Wavelet Transform-Based Damage Identification in Bladed Disks and Rotating Blades

Blade vibration and blade clearance are effective diagnostic features for the identification of blade damage in rotating machines. Blade tip-timing (BTT) is a noncontact method that is often used to monitor the vibration and clearance of blades in a rotating machinery. Standard signal processing of BTT measurements give one blade response sample per revolution of the machine which is often insufficient for the diagnosis of damage. This paper uses the raw data signals from the sensors directly and employs a wavelet energy-based mistuning index (WEBMI) to predict the presence and locations of damage in rotating blades. The Lipschitz exponent is derived from the wavelet packet coefficients and used to estimate the severity of the damage. In this study, experiments were conducted to obtain BTT measurements on rotating blades at  rpm using three different sensors: an active eddy current sensor, a passive eddy current sensor, and an optical sensor. In addition, hammer excitation experiments were conducted for various added mass (damage) cases to compute the damage severity for a bladed disk. To simulate the damage experimentally in the bladed disk and rotating blades, masses were added to the blades to alter their dynamics and mimic the damage. The results indicate that the WEBMI can detect the presence and location of damage in rotating blades using measurements from common BTT sensors. To check the robustness of the proposed damage severity index, the experimental results were compared with numerical simulation for the bladed disk and showed good agreement

Simulating eddy current sensor outputs for blade tip timing

Blade tip timing is a contactless method used to monitor the vibration of blades in rotating machinery. Blade vibration and clearance are important diagnostic features for condition monitoring, including the detection of blade cracks. Eddy current sensors are a practical choice for blade tip timing and have been used extensively. As the data requirements from the timing measurement become more stringent and the systems become more complicated, including the use of multiple sensors, the ability to fully understand and optimize the measurement system becomes more important. This requires detailed modeling of eddy current sensors in the blade tip timing application; the current approaches often rely on experimental trials. Existing simulations for eddy current sensors have not considered the particular case of a blade rotating past the sensor. Hence, the novel aspect of this article is the development of a detailed quasi-static finite element model of the electro-magnetic field to simulate the integrated measured output of the sensor. This model is demonstrated by simulating the effect of tip clearance, blade geometry, and blade velocity on the output of the eddy current sensor. This allows an understanding of the sources of error in the blade time of arrival estimate and hence insight into the accuracy of the blade vibration measurement

Sex and Gender Differences in Ischemic Heart Disease: Endocrine Vascular Disease Approach (EVA) Study Design

Improvements in ischemic heart disease (IHD) management have been unbalanced between sexes, with coronary microvascular dysfunction considered the likely underlying reason. The Endocrine Vascular disease Approach (EVA) is an observational study (Clinicaltrial.gov NCT02737982) aiming to assess sex and gender interactions between coronary circulation, sexual hormones, and platelet function. Consecutive patients with IHD undergoing coronary angiography will be recruited: (1) to assess sex and gender differences in angiographic reperfusion indexes; (2) to evaluate the effects of estrogen/androgen on sex-related differences in myocardial ischemia; (3) to investigate the platelet biology differences between men and women with IHD; (4) to verify sex- and gender-driven interplay between response to percutaneous coronary intervention, platelets, sex hormones, and myocardial damage at baseline and its impact on 12-month outcomes. The integration of sex and gender in this translational project on IHD will contribute to the identification of new targets for further innovative clinical interventions

An exploration of the relationships among facial dimensions, age, sex, dominance status and personality in rhesus macaques (Macaca mulatta)

