Heat dissipation of high rate Li-SOCl sub 2 primary cells

The heat dissipation problem occurring in the lithium thionyl chloride cells discharged at relatively high rates under normal discharge conditions is examined. Four heat flow paths were identified, and the thermal resistances of the relating cell components along each flow path were accordingly calculated. From the thermal resistance network analysis, it was demonstrated that about 90 percent of the total heat produced within the cell should be dissipated along the radial direction in a spirally wound cell. In addition, the threshold value of the heat generation rate at which cell internal temperature could be maintained below 100 C, was calculated from total thermal resistance and found to be 2.9 W. However, these calculations were made only at the cell components' level, and the transient nature of the heat accumulation and dissipation was not considered. A simple transient model based on the lumped-heat-capacity concept was developed to predict the time-dependent cell temperature at different discharge rates. The overall objective was to examine the influence of cell design variable from the heat removal point of view under normal discharge conditions and to make recommendations to build more efficient lithium cells

Method for fabricating carbon/lithium-ion electrode for rechargeable lithium cell

The method includes steps for forming a carbon electrode composed of graphitic carbon particles adhered by an ethylene propylene diene monomer binder. An effective binder composition is disclosed for achieving a carbon electrode capable of subsequent intercalation by lithium ions. The method also includes steps for reacting the carbon electrode with lithium ions to incorporate lithium ions into graphitic carbon particles of the electrode. An electrical current is repeatedly applied to the carbon electrode to initially cause a surface reaction between the lithium ions and to the carbon and subsequently cause intercalation of the lithium ions into crystalline layers of the graphitic carbon particles. With repeated application of the electrical current, intercalation is achieved to near a theoretical maximum. Two differing multi-stage intercalation processes are disclosed. In the first, a fixed current is reapplied. In the second, a high current is initially applied, followed by a single subsequent lower current stage. Resulting carbon/lithium-ion electrodes are well suited for use as an anode in a reversible, ambient temperature, lithium cell

Anode for rechargeable ambient temperature lithium cells

An ambient room temperature, high density, rechargeable lithium battery includes a Li(x)Mg2Si negative anode which intercalates lithium to form a single crystalline phase when x is up to 1.0 and an amorphous phase when x is from 1 to 2.0. The electrode has good reversibility and mechanical strength after cycling

Sodium-metal chloride batteries

It was concluded that rapid development in the technology of sodium metal chloride batteries has been achieved in the last decade mainly due to the: expertise available with sodium sulfur system; safety; and flexibility in design and fabrication. Long cycle lives of over 1000 and high energy densities of approx. 100 Wh/kg have been demonstrated in both Na/FeCl2 and Na/NiCl2 cells. Optimization of porous cathode and solid electrolyte geometries are essential for further enhancing the battery performance. Fundamental studies confirm the capabilities of these systems. Nickel dichloride emerges as the candidate cathode material for high power density applications such as electric vehicle and space

Overcharge and overdischarge protection of ambient temperature secondary lithium cells

A cathode additive is provided for protecting an ambient temperature secondary lithium cell from overcharging or overdischarging. The cathode additive is chosen to create an upper voltage plateau which is slightly higher than a characteristic charge cutoff voltage of the cathode of the cell. The cathode additive additionally creates a lower voltage plateau which is slightly lower than the characteristic discharge cutoff voltage of the cell. Preferably, the cathode additive is a transition metal oxide or a sulfide and may, for example, include a mixture of Li2Mn2O4 and Li(0.1)MoO2

Breit Hamiltonian and QED Effects for Spinless Particles

We describe a simplified derivation for the relativistic corrections of order $\alpha^4$ for a bound system consisting of two spinless particles. We devote special attention to pionium, the bound system of two oppositely charged pions. The leading quantum electrodynamic (QED) correction to the energy levels is of the order of $\alpha^3$ and due to electronic vacuum polarization. We analyze further corrections due to the self-energy of the pions, and due to recoil effects, and we give a complete result for the scalar-QED leading logarithmic corrections which are due to virtual loops involving only the scalar constituent particles (the pions); these corrections are of order $\alpha^5 \ln \alpha$ for S states.Comment: 12 pages, LaTeX; references added (J. Phys. B, in press

Hospitalists in Teaching Hospitals: Opportunities but Not Without Danger

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73210/1/j.1525-1497.2004.42002.x.pd

Generation of Functional CLL-Specific Cord Blood CTL Using CD40-Ligated CLL APC

PMCID: PMC3526610This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited

The pathogenic role of circulating Hashimoto's Thyroiditis-derived TPO-positive IgG on fetal loss in naïve mice

Problem: Antibody-mediated autoimmune diseases, such as autoimmune thyroid diseases (ATD), systemic lupus erythematosus (SLE), and antiphospholipid syndrome (APS), often are associated with recurrent fetal loss. One of the ATD is Hashimoto's thyroiditis which recently showed association with complications of pregnancy with increased levels of circulating autoantibodies reactive with epitopes on thyroid tissue such as thyroid peroxidase (anti-TPO). In retrospective study of sera analyses in patients with Hashimoto's thyroiditis, all patients had mainly elevated circulating anti-TPO autoantibodies. Aim: We assessed the potential of human anti-TPO highly positive IgG, derived from patients with Hashimoto's thyroiditis sera associated with complications of pregnancy, to cause directly complications of pregnancy in murine model. Method of study: Naïve ICR female mice, infused intravenously with 100 μg of anti-TPO-positive IgG, showed increased fetal loss and embryo small for date (P <.001) in comparison with mice passively transferred with commercial IgG or PBS. Moreover, we observed embryos small for date in the mice passively transferred with anti-TPO-positive IgG, exemplified by reduced weight of embryos and placentae (P =.001). Histopathological examination revealed delay in fetal development in 50% cases of anti-TPO-positive IgG-treated mice. Importantly, pathological changes in the transition zone, state of glycogen cells, and significant structural changes in the labyrinth part of placenta were observed in all anti-TPO-positive IgG samples. Conclusion: The current study shows in the first time, a direct proof of concept, on the association of human TPO-positive IgG from Hashimoto's thyroiditis patients on fetal loss induction in murine model