188 research outputs found
On-Chip Integrated, Silicon-Graphene Plasmonic Schottky Photodetector with High Responsivity and Avalanche Photogain.
We report an on-chip integrated metal graphene-silicon plasmonic Schottky photodetector with 85 mA/W responsivity at 1.55 μm and 7% internal quantum efficiency. This is one order of magnitude higher than metal-silicon Schottky photodetectors operated in the same conditions. At a reverse bias of 3 V, we achieve avalanche multiplication, with 0.37A/W responsivity and avalanche photogain ∼2. This paves the way to graphene integrated silicon photonics.We acknowledge funding from EU Graphene Flagship (No. 604391), ERC Grant Hetero2D, and EPSRC Grant Nos. EP/ K01711X/1, EP/K017144/1, EP/N010345/1, EP/M507799/ 1, and EP/L016087/1.This is the final version of the article. It first appeared from the American Chemical Society via https://doi.org/10.1021/acs.nanolett.5b0521
Excitonic Emission of Monolayer Semiconductors Near-Field Coupled to High-Q Microresonators.
We present quantum yield measurements of single layer WSe2 (1L-WSe2) integrated with high-Q ( Q > 106) optical microdisk cavities, using an efficient (η > 90%) near-field coupling scheme based on a tapered optical fiber. Coupling of the excitonic emission is achieved by placing 1L-WSe2 in the evanescent cavity field. This preserves the microresonator high intrinsic quality factor ( Q > 106) below the bandgap of 1L-WSe2. The cavity quantum yield is QYc ≈ 10-3, consistent with operation in the broad emitter regime (i.e., the emission lifetime of 1L-WSe2 is significantly shorter than the bare cavity decay time). This scheme can serve as a precise measurement tool for the excitonic emission of layered materials into cavity modes, for both in plane and out of plane excitation
High-responsivity graphene photodetectors integrated on silicon microring resonators.
Graphene integrated photonics provides several advantages over conventional Si photonics. Single layer graphene (SLG) enables fast, broadband, and energy-efficient electro-optic modulators, optical switches and photodetectors (GPDs), and is compatible with any optical waveguide. The last major barrier to SLG-based optical receivers lies in the current GPDs' low responsivity when compared to conventional PDs. Here we overcome this by integrating a photo-thermoelectric GPD with a Si microring resonator. Under critical coupling, we achieve >90% light absorption in a ~6 μm SLG channel along a Si waveguide. Cavity-enhanced light-matter interactions cause carriers in SLG to reach ~400 K for an input power ~0.6 mW, resulting in a voltage responsivity ~90 V/W, with a receiver sensitivity enabling our GPDs to operate at a 10-9 bit-error rate, on par with mature semiconductor technology, but with a natural generation of a voltage, rather than a current, thus removing the need for transimpedance amplification, with a reduction of energy-per-bit, cost, and foot-print
Atomically thin quantum light-emitting diodes
Transition metal dichalcogenides are optically active, layered materials promising for fast optoelectronics and on-chip photonics. We demonstrate electrically driven single-photon emission from localized sites in tungsten diselenide and tungsten disulphide. To achieve this, we fabricate a light-emitting diode structure comprising single-layer graphene, thin hexagonal boron nitride and transition metal dichalcogenide mono- and bi-layers. Photon correlation measurements are used to confirm the single-photon nature of the spectrally sharp emission. These results present the transition metal dichalcogenide family as a platform for hybrid, broadband, atomically precise quantum photonics devices.European Research Council (Grant ID: PHOENICS), Engineering and Physical Sciences Research Council (Grant ID: EP/N010345/1
Atomically thin quantum light-emitting diodes
This is the final version. Available on open access from Nature Research via the DOI in this recordData availability:
The data that support the findings of this study are available from the corresponding authors upon request.Transition metal dichalcogenides are optically active, layered materials promising for fast optoelectronics and on-chip photonics. We demonstrate electrically driven single-photon emission from localized sites in tungsten diselenide and tungsten disulphide. To achieve this, we fabricate a light-emitting diode structure comprising single-layer graphene, thin hexagonal boron nitride and transition metal dichalcogenide mono- and bi-layers. Photon correlation measurements are used to confirm the single-photon nature of the spectrally sharp emission. These results present the transition metal dichalcogenide family as a platform for hybrid, broadband, atomically precise quantum photonics devices.European UnionEuropean Research Council (ERC)Engineering and Physical Sciences Research Council (EPSRC
Graphene-perovskite fibre photodetectors
The integration of optoelectronic devices, such as transistors and
photodetectors (PDs), into wearables and textiles is of great interest for
applications such as healthcare and physiological monitoring. These require
flexible/wearable systems adaptable to body motions, thus materials conformable
to non-planar surfaces, and able to maintain performance under mechanical
distortions. Here, we prepare fibre PDs combining rolled graphene layers and
photoactive perovskites. Conductive fibres (500/cm) are made by
rolling single layer graphene (SLG) around silica fibres, followed by
deposition of a dielectric layer (AlO and parylene C), another
rolled SLG as channel, and perovskite as photoactive component. The resulting
gate-tunable PDs have response time5ms, with an external
responsivity22kA/W at 488nm for 1V bias. The external responsivity is two
orders of magnitude higher and the response time one order of magnitude faster
than state-of-the-art wearable fibre based PDs. Under bending at 4mm radius, up
to80\% photocurrent is maintained. Washability tests show72\% of
initial photocurrent after 30 cycles, promising for wearable applications
Anomalous Zero Sound
We show that the anomalous term in the current, recently suggested by Son and
Yamamoto, modifies the structure of the zero sound mode in the Fermi liquid in
a magnetic field.Comment: 14 pages, 2 figure
Niobium diselenide superconducting photodetectors
We report the photoresponse of niobium diselenide (NbSe2), a transition metal dichalcogenide which exhibits superconducting properties
down to a single layer. Devices are built by using micromechanically cleaved 2–10 layers and tested under current bias using nano-optical
mapping in the 350 mK–5K range, where they are found to be superconducting. The superconducting state can be perturbed by absorption
of light, resulting in a voltage signal when the devices are current biased. The response is found to be energy dependent, making the devices
useful for applications requiring energy resolution, such as bolometry, spectroscopy, and infrared imaging
- …