Aspects of personality in nonhuman primates have been linked to health, social relationships, and life history outcomes. In humans as well as nonhuman primates, facial morphology is associated with assertiveness, aggression, and measures of dominance status. In this study we aimed to examine the relationship among facial morphology, age, sex, dominance status, and ratings on the personality dimensions Confidence, Openness, Assertiveness, Friendliness, Activity, and Anxiety in rhesus macaques (Macaca mulatta). We measured facial width-to-height ratio (fWHR) and lower-height/full-height ratio (fLHFH) using photographs from 109 captive rhesus macaques, which observers also assessed for dominance status and personality, and explored the associations among facial morphology, age, sex, dominance status, and personality. fWHR and fLHFH personality associations depended on age category: Assertiveness was associated with higher fWHR and fLHFH, and Confidence was associated with lower fWHR and fLHFH, but all these associations were consistent only in individuals <8 yr. of age. We found fWHR and fLHFH to not be consistently associated with sex or dominance status; compared to younger individuals, we found few associations with fWHR and fLHFH for individuals older than 8 yr., which may be due to limited sample size. Our results indicate that in macaques <8 yr. old, facial morphology is associated with the Assertiveness and Confidence personality dimensions, which is consistent with results suggesting a relationship between fWHR and trait aggression in humans and assertiveness in brown capuchins, all of which implies that fWHR might be a cue to assertive and aggressive traits

It is time to talk about people: a human-centered healthcare system

Examining vulnerabilities within our current healthcare system we propose borrowing two tools from the fields of engineering and design: a) Reason's system approach [1] and b) User-centered design [2,3]. Both approaches are human-centered in that they consider common patterns of human behavior when analyzing systems to identify problems and generate solutions. This paper examines these two human-centered approaches in the context of healthcare. We argue that maintaining a human-centered orientation in clinical care, research, training, and governance is critical to the evolution of an effective and sustainable healthcare system

Business analytics in industry 4.0: a systematic review

Recently, the term “Industry 4.0” has emerged to characterize several Information Technology and Communication (ICT) adoptions in production processes (e.g., Internet-of-Things, implementation of digital production support information technologies). Business Analytics is often used within the Industry 4.0, thus incorporating its data intelligence (e.g., statistical analysis, predictive modelling, optimization) expert system component. In this paper, we perform a Systematic Literature Review (SLR) on the usage of Business Analytics within the Industry 4.0 concept, covering a selection of 169 papers obtained from six major scientific publication sources from 2010 to March 2020. The selected papers were first classified in three major types, namely, Practical Application, Reviews and Framework Proposal. Then, we analysed with more detail the practical application studies which were further divided into three main categories of the Gartner analytical maturity model, Descriptive Analytics, Predictive Analytics and Prescriptive Analytics. In particular, we characterized the distinct analytics studies in terms of the industry application and data context used, impact (in terms of their Technology Readiness Level) and selected data modelling method. Our SLR analysis provides a mapping of how data-based Industry 4.0 expert systems are currently used, disclosing also research gaps and future research opportunities.The work of P. Cortez was supported by FCT - Fundação para a Ciência e Tecnologia within the R&D Units Project Scope: UIDB/00319/2020. We would like to thank to the three anonymous reviewers for their helpful suggestions

Global respiratory syncytial virus–related infant community deaths

Background Respiratory syncytial virus (RSV) is a leading cause of pediatric death, with >99% of mortality occurring in low- and lower middle-income countries. At least half of RSV-related deaths are estimated to occur in the community, but clinical characteristics of this group of children remain poorly characterized. Methods The RSV Global Online Mortality Database (RSV GOLD), a global registry of under-5 children who have died with RSV-related illness, describes clinical characteristics of children dying of RSV through global data sharing. RSV GOLD acts as a collaborative platform for global deaths, including community mortality studies described in this supplement. We aimed to compare the age distribution of infant deaths <6 months occurring in the community with in-hospital. Results We studied 829 RSV-related deaths <1 year of age from 38 developing countries, including 166 community deaths from 12 countries. There were 629 deaths that occurred <6 months, of which 156 (25%) occurred in the community. Among infants who died before 6 months of age, median age at death in the community (1.5 months; IQR: 0.8−3.3) was lower than in-hospital (2.4 months; IQR: 1.5−4.0; P < .0001). The proportion of neonatal deaths was higher in the community (29%, 46/156) than in-hospital (12%, 57/473, P < 0.0001). Conclusions We observed that children in the community die at a younger age. We expect that maternal vaccination or immunoprophylaxis against RSV will have a larger impact on RSV-related mortality in the community than in-hospital. This case series of RSV-related community deaths, made possible through global data sharing, allowed us to assess the potential impact of future RSV vaccines

