucasian barbels are not monophyletic and subdivided for two groups. The Black Sea group encompasses species from tributaries of Black Sea including re-erected B. rionicus and excluding B. kubanicus. The Caspian group includes B. ciscaucasicus, B. cyri (with B. goktschaicus that might be synonymized with B. cyri), B. lacerta from the Tigris-Euphrates basin and B. kubanicus from the Kuban basin. Genetic structure of Black Sea barbels was influenced by glaciation-deglaciation periods accompanying by freshwater phases, periods of migration and colonization of Black Sea tributaries. Intra- and intergeneric hybridization among Caucasian barbines was revealed. In the present study, we report about finding of B. tauricus in the Kuban basin, where only B. kubanicus was thought to inhabit. Hybrids between these species were detected based on both mtDNA and nDNA markers. Remarkably, Kuban population of B. tauricus is distant to closely located conspecific populations and we consider it as relic. We highlight revealing the intergeneric hybridization between evolutionary tetraploid (2n=100) B. goktschaicus and evolutionary hexaploid (2n=150) Capoeta sevangi in Lake Sevan.The study was supported by Russian Science Foundation (grant no. 15-14-10020); final stage of the study was supported by Russian Foundation for Basic Research (grants nos. 18-54-05003 and 19-04-00719)

    Ex vivo перфузия донорских легких с использованием разработанного раствора с последующей ортотопичеcкой левосторонней трансплантацией легкого (экспериментальное исследование)

    Get PDF
    The continued unavailability of adequate organs for transplantation to meet the existing demand has resulted in a major challenge in transplantology. This is especially felt in lung transplantation (LTx). LTx is the only effective method of treatment for patients with end-stage lung diseases. Normothermic ex vivo lung perfusion (EVLP) has been proposed to increase the number of donor organs suitable for transplant – EVLP has proven itself in a number of clinical trials. The ability to restore suboptimal donor lungs, previously considered unsuitable for transplantation, can improve organ functionality, and thus increase the number of lung transplants. However, widespread implementation of ex vivo perfusion is associated with high financial costs for consumables and perfusate.Objective: to test the developed solution on an ex vivo lung perfusion model, followed by orthotopic LT under experimental conditions.Materials and methods. The experiment included lung explantation stages, static hypothermic storage, EVLP and orthotopic left LTx. Perfusion was performed in a closed perfusion system. We used our own made human albumin-based perfusion solution as perfusate. Perfusion lasted for 2 hours, and evaluation was carried out every 30 minutes. In all cases, static hypothermic storage after perfusion lasted for 4 hours. The orthotopic single-lung transplantation procedure was performed using assisted circulation, supplemented by membrane oxygenation. Postoperative follow-up was 2 hours, after which the experimental animal was euthanized.Results. Respiratory index before lung explantation was 310 ± 40 mmHg. The PaO2/FiO2 ratio had positive growth dynamics throughout the entire EVLP procedure. Oxygenation index was 437 ± 25 mm Hg after 120 minutes of perfusion. Throughout the entire EVLP procedure, there was a steady decrease in pulmonary vascular resistance (PVR). Initial PVR was 300 ± 100 dyn×s/cm5; throughout the EVLP, PVR tended to fall, reaching 38,5 ± 12 dyn×s/cm5 at the end of perfusion.Conclusion. A safe and effective EVLP using our perfusate is possible. The developed orthotopic left lung transplantation protocol under circulatory support conditions, supplemented by membrane oxygenation, showed it is efficient and reliable.На сегодняшний день в трансплантологии дефицит донорских органов остается главной проблемой. Особенно это ощущается в трансплантации легких. Трансплантация легких является единственным эффективным методом лечения пациентов с терминальными стадиями респираторной недостаточности. С целью расширения пула эффективных доноров предлагается технология нормотермической ex vivo перфузии, хорошо зарекомендовавшей себя в ряде клинических исследований. Возможность восстанавливать субоптимальные донорские легкие, считавшиеся ранее не пригодными для трансплантации, позволяет улучшить функциональные возможности органа и тем самым увеличить число трансплантаций легких. Однако широкое внедрение технологии ex vivo перфузии сопряжено с высокими финансовыми затратами на расходные материалы и перфузионный раствор.Цель: апробировать разработанный раствор на модели ex vivo перфузии донорских легких с последующей ортотопической трансплантацией легкого в условиях эксперимента.Материалы и методы. Эксперимент включал стадии эксплантации легких, статическое гипотермическое хранение, процедуру нормотермической ex vivo перфузии и ортотопическую левостороннюю трансплантацию. Перфузия проводилась в замкнутом контуре. В качестве перфузата использовали собственный перфузионный раствор на основе альбумина человека. Время перфузии составляло 2 часа, оценка проводилась каждые 30 минут. Период статического гипотермического хранения после перфузии составил 4 часа во всех наблюдениях. Процедуру ортотопической однолегочной трансплантации выполняли с применением вспомогательного кровообращения, дополненного мембранной оксигенацией. Период наблюдения в послеоперационном периоде составлял 2 часа, после чего проводилась эвтаназия экспериментального животного.Результаты. Показатель респираторного индекса до момента эксплантации донорских легких составлял 310 ± 40 мм рт. ст. На протяжении всей процедуры ex vivo перфузии отмечалась положительная динамика роста PaО2/FiO2. Спустя 120 минут перфузии индекс оксигенации составил 437 ± 25 мм рт. ст. Исходно показатель легочного сосудистого сопротивления (ЛСС) составлял 300 ± 100 Дин×с/см5, на протяжении всей ex vivo перфузии прослеживалась динамика к снижению показателя ЛСС; на окончание перфузии показатель ЛСС составил 38,5 ± 12 Дин×с/см5.Заключение. Экспериментальное исследование показало возможность проведения безопасной и эффективной процедуры нормотермической ex vivo перфузии с использованием отечественного перфузионного раствора. Разработанный протокол ортотопической трансплантации левого легкого в условиях вспомогательного кровообращения, дополненного мембранной оксигенацией, показал свою эффективность и надежность

