Prospects for improvement of mining machines' cutting picks

Advantages and disadvantages of tangential rotary picks widely used in mining machines are described. A prospective line of picks design improvement has been found based on a change in the principle of destruction. A new design of blade-type cutting picks with a reinforcing tip is proposed having extended service life, requiring less energy for rock breaking, reducing yield of fine dust and increasing the grade of the mined coal

Influence of alkaline modification on adsorption properties of alumina

The kinetics of water vapor adsorption on alumina adsorbents at a temperature of 25 °C was studied. It was shown that modification by cations of alkali metals (K, Na) of the adsorbent based on alumina allows increasing its efficiency in the process of water vapor adsorption. The mathematical treatment of the experimental data by the dependence of water vapor adsorption on the time with the help of the Linear Driving Force (LDF) model and the dependence of adsorbent's adsorption capacity on the water vapor concentration (adsorption isotherm) by Dubinin-Astakhov equation was carried out. Constants included in the equations were defined

Effect of particle size on adsorption kinetics of water vapor on porous aluminium oxide material

Influence of the grain size of aluminium oxide material, being a product of centrifugal thermal activation of hydrargillite, on adsorption kinetics of water vapors was studied. The material was characterized by the BET method and X-ray phase analysis (XRD). Influence of gas flow rate on adsorption dynamics was studied on a laboratory installation using McBain-Bakr quartz balance. It was shown that with the fraction size greater than 0.5-1.0 mm, the rate of water vapor adsorption on this adsorbent decreased, which was connected with the influence of internal diffusion resistance. On the base of the first-order kinetic equation for the water adsorption mathematical modeling was carried out. The kinetic parameters of the equation for the various grain size samples (0.25-0.5 mm and 0.5-1.0 mm and 3.7 x 6 mm granule) were determined

The influence of scandium on the composition and structure of the Ti-Al alloy obtained by "Hydride Technology"

In this study the influence of scandium on the structural and phase state of the Ti-Al alloy obtained by the method of “Hydride Technology” (HT). The Rietveld method has allowed for determining the content of basic phases of the 49at.%Ti-49at.%Al-2at.%Sc system. By means of the methods of transmission electron microscopy (TEM) and X-ray spectral microanalysis, it has been established that scandium additives into the Ti-Al system result in the change of the quantitative content of phases in local regions of the structure. The Ti2Al5 phase has been found, and Ti2Al has been absent. In the morphology of substructures Ti-Al and Ti-Al-Sc there are lamellar structures or lamellae; the peculiarities of the distribution, fraction and size of which are influenced by scandium additives. The average width of Al-rich lamellae has been 0.85 U+03BCm, which is four times greater than that for the Ti-Al system (0.21 U+03BCm). For Ti-rich lamellae of the sample of the Ti-Al-Sc alloy, the average width of the lamellae has been 0.54 U+03BCm, and for Ti-Al it has been 0.34 U+03BCm. Based on the obtained data, a scheme of the distribution of phases in the composition of the Ti-Al-Sc alloy in the lamellar structures has been proposed. It has been established that in the Ti-Al-Sc system there is growth of the near-surface strength relative to Ti-Al. In this way, the microhardness of the Ti-Al-Sc alloy has amounted to 1.7 GPa, that is of the Ti-Al alloy which is 1.2 GPa

Cobalt(II) and copper(II) complexes with carboxylic acids, imidazole, and 2-methylimidazole

The compositions of [MIm(MeIm)x]L complexes synthesized by the reaction of cobalt(II) and copper(II) fumarates ML · nH2O with imidazole (Im) and 2-methylimidazole (MeIm) were determined. The thermal decomposition of the salts was analyzed, and the pyridine nitrogen atom of imidazole and the oxygen atoms of carboxyl anions were shown to participate in complexation using electronic absorption spectra and IR spectra. The composition and stability of cobalt(II) and copper(II) imidazolatesuccinate complexes in an aqueous solution were determined photometrically and spectrophotometrically, and their higher stability in comparison with monoligand complexes was demonstrated

The preparation of the Ti-Al alloys based on intermetallic phases

This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-phase and multiphase systems, containing finely dispersed intermetallic compositions of phases Ti3Al, TiAl and TiAl3, are formed. Additionally, it was found that the pure finely dispersed (coherent-scattering region (CSR) up to 100 nm) intermetallic compound TiAl3 is formed at molar ratio of Ti:Al = 1:3. Experimentally proved the possibility of produce the complex composition of alloys and intermetallic compounds and products based on them

Structure peculiarities of binary state diagrams of vanadium with neighboring elements of Mendeleev’s periodic table

Data on search for correlations between a structure of state diagrams of binary systems based on V-Me (Me = Ti, Zr, Hf, Nb, Ta, Cr, Mo, W) and crystal-geometric and crystal-chemical parameters were presented. Manifestation of both positive and negative deviations in experimental concentration dependences of the atomic volume in solid solutions in systems V-Me (Me = Ti, Nb, Ta, Cr, Mo) from Zen's law was established. It was found that in the systems with unbounded regions of solid solutions, the deviation from Zen's law is insignificant. A correlation was found between the types of state diagrams and the difference in atomic volumes of alloy-forming elements in systems V-Me (Me = Ti, Nb, Ta, Cr, Mo)

Structure and phase composition of material based on vanadium alloy V-4.9Ti-4.8Cr and ferrite steel 17Cr-12Ni-Fe

Three-layer materials consisting of the V-4.9Ti-4.8Cr/ferrite steel 17Cr-12Ni-Fe /V-4.9Ti-4.8C

Reactive magnetron plasma modification of electrospun PLLA scaffolds with incorporated chloramphenicol for controlled drug release

Surface modification with the plasma of the direct current reactive magnetron sputtering has demonstrated its efficacy as a tool for enhancing the biocompatibility of polymeric electrospun scaffolds. Improvement of the surface wettability of materials with water, as well as the formation of active chemical bonds in the near-surface layers, are the main reasons for the described effect. These surface effects are also known to increase the release rate of drugs incorporated in fibers. Herein, we investigated the effect of plasma modification on the chloramphenicol release from electrospun poly (lactic acid) fibrous scaffolds. Scaffolds with high—50 wt./wt.%—drug content were obtained. It was shown that plasma modification leads to an increase in the drug release rate and drug diffusion coefficient, while not deteriorating surface morphology and mechanical properties of scaffolds. The materials’ antibacterial activity was observed to increase in the first day of the experiment, while remaining on the same level as the unmodified group during the next six days. The proposed technique for modifying the surface of scaffolds will be useful for obtaining drug delivery systems with controlled accelerated release, which can expand the possibilities of local applications of antibiotics and other drugs