Stress Concentration Factor of Expanded Aluminum Tubes Using Finite Element Modeling

This paper discusses the development of semi-empirical relations for the maximum stress concentration factor (SCF) around circular holes embedded in aluminum tubes under various expansion ratios and mandrel angles. Finite element models were developed to study the expansion of a typical aluminum tube with embedded holes of various sizes. An elastic perfectly-plastic material behaviour was used to describe the structural response of the tubes under expansion. Various hole-diameter-to-tubewall- thickness ratios, tube expansion ratios, and mandrel angles were considered to determine the stress state around the hole at zero and 90 degree locations from which the maximum SCF was determined. Semi-empirical relations for the maximum SCF using the Lagrange interpolation formulation were developed. The developed relations were found to predict the SCFs accurately

On the frictional sliding contact problem between a rigid circular conducting punch and a magneto-electro-elastic half-plane

The frictional sliding contact problem between a homogeneous magneto-electro-elastic material (MEEM) and a perfectly conducting rigid circular punch subjected to magneto-electro-mechanical loads is considered in this paper. The problem is formulated under plane strain conditions and the resulting plane magneto-electro-elasticity equations are converted analytically using Fourier transform into three coupled singular integral equations in which the main unknowns are the normal contact stress, the electric displacement and the magnetic induction. The main contribution of this work is the derivation of an analytical closed-form solution for the normal contact stresses, electric displacement and magnetic induction distributions. The primary purpose of this investigation is to study the effect of the friction coefficient, the punch radius, the applied magneto-electro-mechanical loadings, the material composition on the contact surface and in-plane surface stresses, electric displacement and magnetic induction distributions for the case of a circular stamp profile. (C) 2014 Elsevier Ltd. All rights reserved.The first three authors are grateful for the funding provided to their laboratory by the Tunisian Ministry of Higher Education and Scientific Research. The third author is grateful for the support of Texas A&M University at Qatar. The last author gratefully acknowledges the financial support from the Scientific and Technological Research Council of Turkey through Grant MAG-107M053. This author is also grateful for the support provided by the Fulbright Visiting Scholar Program

A high-order FEM formulation for free and forced vibration analysis of a nonlocal nonlinear graded Timoshenko nanobeam based on the weak form quadrature element method

The purpose of this paper is to provide a high-order finite element method (FEM) formulation of nonlocal nonlinear nonlocal graded Timoshenko based on the weak form quadrature element method (WQEM). This formulation offers the advantages and flexibility of the FEM without its limiting low-order accuracy. The nanobeam theory accounts for the von Kármán geometric nonlinearity in addition to Eringen’s nonlocal constitutive models. For the sake of generality, a nonlinear foundation is included in the formulation. The proposed formulation generates high-order derivative terms that cannot be accounted for using regular first- or second-order interpolation functions. Hamilton’s principle is used to derive the variational statement which is discretized using WQEM. The results of a WQEM free vibration study are assessed using data obtained from a similar problem solved by the differential quadrature method (DQM). The study shows that WQEM can offer the same accuracy as DQM with a reduced computational cost. Currently the literature describes a small number of high-order numerical forced vibration problems, the majority of which are limited to DQM. To obtain forced vibration solutions using WQEM, the authors propose two different methods to obtain frequency response curves. The obtained results indicate that the frequency response curves generated by either method closely match their DQM counterparts obtained from the literature, and this is despite the low mesh density used for the WQEM systems.Other Information Published in: Archive of Applied Mechanics License: https://creativecommons.org/licenses/by/4.0See article on publisher's website: http://dx.doi.org/10.1007/s00419-020-01713-3</p