50,310 research outputs found
Recommended from our members
A new method to identify the optimal temperature of latent-heat thermal-energy storage systems for power generation from waste heat
The integration of thermal-energy storage (TES) within waste-heat recovery power generation systems has the potential to improve energy-efficiency in many industrial processes with variable and/or intermittent waste-heat streams. The first objective of this paper is to present a novel model of these systems that can be used at an early design stage to provide fast and accurate estimates of performance. More specifically, the method can identify the optimal temperature of latent-heat TES systems for waste-heat recovery applications based only on the known heat-source and heat-sink conditions (i.e., temperature, mass-flow rate and specificheat capacity), and can assess both single-stage and cascaded systems. The model has been validated against optimal organic Rankine cycle systems identified from a thermodynamic cycle optimisation. The second objective is to identify the characteristics of optimal systems for different heat-source profiles. The results indicate that, for a given application, there exists an optimal temperature for the latent-heat TES system that depends primarily on the relative size of the heat sink. Moreover, it is found that, for a heat engine operating with TES, the power rating ranges between 25% and 60% of the corresponding power rating for an optimal heat engine, operating without TES, that adapts instantaneously to heat-source fluctuations, whilst the total energy production is reduced by between 45% and 85% respectively. Finally, a small deviation is observed between the results obtained for the different heat sources considered, which suggests that these findings can be extrapolated to other heat sources not considered within this study
The interaction region of high energy protons
The spatial view of the interaction region of colliding high energy protons
(in terms of impact parameter) is considered. It is shown that the region of
inelastic collisions has a very peculiar shape. It saturates for central
collisions at an energy of 7 TeV. We speculate on the further evolution with
energy, which is contrasted to the "black disk" picture.Comment: 9 pages, 1 figure. arXiv admin note: text overlap with
arXiv:1406.215
A study of factors affecting the utility of implicit relevance feedback
Implicit relevance feedback (IRF) is the process by which a search system unobtrusively gathers evidence on searcher interests from their interaction with the system. IRF is a new method of gathering information on user interest and, if IRF is to be used in operational IR systems, it is important to establish when it performs well and when it performs poorly. In this paper we investigate how the use and effectiveness of IRF is affected by three factors: search task complexity, the search experience of the user and the stage in the search. Our findings suggest that all three of these factors contribute to the utility of IRF
Anisotropic constitutive relationships in energetic materials: PETN and HMX
This paper presents results of first-principles density functional calculations of the equation of state (EOS) of PETN-I and beta-HMX. The isotropic EOS for hydrostatic compression has been extended to include uniaxial compressions in the [100], [010], [001], [110], [101], [011], and [111] directions up to compression ratio V/V0 = 0.70. Equilibrium properties, including lattice parameters and elastic constants, as well as hydrostatic EOS are in good agreement with available experimental data. The shear stresses of uniaxially compressed PETN-I and beta-HMX have been evaluated and their behavior as a function of compression ratio has been used to make predictions of shock sensitivity of these EMs. A comparison of predicted sensitivities with available experimental data has also been performed
First-principles anisotropic constitutive relationships in β-cyclotetramethylene tetranitramine (β-HMX)
First-principles density functional theory calculations have been performed to obtain constitutive relationships in the crystalline energetic material β-cyclotetramethylene tetranitramine (β-HMX). In addition to hydrostatic loading, uniaxial compressions in the directions normal to the {100}, {010}, {001}, {110}, {101}, {011}, and {111} planes have been performed to investigate the anisotropic equation of state (EOS). The calculated lattice parameters and hydrostatic EOS are in reasonable agreement with the available experimental data. The uniaxial compression data show a significant anisotropy in the principal stresses, change in energy, band gap, and shear stresses, which might lead to the anisotropy of the elastic-plastic shock transition and shock sensitivity of β-HMX
Nanoscale Molecular Dynamics Simulaton of Shock Compression of Silicon
We report results of molecular dynamics simulation of shock wave propagation
in silicon in [100], [110], and [111] directions obtained using a classical
environment-dependent interatomic potential (EDIP). Several regimes of
materials response are classified as a function of shock wave intensity using
the calculated shock Hugoniot. Shock wave structure in [100] and [111]
directions exhibit usual evolution as a function of piston velocity. At piston
velocities km/s the shock wave consists of a fast elastic precursor followed by
a slower plastic front. At larger piston velocities the single overdriven
plastic wave propagates through the crystal causing amorphitization of Si.
However, the [110] shock wave exhibits an anomalous materials response at
intermediate piston velocities around km/s which is characterized by the
absence of plastic deformations
First-principles investigation of anisotropic constitutive relationships in pentaerythritol tetranitrate
First-principles density functional theory (DFT) calculations have been used to obtain the constitutive relationships of pentaerythritol tetranitrate (PETN-I), a crystalline energetic material. The isotropic equation of state (EOS) for hydrostatic compression has been extended to include uniaxial compressions in the , , , , , , and crystallographic directions up to a compression ratio of V/V0=0.70. DFT predicts equilibrium properties such as lattice parameters and elastic constants, as well as the hydrostatic EOS, in agreement with available experimental data. Our results show a substantial anisotropy of various properties of PETN-I upon uniaxial compression. To characterize the anisotropic traits of PETN, different physical properties of the uniaxially compressed crystal such as the energy per atom, band gap, and stress tensor have been evaluated as a function of compression ratio. The maximum shear stresses were calculated and examined for a correlation with the anisotropy in shock-initiation sensitivity
Density functional theory calculations of anisotropic constitutive relationships in alpha-cyclotrimethylenetrinitramine
Constitutive relationships in the crystalline energetic material alpha-cyclotrimethylenetrinitramine (alpha-RDX) have been investigated using first-principles density functional theory. The equilibrium properties of alpha-RDX including unit cell parameters and bulk modulus, as well as the hydrostatic equation of state (EOS), have been obtained and compared with available experimental data. The isotropic EOS has been extended to include the anisotropic response of alpha-RDX by performing uniaxial compressions normal to several low-index planes, {100}, {010}, {001}, {110}, {101}, {011}, and {111}, in the Pbca space group. The uniaxial-compression data exhibit a considerable anisotropy in the principal stresses, changes in energy, band gaps, and shear stresses, which might play a role in the anisotropic behavior of alpha-RDX under shock loading
Analysis and methodology for aeronautical systems technology program planning
A structured methodology was developed that allows the generation, analysis, and rank-ordering of system concepts by their benefits and costs, indicating the preferred order of implementation. The methodology is supported by a base of data on civil transport aircraft fleet growth projections and data on aircraft performance relating the contribution of each element of the aircraft to overall performance. The performance data are used to assess the benefits of proposed concepts. The methodology includes a computer program for performing the calculations needed to rank-order the concepts and compute their cumulative benefit-to-cost ratio. The use of the methodology and supporting data is illustrated through the analysis of actual system concepts from various sources
Charge ordering in doped manganese oxides: lattice dynamics and magnetic structure
Based on the Hamiltonian of small polarons with the strong nearest neighbor
repulsion, we have investigated the charge ordering phenomena observed in
half-doped manganites R_{1/2}A_{1/2}MnO_3. We have explored possible
consequences of the charge ordering phase in the half-doped manganites. First,
we have studied the renormalization of the sound velocity around ,
considering the acoustic phonons coupled to the electrons participating in the
charge ordering. Second, we have found a new antiferromagnetic phase induced by
the charge ordering, and discussed its role in connection with the specific
CE-type antiferromagnetic structure observed in half-doped manganites.Comment: 5 pages, 2 Postscript figures. To appear in Phys. Rev. B - Rapid
Comm. (01Jun97
- …