341 research outputs found
The Application of a Cylindrical-spherical Floating Ring Bearing as a Device to Control Stability of Turbogenerators
The development of a new device to control stability of turbogenerators is described. The device comprises a floating ring installed between the journal and bearing housing of a fluid film bearing. The journal and the inner surface of the ring are cylindrical while the outer surface of the ring and bearing surface are spherical providing axial location of the ring and self-alignment of the bearing. The employment of this device would lead to a consistent machine performance. System stability may be controlled by changing a number of bearing and floating ring parameters. This device also offers an additional advantage of having a very low frictional characteristic. A feasibility study was carried out to investigate the suitability of the new device to turbogenerator applications. Both theoretical analysis and experimental observations were carried out. Initial results suggest that the new floating ring device is a competitive alternative to other conventional arrangements
An investigation into the mechanical damping characteristics of catenary contact wires and their effect on aerodynamic galloping instability
Measurement of the damped oscillation of a section of the UK East Coast Main Line (ECML) catenary/contact wire system was undertaken, and the natural frequency and mechanical damping were found to be 1.4Hz and 0.05 respectively. This information was used to assess the effect of increasing the mechanical damping ratio on the susceptibility of the system to an aerodynamic galloping instability. The section of line tested was known to gallop at wind speeds of approximately 40 mile/h, and theoretical and experimental work verified this. A friction damper arm was designed and three units were fitted to the section of line affected. The introduction of increased mechanical damping was found to raise the mechanical damping coefficient of the line to between 0.095 and 0.18, and the mathematical analysis produced a theoretical wind speed for galloping oscillation of between 75 and 141 mile/h respectively. For over a year since the units were fitted, no problems with galloping instability have been observed
Coulomb Blockade in a Coupled Nanomechanical Electron Shuttle
We demonstrate single electron shuttling through two coupled nanomechanical
pendula. The pendula are realized as nanopillars etched out of the
semiconductor substrate. Coulomb blockade is found at room temperature,
allowing metrological applications. By controlling the mechanical shuttling
frequency we are able to validate the different regimes of electron shuttling
Stamp transferred suspended graphene mechanical resonators for radio-frequency electrical readout
We present a simple micromanipulation technique to transfer suspended
graphene flakes onto any substrate and to assemble them with small localized
gates into mechanical resonators. The mechanical motion of the graphene is
detected using an electrical, radio-frequency (RF) reflection readout scheme
where the time-varying graphene capacitor reflects a RF carrier at f=5-6 GHz
producing modulation sidebands at f +/- fm. A mechanical resonance frequency up
to fm=178 MHz is demonstrated. We find both hardening/softening Duffing effects
on different samples, and obtain a critical amplitude of ~40 pm for the onset
of nonlinearity in graphene mechanical resonators. Measurements of the quality
factor of the mechanical resonance as a function of DC bias voltage Vdc
indicate that dissipation due to motion-induced displacement currents in
graphene electrode is important at high frequencies and large Vdc
Electron pumping in graphene mechanical resonators
The combination of high frequency vibrations and metallic transport in
graphene makes it a unique material for nano-electromechanical devices. In this
letter, we show that graphene-based nano-electromechanical devices are
extremely well suited for charge pumping, due to the sensitivity of its
transport coefficients to perturbations in electrostatic potential and
mechanical deformations, with the potential for novel small scale devices with
useful applications
Minimization of phonon-tunneling dissipation in mechanical resonators
Micro- and nanoscale mechanical resonators have recently emerged as
ubiquitous devices for use in advanced technological applications, for example
in mobile communications and inertial sensors, and as novel tools for
fundamental scientific endeavors. Their performance is in many cases limited by
the deleterious effects of mechanical damping. Here, we report a significant
advancement towards understanding and controlling support-induced losses in
generic mechanical resonators. We begin by introducing an efficient numerical
solver, based on the "phonon-tunneling" approach, capable of predicting the
design-limited damping of high-quality mechanical resonators. Further, through
careful device engineering, we isolate support-induced losses and perform the
first rigorous experimental test of the strong geometric dependence of this
loss mechanism. Our results are in excellent agreement with theory,
demonstrating the predictive power of our approach. In combination with recent
progress on complementary dissipation mechanisms, our phonon-tunneling solver
represents a major step towards accurate prediction of the mechanical quality
factor.Comment: 12 pages, 4 figure
A hypothetico-deductive approach to assessing the social function of chemical signalling in a non-territorial solitary carnivore
The function of chemical signalling in non-territorial solitary carnivores is still relatively unclear. Studies on territorial solitary and social carnivores have highlighted odour capability and utility, however the social function of chemical signalling in wild carnivore populations operating dominance hierarchy social systems has received little attention. We monitored scent marking and investigatory behaviour of wild brown bears Ursus arctos, to test multiple hypotheses relating to the social function of chemical signalling. Camera traps were stationed facing bear ‘marking trees’ to document behaviour by different age sex classes in different seasons. We found evidence to support the hypothesis that adult males utilise chemical signalling to communicate dominance to other males throughout the non-denning period. Adult females did not appear to utilise marking trees to advertise oestrous state during the breeding season. The function of marking by subadult bears is somewhat unclear, but may be related to the behaviour of adult males. Subadults investigated trees more often than they scent marked during the breeding season, which could be a result of an increased risk from adult males. Females with young showed an increase in marking and investigation of trees outside of the breeding season. We propose the hypothesis that females engage their dependent young with marking trees from a young age, at a relatively ‘safe’ time of year. Memory, experience, and learning at a young age, may all contribute towards odour capabilities in adult bears
Electrical tuning of elastic wave propagation in nanomechanical lattices at MHz frequencies
Nanoelectromechanical systems (NEMS) that operate in the megahertz (MHz) regime allow energy transducibility between different physical domains. For example, they convert optical or electrical signals into mechanical motions and vice versa. This coupling of different physical quantities leads to frequency-tunable NEMS resonators via electromechanical non-linearities. NEMS platforms with single- or low-degrees of freedom have been employed to demonstrate quantum-like effects, such as mode cooling, mechanically induced transparency, Rabi oscillation, two-mode squeezing and phonon lasing. Periodic arrays of NEMS resonators with architected unit cells enable fundamental studies of lattice-based solid-state phenomena, such as bandgaps, energy transport, non-linear dynamics and localization, and topological properties, directly transferrable to on-chip devices. Here we describe one-dimensional, non-linear, nanoelectromechanical lattices (NEML) with active control of the frequency band dispersion in the radio-frequency domain (10–30 MHz). The design of our systems is inspired by NEMS-based phonon waveguides and includes the voltage-induced frequency tuning of the individual resonators. Our NEMLs consist of a periodic arrangement of mechanically coupled, free-standing nanomembranes with circular clamped boundaries. This design forms a flexural phononic crystal with a well-defined bandgap, 1.8 MHz wide. The application of a d.c. gate voltage creates voltage-dependent on-site potentials, which can significantly shift the frequency bands of the device. Additionally, a dynamic modulation of the voltage triggers non-linear effects, which induce the formation of a phononic bandgap in the acoustic branch, analogous to Peierls transition in condensed matter. The gating approach employed here makes the devices more compact than recently proposed systems, whose tunability mostly relies on materials’ compliance and mechanical non-linearities
Dirac electrons in graphene-based quantum wires and quantum dots
In this paper we analyse the electronic properties of Dirac electrons in
finite-size ribbons and in circular and hexagonal quantum dots made of
graphene.Comment: Contribution for J. Phys.: Cond. Mat. special issue on graphene
physic
- …