    Осложнения раннего послеоперационного периода после трансплантации легких

    Get PDF
    Lung transplantation is the final treatment option for end-stage lung disease when all possible conservative treatment is exhausted. According to the International Society for Heart and Lung transplantation Registry, more than 60000 lung transplantations have been performed worldwide. The early post-transplant period following lung transplantation remains critical because of numerous complications. These complications can be divided into several groups. These are surgical complications, primary graft dysfunction and acute rejection, infection, cardiovascular, abdominal and renal disorder. This complications may result in significant morbidity, mortality and limit short and long-term survival. The aim of this review is to describe the main postoperative complications in first month after lung transplantation in the world practice.Трансплантация легких является последним возможным вариантом терапии терминальных стадий заболеваний легких в случае неэффективности консервативной терапии. Согласно регистру Международного общества трансплантации сердца и легких, в мире выполнено более 60 000 трансплантаций легких. Тяжесть послеоперационного периода обусловлена высокой частой послеоперационных осложнений. Осложнения послеоперационного периода могут быть разделены на несколько групп: хирургические осложнения, первичная дисфункция трансплантата и острое отторжение, сердечно-сосудистые, абдоминальные и почечные осложнения. Цель данного обзора литературы - анализ основных осложнений в раннем послеоперационном периоде после трансплантации легких в мировой практике

    Синтез толстослойных термостойких оксидных покрытий для защиты констуркционных сплавов

    Full text link
    The technology of producing composite ceramic coating based on zirconium dioxide has been developed. The method includes applying a ceramic material to metal substrates with a specially prepared surface. The sample is dried, calcined and sintered at 1200°С in vacuum

    ПРОЦЕССЫ ВО ВРЕМЯ ОТЖИГА КОНТАКТНЫХ СИСТЕМ Ti—Al—Ni И Ti—Al—Ni—Au

    Get PDF
    The Ti/Al/Ni/Au metallization system which is widely used in the technology of GaN based devices has a very important disadvantage: after annealing in nitrogen atmosphere for 30 sec. at temperature 850 оС it has rough surface with 300 nm hillocks. This creates troubles for lithographic processes. The aim of this work is to investigate the mechanism that generates the roughness of this surface and ways to minimize this disadvantage. We have studied the formation of rough surface in Ti/Al/Ni and Ti/Al/Ni/Au multilayer metallization systems. The resistivity of the metallization sheet increases with an increase of annealing temperature. This can be attributed to the mutual diffusion of metals and their active interaction with the formation of intermetallic phases. X−ray analysis proved the appearance of the following basic intermetallic phases: NiTi, Al3Ti, и Ni2Al3 in the metallization systems. After annealing the surface of metallization system Ti/Al/Ni becomes rougher; however, large hemispherical convexes (as in the Ti/Al/Ni/ Au metallization system) are not generated. Thus, the hypothesis of balling−up of molten Al−Ni alloy on the surface of metallization system Ti/Al/Ni has not been confirmed. To decrease the amount of Au–Al liquid phase that causes the rough surface of Ti/Al/Ni/Au metallization we reduced the thickness of the Au layer to 50 nm. At this Au layer thickness the surface morphology of metallization became much better: roughness reduced from 300 nm to 80 nm and the surface became specular. Изучены механизмы образования грубой бугорчатой поверхности для наиболее распространенной контактной металлизации к n−типу нитрида галлия — многослойной системе Ti/Al/Ni/Au, а также пути уменьшения этого недостатка, который создает проблемы при проведении последующей литографии. Исследовано образование во время отжига шероховатой поверхности при взаимодействии металлов в многослойных металлизациях Ti/Al/Ni и Ti/ Al/Ni/Au. Повышение поверхностного сопротивления обоих металлизаций с ростом температуры отжига объяснено взаимной диффузией металлов, ростом степени их взаимодействия с образованием различных их интерметаллических соединений, имеющих существенно большее удельное сопротивление, чем исходные металлы. Подтверждено наличие в исследуемой трехслойной металлизации Ti/Al/Ni после отжига следующих основных фаз: NiTi, Al3Ti, и Ni2Al3. Обнаружен рост шероховатости поверхности после отжига. Куполообразных выпуклостей, какие образуются у многослойной металлизации Ti/Al/ Ni/Au, на поверхности не выявлено. Эту гипотезу подтверждает каплеобразование в сплаве алюминия с никелем. Количество образующейся при отжиге жидкой фазы Au–Al, являющейся причиной образования грубой поверхности металлизации Ti/Al/Ni/Au, удалось, уменьшить снизив толщину слоя золота до минимума, при котором контраст элементов металлизации по отношению к поверхности полупроводника достаточен для самосовмещения при электронной литографии. Показано, что слой золота толщиной 50 нм достаточно для получения необходимого контраста. При такой толщине золота морфология поверхности значительно улучшилась: шероховатость уменьшилась с 300 до 80 нм, и поверхность стала блестящей.
    corecore